Having problems with your Digital Cameras ?

I have a Canon S400 digital elf. Suddenly, the lens doesn' open....after recharging battery. I get a beep followed by buzzing....and the screen says 'E18'? Can you help. Thank you Mickey Chasse


Answers :

This is a very common problem with several digital cameras the buzz sound it the motor being obstructed. and it is giving you a lens error some times you can tape the camera on its side gently while turning it on and free the jam some times not. if not you need the camera serviced. I repair these all the time because of this problem. Cost for repair are normally 65.00 plus 10.00 labor and 8.00 for shipping the camera back let me know if I can help you any further on this issue.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Canon S400 digital elf. Suddenly, the lens doesn' open....after recharging battery. I get a beep followed by buzzing....and the screen says 'E18'? Can you help. Thank you Mickey Chasse


This is a very common problem with several digital cameras the buzz sound it the motor being obstructed. and it is giving you a lens error some times you can tape the camera on its side gently while turning it on and free the jam some times not. if n ... Digital Cameras

Casio ex720 The screen would trun on followed by a constant beeping. Then the screen would shut down. If you tried to turn it on again it would say " power retry is on " or " lens error. "


See Lens Error Fixya ... Casio Exilim EX-P700 Digital Camera

I have a canon ixus 900Ti. I turned it on yesterday and the lens came out as normal. when i went to take a pic the camera shut off but the lense never retracted. when i turned the camera back on the splash screen came on, followed by a series of beeps and then and error message saying "lens error, restart camera". restarting has not solved the problem. its like the lens is stuck out. hope you can help Regards Liam


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Digital Cameras

When I turn my camera on, the screen remains black and says turn power off and on. Upon doing so, when i turn it on again, it begins beeping and says turn power off and on. But if I go to the view pictures screen and back to the "take" picture screen the screen just stays black and says turn power off and on


Hi, \012 \012 Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolv ... Sony Cyber-shot DSC-M2 Digital Camera

Locked Card Does anyone know how to unlock a memory card on the Optio W20? I follow the instructions (press 4-way controller down in play mode, select protect, hit ok) but then I don't get the same screen as what the instructions say will appear. I'm supposed to see a screen than gives me the option of protecting one image or all images, then there should be one that says protect or unprotect. Whenever I try to do this, I can only select protect, but my camera then says the card is locked - it


Try turning it off and doing it then if not then try to protect them ant take it out ... Canon PowerShot S51S Digital Camera

Locked Card Does anyone know how to unlock a memory card on the Optio W20? I follow the instructions (press 4-way controller down in play mode, select protect, hit ok) but then I don't get the same screen as what the instructions say will appear. I'm supposed to see a screen than gives me the option of protecting one image or all images, then there should be one that says protect or unprotect. Whenever I try to do this, I can only select protect, but my camera then says the card is locked - it


Take the memory card out of the camera. Look at it carefully and you will seea small tab. Move the tab from the locked position to the unlocked position. Re-install the memory card into the camera and then you're done.\015\012EEee ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

My Friend dropped my DSC-W30 camerashot on brick floor (it was nocked off a not very high table) and now when I try to turn it on.. the lense just comes out then half way in then out.. (it looks liek a confused robot) like no joke. and all the screen says while it is doing this is " Access " and after a min or two.. it makes this beeping sound and the screen says " Turn the power off, and on again " ? i tryed it.. it continues the same rutine. Please help? my father gave this to me as a gift for


Unfortunately the camera is non repairable short of dropping it again in hopes it jars the auto focus alignment back into position. this is a one in a million shot , but what have you got to lose. ... Sony Cyber-Shot DSC-S90 Digital Camera

My Friend dropped my DSC-W30 camerashot on brick floor (it was nocked off a not very high table) and now when I try to turn it on.. the lense just comes out then half way in then out.. (it looks liek a confused robot) like no joke. and all the screen says while it is doing this is '' Access '' and after a min or two.. it makes this beeping sound and the screen says '' Turn the power off, and on again '' ? i tryed it.. it continues the same rutine. Please help? my father gave this to me as a gift


Try Power Resetting the Camera.First, please turn OFF the Camera.Then, remove the battery pack from the Camera.Then, press and hold the POWER button on the Camera for 30 seconds.Then, reinsert the battery pack and check whethe ... Digital Cameras

The camera was taking pictures a few days ago. The yesterday I went to take a picture and a blank screen came up but when I hit the shutter button in the view finder it would say "busy" and it would make a shutter noise the beep and not take a picture. Now it won't do anything. no screen picture. no beep. no shutter. no "busy". dead as a door nail.


Hi there, the lens detector in your camera circuit board is damaged or short. That's why its fully dead now. Try these for a luck. Remove the lens & power on the camera. Is any movement? if not then I suggest you please visit nearest Canon servic ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I have a new memory card for my kodak easyshare cx6330 camera.when I turn the camera on the message on the screen says memory card requires formatting. when I attempt to format it it says formatting for several seconds and then goes back to screen to continue or cancel. I cannot find my manuel to follow the directions. Can you please help me?


The CX6330 works with MMC and SD cards. If your new memory card is larger than 2GB then it's actually an SDHC card and will not work in the CX6330.You can view/download the manual at the manufacturer's web site athttp://support.en.k ... Kodak Digital Cameras

My polaroid i1237 camera shuts off immediately when I power it on. It says the usual "Polaroid" on the screen and then sound 4 beeps and says "Goodbye" on the screen and shut itself off. I've taken out the batteries and replaced them, and the same with the SD card. Any clue if this is fixable?


I had the same problem with my camera it came on, it clicked, it said goodbye and that was it. what i did and it has worked since is apply gentle pressure to the lens and it's parameters. it took a few times of doing this between attempts at gettin ... Polaroid i1237 Digital Camera

Lens problems I am deployed and I sent my camera to my wife and she has managed to brake it, I was hoping to get some help on this problem: When off, the camera lens is in the position as if it were being used. When turning the Canon Camera Powershot A530 on, the Canon logo screen comes on as it should. Following the blue logo screen is 2-3 rapid beeps made by the camera and a black screen is shown with the words, "Lens error, restart camera". Immediately after showing this screen for five


Try opening your camera, check the lens gear if its teeth are\015\012complete. If so, check if something stucks on it. Its much better to\015\012bring your camera to an authorized service center to re timing your\015\012lens track... ^_^ ... Canon PowerShot A530 Digital Camera

Hi my camera as the lens stuck it makes an error sound of 2 beeps followed by 3 beeps if i press and hold the on button and then press the on button it makes the first 2 beeps lights the lcd screen where you ca read ver. 1.02 and switches of with the 3 beep error and switches back off. any idea??? thanks in advance


Try the procedures in this tip. ... Casio Exilim EX-Z30 Digital Camera

Black Screen The camera was never dropped. And, it worked perfectly just 1/2 hour before the problem occurred. Turn it on, Canon logo shows up, then black screen with 2 beeping noises, the screen says E18 and the camera shuts off by itself. Please let me know what the problem is. I am very frustrated about this!!! Many thanks.


Cannon will repair it free of charge,its a problem with ixus 400. ... Canon PowerShot S400 / IXUS 400 Digital Camera

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

When I turn on the camera is says there is a "lens error, restart camera" and when it is attempting to start it beeps a few times and a blue screen pops up and it says Canon just before the error pops up.


HelloThank you for using FixYa for your problemAlways check the batteries first but if is it still giving the same fault, your camera is faulty. It should be taken to an authorized repair centre for a repair ... Canon PowerShot A560 Digital Camera

When I turn the camera on it has a playback but you cannot view moving images, the color is black on the screen and the camera says, turn the power off and on again, when I follows what the camera says, it still the same. How can I fix it?


I already solved the problem by searching at the internet, in this link http://www.digitalcamera-hq.com/digital-cameras/sony-cybershot-dscp200_question.html?qid=3653 by tapping my camera I solved the problem. ... Sony Cyber-shot DSC-W80 Digital Camera

Focus Error When i turn on my camera, it makes a loud beeping noise, and the screen is black. When it finally shows the regular screen, when i take a picture it says I have a focus error. Is this fixable?


It's a message given when the internal lenses get jammed, possibly due to debris within the gears that move the focus. The "Focus Error" message can involve many FujiFilm models. ... Fuji FinePix Z100fd Digital Camera

Every time I try to turn the camera on it beeps and the screen says access... then says turn the power off then on again. Why?


Hi, This problem is related to optical zoom motor,The part detail is given below:Part No. DescriptionA-1231-924-A LSV-1160AReplace the said part number and your camera ... Sony Cyber-shot DSC-W80 Digital Camera

Zoom error When i turn the camera on, the shutter opens, then closes, then it beeps and says zoom error on the screen. I am able to shut it off, take pictures off it that are on it, get to the menu screen, and pretty much everything that isn't taking pictures. le focus ouvre plus et ou ne ferme plus focus erreur


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by ... Fuji FinePix A500 Digital Camera

Canon SD400 I dropped my SD400 and it will turn on, but the shutter will not retract. However, the screen comes on in color and then goes black and says no image. I can access the menu screen while on the picture taking mode. If I move to anything else the camera beeps three times and turns off. What should I do? Can it be fixed? Should I take it somewhere to get it fixed... and where can I take it?


Its very eas to fix this one.. \015\012\015\012just use a small screw driver and open it up.. \015\012\015\012its possible that the gears were just misaligned. \015\012\015\012got mine fixed..  ... Canon PowerShot SD400 / IXUS 50 Digital Camera

Zoom error When i turn the camera on, the shutter opens, then closes, then it beeps and says zoom error on the screen. I am able to shut it off, take pictures off it that are on it, get to the menu screen, and pretty much everything that isn't taking pictures.


If you are still under MFG warranty and bought it from Best Buy they will ship it to service most likely, If you have their service plan they will be able to ship it for service... this needs to be serviced by a professional repair place... ... Fuji FinePix A500 Digital Camera

Upon power up, display screen says 'access', lens goes in and out several times and then the camera beeps and display says 'turn the power off and on again'


Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Sony Cyber-shot DSC-W70 Digital Camera

I have a sony cybershot camera and it has suddenly stopped turneing on. instead it says 'access' followed by 'turn power of and on again.' I did that but it keeps saying the same thing... and beeping at the same time


Turn on \015\012gently take hold of end of lense and pull and twist gently\015\012switch off then on and problem should go away ... Digital Cameras

ACCESS??? When I turn on my camera, I get a blank screen that says "Access". The lens moves in and out several times on its own and then after a moment, tha camera beeps and says to turn off and on again. I've done this...the problem still exists!


1. Please make sure that you're using a fully charged battery.2. Please try Initializing the Camera. To initialize the Camera.First, press the Menu button on the Camera to display the Menu items.Then, select the SETUP option under t ... Sony Cyber-shot DSC-W70 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2561 seconds