Having problems with your Digital Cameras ?

I have a canon mvx300 camcorder and the tape will not eject.It was working fine then a message flashed up to eject the tape but it would not eject.What can I do?

Answers :

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a canon mvx300 camcorder and the tape will not eject.It was working fine then a message flashed up to eject the tape but it would not eject.What can I do?

... Digital Cameras

I borrowed a JVC Mini DV camera Model No. GR-D290EK from a friend yesterday, when it came to me wanting to rewind the tape and offload the data onto my PC the camera screen came up with a message...03 Eject and re-insert tape. Unit in safeguard mode. I went through the eject procedure but it won't eject the tape, can anyone help. I would be most grateful.

... JVC Digital Cameras


... Digital Cameras

Put a new fully charged battery in - the camera would lasted for a couple of minutes and then would not switch on. The battery works fine in an identical camera. Put in a second battery - that worked for a bit then started flashing battery problem and wouldn't switch on. 5 minutes later - it did switch on - lasted for a short time and then started flashing ERR 99, and then wouldn't switch on again. Battery works fine in an identical camera. 10 minutes later - started working again, but the Sigma

It is due to some kind of electrical contact failure. For more \015\012details and common causes of Err 99 read the following article:http://www.lensrentals.com/news/2008.12.31/canon-err99 ... Canon Digital Rebel XT / EOS 350D Digital Camera with EF-S 17-85mm IS Lens

My Canon ZR200 camera will not eject the tape. I never had this problem before. Camera has never been dropped but all of a sudden the message to eject tape showed up but it won't do it. After repeated emails to Canon it is evident that they are not going to give me the info to remove the tape myself. They want me to send it in (for a price to be determined after I send it in) or to trade up at a cost. I don't want to do either, just get the tape out of camera. I don't even care if it never work

Does anyone have the help I need to get a service manual for a Canon\015\012ZR200 digital Mini DV video camera. I need help in opening the camera\015\012to get the tape out. It will not eject the tape and I need to get it\015\012out for a customer. B ... Digital Cameras

My cannon mvx200i won't accept the tapes any more. There is a red symbol of a tape flashing on the screen. it was working fine, everything else seemed to be working fine, I took one tape out and from there it wouldn't accept the tapes. What is the problem?

Hi, First off how long have you owned the camera? I would suggest you contact canon and have the camera serviced. There is most likely a broken/defective part in the camera. Follow this link to find the nearest service center. I am assuming you ... Digital Cameras

Camera will not accept a tape. auto ejects without dropping into camera and an intermittent high pitched beep sounds. was working fine. last cartridge ejected, the tape was pulled out a bit when taken out of camera.

Possibly there is moisture in your camera. Please inform us of the exact model of your camera and how many beeps it may give in a row so we can narrow down your problem.I would first leave the camera to sit overnight and see if it works i ... Digital Cameras

Hai i have a sony gv-hd700 i ejected the tape and after inserting new tape, the cassette compartment is not closing. it is showing c:32:11, a quick flashing "eject symbol" is displayed and asks for re-insert power source correctly. tried doing everything. HELP

... Digital Cameras

My daughter drropped her coolpix s8000 camera. It landed on the corner near the flash and bent in a little. The flash would not open up. I had to bend ti back so the flash will now pop up. However, the flash does not work with a message that says the flash is not fully raised. Where is the senso for the flash being raised?

I had the same issue, droped camera then even if flash is opened the flash was no triggered. As Paul said I found the sensor for sensing the flash position, I made a few trials then I soldered one pin of the sensor to the sensor's case like in the pi ... Nikon COOLPIX S8000 Digital Camera

Warranty I want to know the warranty on this camera because i recently got one as a gift around Christmas 2006 and it has been working fine until yesterday when it would turn on but it would make this strange noise and it would start flashing the camera randomly for about 5 seconds then it would turn off. please help me. i want to see if i can get a new one. e-mail is [email protected] or [email protected]

Was the Camera registered on purchase?\015\012 The warranty detail comes with the box/\015\012that not withstanding if you can furnish camera detail -the item number, dater and place of purchase and contact customer support at Casio and they will tak ... Casio EXILIM ZOOM EX-Z60 Digital Camera

Just had my Canon Powershot s1 is flash explode in my face at a meeting with over 30 people attending. I took a picture, the flash went up and suddenly it popped so loud that people ducked. There was also a fire/smoke smell coming from the flash area. Very scary. Those witnessing said they would back me up if suit filed. Checked the batteries and they work fine. The camera will take pictures still but without a flash. Hear of anything like this before? Recall issue?

Lawsuit?? ... lol\015\012\015\012I had a similar experience (no fire, only a loud explosion and lot of smoke). Canon was kind enough to fix the camera for free!!\015\012I called Canon after the incident and spoke to a representativ ... Canon PowerShot S1 IS Digital Camera

I have a Canon Elura 100 Mini DV Camcorder. Previously there were times when it would not eject a tape until it stubbornly decided to. Now it will not accept a tape. The spindles turn & it makes a running sound, the little tape door will close but then pop back open. Any thoughts on what this could be?

... Digital Cameras

Error 5 ! Canon Rebel Xti w/ 28-135mm It was working fine! had it for 10 day's and after about 560 images taken ( 4 gig flash card ) The message read : "The built in flash auto pop up was obstracted... turn it off and on again..same problem. any simple tip ? solution ? or take it back to the dealer. I appreciate your Help ! Peter Toronto

\015\012Try the scotch tape or masking tape technique: get around two to three inches long sticky tape, stick about an inch above the flash housing, turn on the camera, hold the remaining tape upward , shoot the came ... Digital Cameras

Have been using a sandisk extreme III 2.o gb compact flash for my canon rebel xti Has worked fine but decided to try the new sandisk extreme III compact flash 30 mb gb memory card. The camera said there was a problem with the cf card and to replace it, so I put the 2.0 gb card in and am now getting the same message. What should I do?

... Canon Digital Cameras

Samsung camcorder VP-D6050i When attempting to record on DV cassette LCD shows"eject" and a flashing message Uppword arrow .. L In attempting to replace DV cassette holder opens but no upward movement to take out the cassette. It is jamed in position. Similar LCD message when in play mode.

First off how long have you owned the camcorder and how long have you had this problem. Once I get more information I can assist you appropriately.Thank you,Lee ... Digital Cameras

Hello. I have problems taking pictures with my Cobra DCA1030 indoors. The flash either seems to be entirely too bright or if I don't use the flash the picture is too dark. Pictures taken outdoors turn out fine but I wish I could use it indoors as well. I wasn't sure if there were any recommended settings that would make for better indoor pictures? Thank you, Jason S

Check your ISO setting...it may be too high. ... Cobra Digital DCA1030 Digital Camera

The tape wont come out and i get the message unit is safeguard mode. How can I eject the mini dv tape

Ok, if the unit is in safeguard mode it thinks it has been dropped. since it is giving the message it is getting through the boot sequence to that so you are close to the answer. taking out the batery and attempting to turn it on will reset the senso ... Digital Cameras

Hi I have a Canon A460 which has worked fine. My problem is with the transfer of images to the computer. I get either a message saying camera not found or I get a message saying camera detected with a box underneath where I would expect to see zoombrowser or another software to launch the action. The box is empty so I can't select anything. This has only just happened recently. Probably around the time I installed a Canon MP270 printer/scanner (which is a pig to use). Thanks Pat

Well, obviously your registry has changed and your camera is no longer recognized. No problem....just get a card reader and use it in place of your camera. That's what the pros do. ... Canon PowerShot A460 Digital Camera

I have a Sony HDR-HC7E handycam and it came up with the same error message. E:62:10. I was taping (it uses a digital tape) and it shuddered and started going silly. I can still get it to work and record most of the time but the flashing NEVER stops. I don't want to hit it as so many people suggest

... Sony Cyber-shot DSC-T10 Digital Camera

No picture the camera doesn't "see" anything - all other parts seem to work, I aim it, shoot, the flash goes off but no screen and no image is taken.  I can access the menu fine. figures this would happen on my vacation to Hawai'i (it worked fine just before I left - could the airport screeners have messed it up?)

Same thing happened with mine. There is a recall on these cameras. I don't know what it's called, but the part that actually captures the image is defective on many of these cameras. There is a recall notice and form on the Nikon site somewhere. I fi ... Nikon Coolpix 5700 Digital Camera

When I connect my camera through any USB port on my macbook, the transfer process will always begin fine, however the process will not complete. I get a "failed to transfer the image" error message as well as an inadvertent USB device ejection message. Is it the camera? cord? card?

Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Olympus Stylus 830 Digital Camera

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

Corrupt images Anything I take in the portrait, landscape, the green box, or close up end up corrupt. The manual settings along with the fast action, no flash and night time settings work fine... I have formated the card, I have tried everything can think of. I even looked through the whole manual. I tried a second card... nothing, why would those four settings not work and the rest are fine?

Try updating firmware from canons website under support fixes all sorts of weird problems ... Canon Digital Rebel XT / EOS 350D Digital Camera with EF-S 17-85mm IS Lens

I have a cyber shot DSC-S80 which has been working fine for ages. However I deleted some photos from the memory stick whilst it was in my computer and now I get the 'memory stick error' message flashing everytime I turn the camera on with it in. It works fine in the computer still. Is there a way round this problem? Tried checking for errors with the windows system of my laptop and says there are not any.

Try to format memory stick with the camera's facilities. Maybe the camera doesn't recognize the stick.\012\012\012You can try another memory stick to know exactly what it happened. ... Sony Cyber-Shot DSC-S80 Digital Camera

I have an Olympus D-460 Zoom 1.3 megapixel which I've had about a year. I bought it used and it was working fine up until about a week ago. Whenever I snapped a picture the button seemed to get stuck and nothing would happen and also the flash wouldn't go off. I would have to close the lens and re-open it again to get it working. Do you think that maybe the batteries I'm using are too weak? Let me know. Thanks.

Yes, you are right. The batteries have gone out of power for sure. I had a similar problem with my cam sometime before. The battery actually doesnt gets 100% discharged. Itworks whenever you repower the cam. But when taking a picture it just needs mo ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2442 seconds