Having problems with your Digital Cameras ?
Dear brother i have problem coming up in my Benq DC E 1000 digital camera, i need help
when i switched on my camera it automatically zooms in and out even also the menu and setting gona chage itself, i could not do any thing expect turn it off again :(
please advise me, i'll be very thankfull.
It shows that the System Control Section got faulty needs to be fixed technically, i advised to take it to the nearest cannon service center for assistance.\012
Repair Help & Product Troubleshooting for Digital Cameras
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Dear brother i have problem coming up in my Benq DC E 1000 digital camera, i need help when i switched on my camera it automatically zooms in and out even also the menu and setting gona chage itself, i could not do any thing expect turn it off again :( please advise me, i'll be very thankfull.
It shows that the System Control Section got faulty needs to be fixed technically, i advised to take it to the nearest cannon service center for assistance.\012\012Good Luck ... Digital Cameras
My cannon rebel will not take picture or go to the menu the only thing it will do is turn on. And when i turn it on a message pops up that says "shooting is not possible. Turn the power switch to off and on again or re-install the battery." I have tried turning the camera on and off and reinstalling the battery multiple times but nothing works. Do i have to take my camera to a camera shop to get fixed or could i do something at home to fix it??
I think either shutter unit or cmos unit faulty. you cant fix at home you have take to canon repaired centre ... Canon EOS Rebel XSi Digital Camera
My camera would not go on, I changed batteries etc, then I took the card out and the camera when on but i could not take pictures, When I put the card in again it would not go on. i took it to a camera place and they tried another card but the same thing happened. They said that the problem lay with the card dock, is there anything can be done. Just today now I noticed that when turned the camera on again it stayed on and would not turn of for awhile ( no card in it).. I juggled the batteries a
... Canon PowerShot A75 Digital Camera
Sanyo vpc 51415 5x digital camera I assumed the batteries were dead because when I turned the camera on it immediatly turn right back off. But when I placed new batteries i it did the same thing. What could be wrong?
... Sanyo Digital Cameras
Sony-cyber-shot dsc-w50 I blieve that the battery if fully charged however when I turn the camera on all i see is a blank screen saying "access" with the lense zooming in and out then a message comes up on the sceen saying "turn camera on and off" I do this and the same thing keeps happening, could you please help? Sara
Lens unit is faulty, may have had sand or damage at some time, focus assembly inside the lens is not focussing ... Sony Cyber-Shot DSC-S40 Digital Camera
Broken camera My daughter has a FE 140 Olympus Digital Camera. We have had some problems. When you turn it on it beeps, the red light flashes, and the lenses goes in and out. The same thing happens when we try to download pictures, except that the camera will shut off, leaving the lense out. Do you have any idea what could be wrong?
In addition to the one year World Wide Warranty,\015\012issued by Olympus Corporation in Japan, the European warranty, issued by Olympus Imaging Europa GmbH, is\015\012valid for two years from the date of purchase, if purchased after 1st ... Olympus FE-140 Digital Camera
Hi! I took several shots yesterday and went to upload the pix on my computer today and when I connected the camera to my computer the battery was at 100%. Then the camera completely shut off. I tried turning it back on with no result. I recharged the battery with the same result. I figured my battery must be dead ( yet only 1 year old) and purchased a new one. I fully charged that one and plugged my camera in again and the same thing happened! What could this be caused from? No damage has ever
Power surge? ESD (Electro-Static Discharge) = your camera got zapped by static electricity (like when you rub your shoes on a carpet on a dry wintry day then go and touch a door knob. That static electricity!) Integrated circuits (ICs) only need o ... Digital Cameras
CF error I own a Canon 400D. It worked perfectly until today. I inserted the cf card, and turned on the camera. It took a couple of seconds to light up, and I got a message that the cf card was faulty and needs to be replaced. I used another one...it said the same thing. I tried reformatting. It gave me an err99 and then said that "shooting is not possible" I formatted the card on the computer...no luck. The pins are in place, I checked. What could be the problem and how could I go about solving
My canon xti had the same reading cf card error 99.\015\012Since my camera is out of warranty. I had to find a way to fix it. After reading all possible solutions in this site, I looked at the pins (that used to connect to the CF card) and foun ... Canon EOS 400D / Rebel XTi Digital Camera
Hello there, i have a tm700 from panasonic and it seems like the camcorder has some focus or depth of field issues, it always been working good until last week when i turned it on everything is out of focus, i tried geting focus back with auto focusand tried it with focus ring but it just seems impossible. only things that are focus are the things about an inch from the lense and i can get it focused if i zoom in a little... its odd because nothing really hapenned to the camera that could have
Inside the lens assembly, the focusing ring is controlled by electromagnets with feedback from the microprocessor and CCD sensor. Many things can effect the focusing circuit, but the most likely things would be any dirt, dust, or lint obstructing t ... Digital Cameras
I got my Fujifilm FInepix J28 camera for Christmas (2 weeks ago) It's not great; but come on i'm 12; what more do I need? I was off school yesterday and reading the manual that was telling me to do all sorts of things; turn off then back on press this look at the quality, now in a light room, blah blah blah. Later that evening i went down to show my mum what my COOL new camera could do to find there was a 'zoom error' < BTW; THESE CAN NEVER BE FIXED; Bummed, as you can imagine :/ really depresse
Dropped my Fujofilm FinePix J28 camera, fludi damage to the screen and it come up zoom error, can anyone help? ... Fuji FinePix S304 Digital Camera
I cannot turn the camera on. I guess it was dameged during my holidaying. I recall that, the camera was excidently turned on inside its holder and as the mechanism tried to push the lense out from the body it was blocked by the bag holding the camera. Now, when I try turning the camera on, the lense could not move forward at all. It gives cracking noises and turns itself off. Could this problem be fixed or better to buy a new camera? Arthur
If your camera isn't under warranty, I think that it has no worth to repair it by the after-sales.\015\012But you can try to fix it by your self, anyway there will be no loss for a bad camera.\015\012May be this post will be any helpful: ... Pentax Optio 60 Digital Camera
Unknown I dont now the specific part name, but the thing that extends out that also has the lense on it wont extend when i push power. All i can do is acess my pictures, but when i flip it to take a picture it wont extend out, and the camera turns itself off. I already tried replacing batteries. Could someone help me?
Easy just grab it pull and twist and pull it to full out and power it on and off ... Fuji FinePix E550 Digital Camera
I have a Cannon Powershot SD 450 Digital Elph camera that started giving me problems when you turn it on it starts up and then beeps and sutsdown giving me a e18 error at this point the thing is not worth a sh_T and I am looking for help with software that might reset it or anything that could work.
Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon Digital Cameras
Two things....my approx.18 month old battery died and i bought a replacement yesterday. is this the normal life expectancy? 2nd. Today, with a totally charged battery, I took eight pictures. Later I wanted to review the pics and when I pushed the on/off button, the lens came out but no image appeared. I could not shut off the camera, so had to pop the battery out. I am not sure now if the lens went back in. I pushed the on button again and the lens moved out; the display lit up with the message
To answer your questions, depending on how much use, (meaning how many snap shoots) will dictate whether your camera has reached its life expectancy. The proper procedure for long life with the battery is to have it totally drain out be ... Kodak EasyShare M1033 Digital Camera
HI, my Canon XH A1 stopped suddenly working. The odd thing is that it works in VCR mode but not as a camera, I forgot to turn it off today and then transported it, in it's safe bag, when I took it out (it was outside in this temperature) it wasn't working any longer. I thought it was the battery, but I recharged the batttery at home and it's still not working. What could it be?
... Canon Digital Cameras
When i turn my camera on the orange light is the only thing that works on it nothing else works. could someone please tell me if its trash or is it worth fixing?
I'm not quite sure what you mean by the orange thing in your fault description, but here are the steps for the no power problem and information on a possible repair solution:\015\0121. Make sure you will install a new or fully charged battery/b ... Kodak EasyShare C533 Digital Camera
Dropped Camera. Basically, the thing stopped working. DMC-FZ1 It was dropped from a tripod it landed Lens DOWN. So it kind of smashed into it maybe? But nothing on the outside seems to be actually broken. The lens is crooked, but thats all that seems to be wrong. Yet it won't turn on at all. Maybe if someone could suggest something? Perhaps maybe something needs to be fidgeted around inside? Or is it a better idea if I pay a professional? But whatever the case. Anyone who has any suggestions it
The lens motor mechanism is very fragile and will stoppworkin even if you look at it too hard let alone drop it.The cost of repair will be high - best bet is to write it off[are you insured against acciden ... Panasonic Lumix DMC-FZ1 Digital Camera
Zoom broken my camera was on then bed & the zoom was out to normal level. i tripped and fell on it & now the inner bit of the zoom is wedged at an andgle and wont move. i tried turning the camera on to see if it could move it at all itself and the mechanism tries 5 times then gives up and the camera turns off without turning the screen on. Does this sound fixable as i only got it xmas '07 and my dad never took out the insurance. If yes any ideas where I could take it/send it to get it fixed? I l
The impact damaged has jammed you lens assembly. I see these all the time in my shop. If it can be repaired without parts a shop should be able to do it for you for around $75. If it needs a new lens however it will not be worth the cost (the part ... Olympus FE-210 Digital Camera
This Sucks! My camera is new, I went to use it...actually for something I saw that was hillariious...and I turned it on, the lens came out...it was zoomed all the way, and I could'nt take the pic nor could I adjust the zoom. Then I got this hateful message to turn camera off then on again, which I did. Now the lens does not return apon turning the power off, but does retract and come back out when I turn it on...and then the same scenario! Help Please!!!!!!!
I think this is just a hardware malfunction(some mech. switch) because, i have a lz7 and when i deliberately open the battery case with the camera power on it obviously switches off and then when u close the battery case either with the power on or o ... Panasonic Lumix DMC-LZ7 Digital Camera
Panasonic Lumix DMC-LZ2 Image 'melts' into streaky vertical lines when camera is turned on. This problem started occuring immediately after I found my kids deliberately turning the camera off while jamming the lens cover open, so they could get the 'turn camera off and then on again' error message (yes, I know - they've been banned from touching it again). I confiscated the camera, turned it off and it sat unused for about 3 days. When it was next turned on, the image on the LCD screen was
... Panasonic Lumix DMC-LZ2 Digital Camera
Shutter malfunction few weeks ago I moved and when I began unpacking and got to my camera, I discovered that something had spilled in the box and was coating the camera. I dried it off as best I could, and turned it on. It worked normally. A few days later, I noticed that whatever had spilled on it, that I hadn't been able to clean off, formed a strange gel like coating around some of the buttons. I again cleaned off what I could get to, and again, turned the camera on, and about a second later,
It sounds like a part of your electronic system shorted. It's unusual anything works at all. \015\012THe front and back housing fit together like a **** shell. After you have removed all the screws gently pry a thin blade between the halves and ... Nikon Coolpix L11 Digital Camera
Hi we bought a vivitar v8324 for our parents for christmas who are not technically minded at all and hoped it would be a nice and easy and shoot, as there is no detailed manual in the box could you please tell me how do we make sure that the flash is on automatic every time they turn the camera on? we keep setting it to be auto flash but each time we turn the camera back on it has turned of again. Is there a manual of some sort that we could download for them as having something in front of them
You should contact Vivitar directly at www.vivitar.com You can e-mail them or call either way they should be ableto get you what you need. I hope this helps. SuperRichard37 ... Vivitar V8324 Digital Camera
Hi i have a CANON A1000 IS and I just got it a week ago and the batteries lasted me 2 days. I tried charging my camera but when i went to turn my camera back on it said low batteries then immedietly after the screen went black and at the bottom it said change batteries. So I put in new derecel batteries and i turned it on and it showed the same thing. low batterie then change batteries right after. Do you know whats going on with this thing? How do I charge the camera?
Hello,\015\012Are you installing Nmh (Nickle- Metal Hydride) rechargable batteries?\015\012If not then your camera probably will not recharege them.\015\012Also trying to recharge non rechargable batteries can cause damage to the ba ... Canon PowerShot S100 Digital Camera
I have two issues with my Canon EOS Rebel XS. One issue has been acting up for a while: If I turn the camera on and try to shoot, it tells me shooting is not possible and to turn the camera off and on again or redo the battery insertion. The only thing that works is if I take the battery out and in and turn the camera on again. The second problem started yesterday. My camera would not turn on so I thought the battery was uncharged even though I got no message saying that. But after chargi
Hi,\015\012\015\012You may get the ERR XX before (Shooting is not possible, Turn the power switch to off and on again or reinstall the battery) , where XX is the error number..\015\012\015\012Please leave the error numb ... Digital Cameras
I own an 8.2 megapixel Fujifilm Finepix J12 digital camera. I have always been very careful with it, and not had any problems until today, when I made a short video, and uploaded it to my computer from the memory card. I returned the memory card to the camera, and when I went to turn the camera on again, the camera turned on but the screen is staying black. I have tried removing the battery and memory card again, turning the camera on and off, and the same thing is happening every time. I did no
When you removed the card from the computer, did you forget to use the "safely remove hardware" function? ... Fuji FinePix J12 Digital Camera