Having problems with your Digital Cameras ?

I read the lens getting stuck "Switch off and swirtch on again" solutions given by you,other than trying compressed air, but there was no joy (including tapping on the palm). In fact for a fraction of a second, the lens did focus but then again, we were back to normal (non-working mode). Would be grateful if you have any further tips. Thanks


Answers :

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I read the lens getting stuck "Switch off and swirtch on again" solutions given by you,other than trying compressed air, but there was no joy (including tapping on the palm). In fact for a fraction of a second, the lens did focus but then again, we were back to normal (non-working mode). Would be grateful if you have any further tips. Thanks


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Digital Cameras

I have a Canon Digital Rebel XT camera using a 75-300mm telephoto lens. My problem with the lens is that at times it is hard to adjust the focus either manually or automatically with the camera. I hear something rattling around inside the lens and at times the lens will not auto-focus and I have to remove the lens and manually twist it to get it back to some normal operation. Is this fixable or do I need a new lens?


It sounds like the lens has been dropped or knocked and is misaligned in the guides.Repair against new lewns is a difficult one as prices vary. I would perhaps consider replacing it with a used one. Before you do borrow a similar lens from some ... Canon Digital Cameras

Help!!! i dropped my Nikong Coolpix L11 camera on the pavement. The lens got dented in, so naturally i popped it back to its normal place i turned it on and it worked for about 30 seconds and then popped but with the image that said "Lens Error". So i turned it off then turned it back on and it did the same thing. It did that for about 10 minutes and now as soon as i turned it on it says "Lens Error". I cant figure out how to fix it, i've tried slightly tapping it against my desk, i've tried hol


Hellothere are tiny plastic gears inside and may have chipped or a small piece of sand got in causing the lens to jamb. "very fragile"one solution is to ask a camera repair shop how much a lens mechanism would be to replace. ( ... Nikon Coolpix L11 Digital Camera

Is there any way I can get my camera back to normal! I turned it on and it said "focus error". When I shut it off to see if it would start over correctly it would not close the lens. I turned it on and the lens closed and then opened again and wouldn't focus. I turned it off and the lens won't shut. How weird is that? It obviously is capable of opening and closing but seems to be reversed and makes a funny noise when it can't shut at the right time. Can I wiggle or giggle something? I bo


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Digital Cameras

My casio EX-S880 had that common lens error where it comes out and goes right back in - I purchased a replacement lens on eBay and it worked (came out and camera powered on like normal... only there is no picture. The LCD works (ie menu and settings) but you cannot see any picture through the lens. I have gotten my second replacement lens (thinking the replacement was no good) and it is still doing the same thing.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Casio Exilim EX-S880 Digital Camera

Bought a 3.5 macro lens.the focus ring does not work manually.This is the second such lens I have gotten(sent the first one back because of same problem).This is not corect is it?It works fine on auto focus however I should be able to focus it by hand if I want shoot different distances correct? By the way the camera is an Evolt 500


Short answer Yes!.. I am wondering if by chance you have the lens switch set to AF rather than M. It would be almot unheard of to not have manual focus, also to have 2 lenses with the same problem. No insult intended, but it sounds more like yo ... Olympus Digital Cameras

Focusing problems I have an FX-7 and it recently went through a small spate of focusing problems, both broad daylight and evening. I discovered some fain grease/hand smear on the lens. Cleaned that off (hot breath and microfibre cloth) and it went back to normal?


Yes sometimes things that seem like big trouble are nothing but small time and totally fixable problems... ... Panasonic Lumix DMC-FX7 Digital Camera

Zoom lens mis-focusing. The lens "wizzes" in and out trying to focus. The lens will eventually "settle-into" focus; but sometimes this takes a number of seconds to accomplish. Also, the lens tends to "slip-out" of focus just as the button is depressed to take the photograph. Only problem seems to be with the lens focusing.


This usually happens when you are focusing on a spot which lacks details. Try aiming you focusing area to something which has clear edges ... Canon PowerShot S1 IS Digital Camera

I have a D5000 camera w/ kit lens VR 55-200, less than a year old. Recently and only occasionally what is happening is when I press the shutter release button, the lens won't focus, it won't move in or out and it makes a odd noise, not the usual lens motor noise, but an odd squeaking noise, like it's trying to move but is stuck. The only way to correct it is to either shut the camera off and turn it back on again, or switch to manual focus, then back to auto. The battery is full, so it's not


Your camera is still under the one year Nikon warranty. Call Nikon's repair depot at 1-800-NIKON-US (1-800-645-6687) 9AM-8PM EST, Monday to Friday. They will verify your warranty and assist you in returning it for repair. ... Nikon D5000 Digital Camera

I use a Quantaray lens af ld 70-300mm 1:4-5.6 tele-macro(1:2)@62 with my Canon eos Digtal Rebel xti. I have used the camera and the lens together very well for about a year and a half. Just recently with this lens set aat normal and the camera set at af(auto focus)the lens trys to focus and will continue to search for the correct focus setting with out taking the picture. Also the lens appears to be darker when I look through the viewer. I have a Canon EFS18-55mm lens which is operating correctl


... Digital Cameras

Optio M20 Camera: Press on/off button to power up camera, the camera opens the lens cover, turns on a red led inside the lens, cycles the lens out and back in,then makes about 5 little popping noises. The back screen shows Pentax Optio screen for a second, then then the screen displays the word Auto Picture in the center of the screen and Green Mode at the bottom and at the same time it cycles the lens out and in. And for a brief moment in the back ground of the screen you can see the picture st


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

I dropped my camera and got the lens error e32 message. The lens was misaligned at first, but I straightened the lens out, so it did retract back in. Now, the problem is, when I try to take a picture, it won't focus on the subject. The green focus boxes come up, but it won't focus. What can I do?


... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Shutter frame rate drops to about 1 per sec on CH with MB D10 while using any auto focus lens. 14-24,24-70 or 70-200 and an older 20mm auto focus. With no lens or a manual focus, very old 55mm Micro, lens attached frame rate is normal.


Wow, that's weird. Does it do it with the auto-focus switch on the body turned to manual? I shoot a D300 and know pretty much everything about it there is to know and the D700 is basically the same camera with a full frame sensor. The only things I k ... Nikon D700 Digital Camera

Canon powershot sd1100 1s lens is out of focus. This happened after there was a "lens error, restart camera" in which the lens was stuck. Once the lens finally went back in and was working properly the lens was then out of focus


... Canon PowerShot SD1100 IS Digital Camera

Lens conversion I often use a telephoto lens or another type of lens such as a panoramic. I cannot get my camera to switch back to normal lens usage. I do have the Conversion Lens: OFF in the menu option. In the screen though my camera still shows W========T there is no other. Any suggestions? Usaually there is a line between the W and the T to show zoom conversion. I cannot get that back.


Check the smart zoom precision zoom setting ... Sony Cyber-shot DSC-H2 Digital Camera

Nikon 18-200mm VR lens doesn't seem to want to AF focus at full focal length 200mm distance. I bought this lens second hand on ebay and am not certain if there is a problem with this lens. If I try to shoot a picture at full focal length indoors it seem to be fine or relatively close shots but out side, full distance shots it wont work.The focal ring is at full focus and just turns with no change in the view finder but it needs more. I have this lens mounted on my D80. When I push the shutter


A very thin circuit made of ribbon is inside this lens. Infact they are in all electronic lenses. If a short becomes of the ribbon it starts with symptoms such as yours here. However eventually it will quit altogether not working at all ... Digital Cameras

My digital camera say lens error:21 how do i repiar the lens? sanyo vpc-e760 My SANYO VPC-S650 says lens error:507 everytime I turn the camera on. The lens has not returned back to normal position, and everytime I turn the camera it cuts back off. I hav tried replacing the batteries so the batteries are not dead


The lens has a servo fault. This can be either the lens motor, the helicoil in the lens is jamming, or the servo drive electronics has a fault. \015\012\015\012You will have to send the camera for service if you want to fix this. I doubt ... Sony Cyber-shot DSC-W55 Digital Camera

Won't Focus I have had my Canon Powershot SD1000 for about 9 months now. I have had problems with the lens error and it getting stuck but have always been able to get it to work eventually. I had another bout with the lens getting stuck, was able to get it unstuck but now it won't focus at all. Normally I press the shutter down half way to get it to focus on my subject, but now it simply won't focus. I'm wondering if maybe my settings are off, or if it's an internal problem. Any suggestions


You still have a bad lens the internal focus gear is out of alignment. or is offset. a repaired or new lens is required. Sorry :( ... Canon PowerShot SD1000 Digital Camera

I have a D90 and I just got, used, a 50 mm f/1.4 D lens. The lens motor sounds like it is working, but only moves the lens a small amount. Not enough to properly auto focus. It will manually focus, but the movement is not as free as another 50 mm lens I compared it to. Yes, I could bring it back, but if there is a simple fix, I'd like to do that.


Unless you have a lens collimator and other equipment, do not try to take the lens apart yourself. Take the lens in to a reputable camera shop and have their repair department do a CLA (clean-lube-adjust) on the lens. ... Nikon D80 Digital Camera with 18-135mm Lens

Turn on, tries to focus, turns off "lens error"


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon Coolpix S210 Digital Camera

My olypus fe-360 cam's lens wont retract or extend unless the battery is taken out. When the power button is pushed the camera's lens comes out as it should normally, but the screen is blank and it beeps If I take out the battery and put it back in the lens does retract back into the camera. I have not dropped this camera nor have I gotten it wet... what do you think the problem is?


... Olympus FE-360 Digital Camera

Hi there. I suddenly have a problem focusing my canon digital rebel xt. I have done nothing different to it, but cannot get it to focus AT ALL now. I am a professional photographer so tried other troubleshooting routes that I thought might cause focus problems (i.e. not enough light; played around with the shutter speed, f stops. etc.). I also took battery out, and put back. I took lens off and put back on. Any other ideas that you can suggest that would be causing this problem? Thank you for yo


Have you tried cleaning the contacts on the camera body and lens where they meet with a cotton swab lightly dampened with rubbing alcohol? ... Canon Rebel XT / EOS 350D Digital Camera

Lens is open and won't retreat back inside. I turn the power on and makes a funny clicking noise like its trying to retract the lens back in. After three seconds of this it says "lens error, restart camera". Its a canon powershot SD790 IS digital elph with image stabilizer. Canon PC1261...don't know if that helps.


I've had similar problems with various versions of this camera. Here's the fix, if all else fails. These are step-by-step instructions to take apart and fix the camera's lens error. http://johnsmouth.wordpress.com/2010/12/01/lens-error/ ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

Sometimes the autofocus doesn't work. It is switched to af. When I turn the camera on it will normally focus but after 1 or a couple of pictures it will not autofocus. If I move the switch to Manual I can take the picture and then if I move the switch back to m/a it will focus and keep focusing and I can take a few few more frames then then the auto cocus stops working again and I have to switch back to M and so on. I never know when it wount work. Thank you.


Having received no response in over a month, I assume this is no longer a problem. ... Nikon D70s Digital Camera

I have owned a Canon G9 for a couple years. I dropped it back in May. Lens wouldn't retract. Did research - must get it fixed professionally. Instead of sending to CANON - I sent to Teleplan Digital Camera Repair (worthless hucksters) to save some money. STUPID! Horrible experience - just now received my camera back after them having it back and forth since June. After the fixed the initial problem I noticed having some focusing problems. Almost every picture wasn't focusing correctly. Not a


Just to rule out any owner error, put the camera on a tripod or firm surface and take a few test shots to check the focus. If the problem still exists, then you have a decision to make...deal with the same guys or send the camera to Canon and have it ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1894 seconds