Having problems with your Digital Cameras ?
The time and date setting deeps erasing itself everytime my camera is turned off Cannon A480
This model isn't all that old but I suspect the internal "button" type watch battery has gone dead. This little battery is what keeps the date/time going when the camera is shut off and "normally" last upwards to five years from date of manufacture not date of purchase.
Repair Help & Product Troubleshooting for Digital Cameras
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The time and date setting deeps erasing itself everytime my camera is turned off Cannon A480
This model isn't all that old but I suspect the internal "button" type watch battery has gone dead. This little battery is what keeps the date/time going when the camera is shut off and "normally" last upwards to five years from date of manufacture ... Digital Cameras
Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.
The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera
Everytime I turn the camera on, it's asks to set the time/date. No matter how many times I HAVE set it, it always comes on again. So to use the camera I have to always go thru the "do you want to set the date stuff" first.
---- This is a problem many Coolpix S710 owners have had and many have had a defective internal battery (it keeps the time and date). To see if yours is defective, fully charge the main battery, put it in the camera and let it set with the power butt ... Nikon COOLPIX S710 Digital Camera
My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?
\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera
Have been given a FinePix A330 camera with no instructions - cords etc. and have it sort of working, but can't find out how to turn it off. Everytime I try, it takes a photo. Was given a 2gb. XD card, but it will not work - says it is not formatted. I now have a 16mg. card and it works. Have the date set, but need to be able to turn it off without waiting for it to turn itself off. Thank you, Nat Morgan
You can download the user manual from the following site: http://www.retrevo.com/support/FujiFilm-A330-Digital-Cameras-manual/id/200ci271/t/2/Look for instructions in the manual. ... Fuji FinePix A330 Digital Camera
I have a cannon power shot A580, about one month old and it keeps asking for the date and time everytime i switch it on, even though i have replaced the date battery and the camera batteries, and set the date and time in the menu time and time again!!! HELP
If you've replaced the date battery, then the camera is defective. Being only a month old, first recommend seeing if your retailer will exchange it. If not, Canon will fix for free under warranty. Call 1-800-OK-CANON. ... Digital Cameras
Ixus 80 IS - Won't save date and time Everytime I turn my camera on it asks me to set the date and time, the manual says it has an inbuilt battery (I don't think it is changeable), is there anything I can do ?
After setting the date and time, press the set/ok/menu (whichever one you press at the end) button twice. ... Canon IXUS 80 IS Digital Camera
Everytime I set time and date, camera turns off.
Memory battery present?? (coin type) ... Kodak EASYSHARE M1063 Digital Camera
When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.
Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera
Everytime I turn on my camera, it resets the date and time and prompts me to set one.
Clock battery is dead. It's a small button battery located inside the camera. The part number is: MS614. Hope this helps. ... Canon PowerShot SD1100 IS Digital Camera
Every time I turn my camera off I have to reset the time and date when I turn it back on. When I first got this camera I could set the time and date and it would stay set until I changed the batteries. what is the problem and how do I fix it?
The small internal battery has died.It will need to be replaced at a camera repair center. ... Polaroid A500 Digital Camera
Everytime I turn the camera on the time and date
There are two batteries in the camera. One is the big one you charge and the other is a little coin type battery. This coin battery maintains your settings and when it goes your camera forgets things. Same setup on computers and a lot of other electr ... Canon PowerShot A520 Digital Camera
I have to set the date each time I turn on my Nikon S9 camera even when the battery is fully charged I have the Same Problem .. every time i turn ON the Camera .. it ask's me for the Date & Time .. that accoreded after my camera had a bad fall on the ground ?_?
... Canon PowerShot SX100 IS Digital Camera
Kodak easyshare z712IS. sounds like a typical problem but...I try to turn it on, lens only comes out a little bit, then it turns off. I replace the batteries and the set time and date comes on...I set time and date camera turns off. I CAN in fact view pictures in the gallery but as far as taking pictures....nothing.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare Z712 Digital Camera
The camera is 2 years old, when turning on the power it goes to the date set,you can change the year, then it slides over to the month, but seems froze up, then the camera resets itself, if you skip the date set up, it shows a view on the lcd, but can't take a picture, and the camera resets again. My son borrowed it and took pictures snorkeling, so it may have gotten wet, but the lcd screen is not distorted as it was a year ago when I got water in it.
... Olympus Stylus 770 SW Digital Camera
The date will not stay set. Every time we turn the camera on it opens with the date screen. We set the date and it then goes into shoot mode but the date is not set. All pictures are stamped with the default start date. Tried a new battery already.
To keep the date on, you have to leave the camera off with a charged battery for 24 hous to charge the inner battery that keeps date on. If this doesn´t solve the problem then is because the inner battery won´t charge anymore, but it wil ... Sony Cyber-shot DSC-W120 Digital Camera
I just recently bought a kodak zd710. When i received the product, i turned on the camera and i was immediately prompted to set the date and time. Once i finished, the batteries that the camera came with had quit on me. So i went out and bought new batteries, and when i went to turn the camera on again, the LCD screen did not light up. It has yet to come on when i turn the camera on. Is there any kind of troubleshooting i can try?
Battery usually come with very little charge when new.You must first charge the battery before use the camera. ... Kodak EasyShare ZD710 Digital Camera
Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.
... Canon PowerShot S400 / IXUS 400 Digital Camera
The camera will not turn on and the lens is still open. I have already put in different batteries. when I try to turn on the camera the blue light comes on as if the camera wants to come on.. the set date will pop up and the camera shuts off
Pls. use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).\015\012Here are the steps:\015\0121. Make sure you will install a new or fully charged battery/batteries into your camera.\015\0122. Clean the batter ... Kodak EasyShare Z1275 Digital Camera
Hello I have a problem with the olypmpus stlylus tough 6000. when i turn on the camera sometimes it went to the internal memory, and when i turn off and turn on again it went to the memory card. how do i set it so that everytime when i turn on it will be in the memory card setting? thanks
When the memory card's in the unit, pictures should automatically go to the memory card, so that makes me suspect that the card isn't getting detected. I'm thinking that there may be a slightly corroded contact in the internal contacts in the camer ... Digital Cameras
Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk
You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera
Set date and time comes up every time i turn on camera
Try resetting your camera. In picture taking mode press menu. Go to setup, go up to reset, press right arrow, make sure reset is highlighted and press set.Then TAKE OUT MEMORY CARD. Go back into menu, go to setup, go up to format, pres ... Casio EXILIM ZOOM EX-Z60 Digital Camera
Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.
Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera
I just set the date stamp in the on position. Then, turned the camera off as I didn't need to take a picture. Now, when I turn it on, the lense comes out and then immediately goes back in flush and the camera is in the off position. The battery is fully charged and the camera even does this when I have it on the charger.
Hi,How long have you owned the camera? If under a year then I would recommend having it serviced by kodak under warranty. If it's over a year old you may want to try a new battery otherwise consider replacement.Thank you,Lee ... Kodak EasyShare V1003 Digital Camera
Blurry pictures I've had this camera for almost a year and everytime I want good pictures (vacation, birthdays, xmas) I'm disappointed with the quality of my pictures. So many of my pictures turn out blurry. And sometimes they'll look fine when reviewing on the camera, but when downloaded to my computer, the quality is poor. Some people say they keep their's on the auto setting, I find I need to keep mine on the nighttime setting to get decent pictures. Any sugggestions with settings, etc to hel
Try turning of the stabilizer if you have one it will be in the settings menu ... Canon PowerShot SD1000 Digital Camera