Having problems with your Digital Cameras ?

S3is camera powers on but display is blank - Digital Cameras


Answers :

If it doesnt work you can get a free repair estimate from
\015\012
\015\012http://www.advancecamera.com/repair/
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

S3is camera powers on but display is blank - Digital Cameras


If it doesnt work you can get a free repair estimate from\015\012\015\012http://www.advancecamera.com/repair/ ... Digital Cameras

Blank LCD My sony DSC T5 camera LCD display is blank. When the slider is pushed the green LED is on but screen is blank. When you try to power off the camera it does not power off, the LED remains on. Removing the battery power it off. Any guesses I am very handy at reparing electronics.


Camera of this type are not usually repairable. No Parts.Like toasters/ kettles etc they are considered 'disposable'But don't take my word for it - check out the makers support page ... Sony Cyber-Shot DSC-T5 Digital Camera

I have Canon EOS 300D digital Rebel. I have had intermittent problem with the camera display screen going blank even though I put a freshly charged battery in. Usually I can take a couple pictures then the camera becomes non-responsive with a blank display screen; if I pull the battery out and re-insert it, the camera will take a few more pictures before the same things happens. Any suggestions?


Strange, intermittent problems with the EOS Digital Rebels can be caused by a defective shutter release switch. We charge about $85 to replace it. ... Canon Digital Cameras

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!


You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera

When powering up, "Sony" logo appears on display then display goes blank. Cannot power down (green light next to power button stays on after pressing power button. Thought battery needed replacement. Replaced with new battery - same problem. Purchased camera approx 1 year ago. Thx.


There is a firmware problem. The company will fix it for $50. It's fairly common now days with most cameras. ... Sony Cyber-shot DSC-H10/B Digital Camera

SONY Cybershot - no display. The power is on. Camera was not abused. It seems like the rest of the camera in operational but the display screen on the back of the camera is blank.


... Sony Cyber-Shot DSC-S40 Digital Camera

I dropped my JD DIGITAL 5.0z3C and the zoom lens got out of its original position such that it can not move when camera is powered on.when i power on the camera,it does not display any thing.how do i fix this problem?


... Jenoptik Digital Cameras

When FinePix V10 digital camera is switched on the LCD screen is blank, The lens works but does not display picture. FujiFilm Digital Camera FinePix V10


Hi, When you say the screen is "blank" Is it totally blank or do the icons appear on screen? can you review any previous pictures etc?\015\012As the camera still powers up it is possible that the ribbon for the screen has popped out of it's soc ... Fuji Digital Cameras

My olmypus fe-310 digital camera has a white display screen. The camera still takes pictures and all of the controls work and it makes all the noises it's supposed to make but the display screen is blank.


The problem you are describing is a problem with one of the chips in the camera that controls image processing. It seems to have failed and needs to be replaced. Following are the instructions to send your camera to Olympus for service.\015\0 ... Olympus FE-310 Digital Camera

Green light on camera back to the right of the 'delete' button continually flashes on-off about 1 second intervals as soon as battery is inserted as long as CF card is in place. Switching camera ON produces no visible operational indicators. Depressing "Menu" button flashes: hour glass; menu display; blank screen. Holding button down just cycles as above. Swapped lens, data card, battery, connected EH-5 power source; nothing makes any difference. Checked same lens in another D70 camera; it's OK.


I would start by looking into the memory card slot to see if you have a bent pin. You may need a small light and a magnifying glass to see them. If the pins are okay, then you can try a reset by holding down the BKT and metering buttons toget ... Nikon D70s Digital Camera with 18-200mm lens

The lens on my Canon digital camera will not close... i am unable to take a pciture and do not know the reason for this....when the camera is put on i am able to see my old pictures but when i click to take a new picture the screen is blank..i dont know what to do...please help...i have the canon power shot sd 500 camera and the problem that appears is the E18...... please help me


OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Camera: Sony A100 Doesn't power up from internal batter ( just blincking of power up red indicator, all other functios dead) Powers up from DC adapter Display shows "bulb" No focusing No shutter release Full access to menus Records blank image to memory card ????????????? HELP, please... with regards/Peter Bacler


... Sony Alpha DSLR-A330 Digital Camera

Can not download pictures on computer- "Communication error" showing on camera display window; camera chip 2GB with 4100 pictures. Tried using another 2GB chip with less than 100 pictures in it without any problem. My camera was a cannon Power shot SD800 IS digital ELPH


Start deleting pictures base on how good they are, importance and priority. Then by trial and error delete 50 pictures, download; 100 ... 200. Finally it download ... after 10-15 seconds wait. Total pictures deleted 1700 out of 4200. So there is a li ... Digital Cameras

Hi welcomejee, I read all your solutions regarding the digital camera Sony DSC N2. I really have to thank you for your precious Some of the problems are very similar to mine: After the camera fell on the ground from about 2 meters in off mode the lens would come out and immediately back in 4 times in a row. After that the lens is back in, a beeping sound comes up and on the display it is written to "Turn the power off and on again". Of course that does not help at all. The lens is opening


George, this is most likely a lens issue, and more precisely, probably a stripped gear when it fell. You will have to disassemble the entire unit to get at the lens assembly, and will probably be a professional by the time you get through! ... Digital Cameras

Digital Camera: Canon PowerShot S410. Display screen is blank, although can see through eye hole. Pictures come out blank as well! Lens zoom-in/out works fine.


Hi,\015\012Its CCD imager problem in your Canon S410 camera. Canon will repair it Free Of Cost. See ... Digital Cameras

I own a canon s2 is power shot. Symptoms began with the digital zoom beeping and the screen going blank when invoked to draw an image closer. After a periood of time of avoiding the zoom, the camera lense stuck inside and gave an e18 message when beeping. I could still survey old pics but can't take new pics as the screen is blank and the lense won't come out. The warranty expired 10 months ago, I've tried forced air, changing batteries and mem card and pressing on the lense. The lense is off to


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Canon PowerShot S2 IS Digital Camera

Hi, I have an Olumpus digital camera, which accedentially fell down from a very less height. and now it is not working, the lens is not going inside n if we switch the power on or off, the lens just moves round n goes in n out just a little. we can view the photos which have taken previously, jsut that we cannot click the photos and also the digital display is also blankt. Please let me know what to do and also let me know the nearest service center, I reside in Bangalore, India. Thank you


... Olympus Digital Cameras

HP SB360 Digital Camera will not power on. Press the power button the led flashes green and turns off. The lcd screen is blank. Any ideas?


... HP SB360 Digital Camera

I have a Fuji F470 digital camera. It was dropped. Now when I turn it on, the screen displays Finepix, then goes blank.  It seems to take pictures,,,lens moves in and out and flash works, but I can not see anything on the display.


Hi, when you drop it , it broke the color chips sensor , to make it repair , the coast it always arround 125.00 and + , so i sujest , your can try your waranty or buying brand new , ( factorydirect.ca ) they have good price yvon chow !!! ... Fuji FinePix F470 Digital Camera

Canon Power Shot S400 Digital ELPH camera. Screen display shows memory card full all ther time. I have tried a new memory card. The camera was in mt coat pocket when I took a fall up a kerb!!


Actually, see the following Canon advisory. When the little button timer battery in the camera eventually dies, it can cause this type of problem. The solution is to replace this little battery. Canon will do this for free, or will ship you the ba ... Canon Digital Cameras

Canon Digital rebel EOS, purchased april 2004. Mid session, the camera started to take pictures that were blank on bottom 3/4 of frame. Boundary between black and normal portions of picture are fuzzy, not a clear line, LCD works, displaying normally on images taken prior to malfunction. Downloaded pictures present the same way. I cycled camera on and off, tested and reformatted 1GB CF card. No difference. HELP


Hi\015\012\015\012Unfortunately this may be a CCD failure and the camera will have to go back to Canon for service.\015\012\015\012However you can try the following and if you are lucky you may get a result\015\012 ... Canon Rebel XT / EOS 350D Digital Camera

Samsung S860 hi, i recently bought a Samsung S860. i had to select samsung S850 because there was no option for my camera digital camera. and it wont switch on, the battery is full, when i switch it on, it powers up and the screen stays blank, i was in a rush earlier so i didnt have time to go to Safely remove hardware on my PC, could this have affected it and what can i do to fix it


Hmm,\015\012while plugged up to a usb to computer it might be blank...\015\012\015\012I would plug it up and go to "my computer" and find the drive (usally the last letter like g) and find folders and and open them and store the pic ... Samsung S850 Digital Camera

Camera powers on but no display - Nikon Coolpix 2100 Digital Camera


Try resetting the camera by removing the battery, wait 15 mins and then insert the battery, you will need to set the date and time again. ... Nikon Coolpix 2100 Digital Camera

I Use a fully charged(more than 14 hrs charged) New Sanyo battery 2700 mAH Ni MH rechargeable on my Sony Cyber Shot DSC-W5 Digital camera, when the power is on the battery display shown fully charged.. but after a few shot (2-3) there is no more power...what the problem? please help..


May be batteries you brought are old try with normal ( not rechargeble ) batteries. it would not last long but you can take atleast 30 to 50 photos. if it works it means new batteries are faulty.this type of problem i never saw in camera.use SANYO ha ... Sony Cyber-Shot DSC-W5 Digital Camera

On my GE E1050TW digital camera, when i start it up, it has a list of options such as '640x480p NTSC 4:3' and '720x576p PAL 16:9'. When i choose one of these options, another screen comes up with three options, 'YCbCr444', 'YCbCr422' and 'RGB444'. The first two are shaded grey and the last one is the only one i can click. when i do, the screen goes blank but the power light stays on. What ever i do, i cannot do anything to make my camera work. Is there a way of resetting it or something to make


These are output settings for when you want to connect the camera to a tv. If you were connected to a tv, when your screen goes blank, the picture would appear on the tv screen. ... General Electric Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4721 seconds