Having problems with your Digital Cameras ?

Help:D At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retract


Answers :

At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retract
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retracts and the camera terns off. i tried to connect with computer and scan for virous, but, when i connect the USB and turn on the camera, the lense retract and tourn off the camera indicating system error 0030.


Hi and welcome to FixYa,Initially, a few ideas you may want to consider:\015\012\015\012ensure that both the built-in 13Mb and the SD memory card are formatted through the camera's features/options ... Digital Cameras

At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retracts and the camera terns off. i tried to connect with computer and scan for virous, but, when i connect the USB and turn on the camera, the lense retract and tourn off the camera indicating system error 0030.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... BenQ DC E610 Digital Camera

Help:D At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retract


At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retract ... Digital Cameras

System error 0010 benq dc e610


System error 0010 ... Digital Cameras

My kodak easyshare MD853 digital 8.2 camera has some problems.. When I turn it on it says: lens error message 122,1,0,0 and the zoom will not retract back into the turn off position.. I called Kodak & it's still under warranty however they say if it's something that not under warranty they will charge me anyway... I bought insurance through Target as well & they referred me to kodak. Does anyone have any suggestions on how to fix my camera?


My camera i dropped it and it was off and i waiting a few minutes and then picked it up and tried to turn for a photoshoot and the dum camera wont work now it says a lens error and it wont come up or anything, so i dont know what i should do ... Digital Cameras

System error ya my digital camera coolpix 885 was just working fine,with no problems,then suddenly i tried zoom in and zoom out,took a picture,and the next moment i see all the images taken henceforth are blurred,tried everything clicking pictures with and without flash,zoom in and out and other things,it still does'nt work so i thought i ll switch it off n then restart and hell it gives an error message "system error". so as usual i removed my battery and replaced it back still it shows "syste


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a pro ... Nikon Coolpix 885 Digital Camera

System error ya my digital camera coolpix 885 was just working fine,with no problems,then suddenly i tried zoom in and zoom out,took a picture,and the next moment i see all the images taken henceforth are blurred,tried everything clicking pictures with and without flash,zoom in and out and other things,it still does'nt work so i thought i ll switch it off n then restart and hell it gives an error message "system error". so as usual i removed my battery and replaced it back still it shows "syste


The following blog outlines some repair options for a lens error:\015\012\015\012http://camerarepair.blogspot.com/ ... Nikon Coolpix 3200 Digital Camera

Panasonic lumix dmc-fx37. Two error messages are now appearing. System error zoom system error o.i.s.


Sounds like the focus and (Optical Image Stabilization)drive motors are bound or broken, sadly this normaly means new camera, unless there are no marks on the case and they wouldn't think that it had been dropped or gotten wet, well ya know, they wil ... Panasonic Digital Cameras

Upon trying to turn camera Panasonic DMC-ZS3 on, error message appears: system error (zoom). The lens comes out a bit and then goes back in, shutter closes, then lens comes out a bit again, then goes back in again ... then error message. Can you help? Thanks!


I don't know that I can help you fix it, but I can try.\012Here are my thoughts...\012Check the battery first. If it's like a normal battery, like AA or AAA batteries, replace them and try turning it on.\012\012If it's a flat lithium battery t ... Panasonic Lumix DMC-ZS3 Digital Camera

My Sony Cybershot DSC-S950 10.1MP Digital Camera with 4x Optical Zoom with Steady Shot returns error message "Turn the power on and off again"! on the screen. also, the lens dont retract like it normally does. i turn it off and on bt the error message persists. when i leave it on, it then turns off by itself after about a minute.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Sony Cybershot DSC-S950 Digital Camera

My Nikon Coolpix S203 has a "lens error". Every time I turn on the camera, then lens goes crazy, moving in and out and zooming in and out of focus, all the while making a beeping noise. It then retracts back into the camera and the message "Lens error." appears on the screen. Please, is there anything I can do to fix this? Thank you.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon Coolpix S203 Digital Camera

Hi I have a Panansonic Lumix - DMC-FS25. My camera has now developed a fault with the lens which won't go back in. When I turn it on the lens zooms all the way out and then back in again and a message appears saying - System Error (Zoom). Any help would be greatly appreciated, Many thanks Graham


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FZ20 Digital Camera

When turning off the camera, the lens does not retract. I also get an error message "SYSTEM ERROR (ZOOM)" and another one "PLEASE TURN THE CAMERA OFF AND THEN ON". Once the camera is turned on, I can hear the lens mechanism working, but obviously failing.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic DMC-FX37 Digital Camera

When tuning the camera on it boots up and the lens opens and zooms then closes and retracts then message appears lens error and message stays on


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Nikon Digital Cameras

My camera felt in the sand, so only tiny particles entered to the eye. The zoom does not work when it is on, there is not a clear image. when I turn on the camera. its lens protection does not opens and a message appears saying that there is a system error (zoom) . What can I do to fix it ands not buy another camera.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-FS6 Digital Camera

My new panasonic lumixDMC-ZS8 14.1MP Digital camera gives me system error (zoom) when I turn it on.the lens will not open?


The systems control board has detected a fault wth the lens, over time dirt and grime collect in the len causing havoc, the other concern is the gears have jammed or got damaged, either way it is a major dis-assembly and it will be expensive. ... Panasonic Digital Cameras

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Digital Cameras

System error ( Oeo1)Appear this message - Casio QV-R40 Digital Camera


I had this same problem years ago, couln't fix it in any way. Tried the description on http://www.oborona.net/stuff/qv-r40/eng/index.html (reloading firmware) but even that did't work.\015\012Found my old qv-r40 today, and gave it one more try using ... Casio QV-R40 Digital Camera

I too have the same problem with my DMC-FS15:- When I turn the camera on in either record or review mode, I get a system error: zoom message after a few seconds, and the camera is inoperable. Then when I turn the camera off, the lens does not retract. Is there updated software that can be downloaded and installed via the supplied USB cable, or any other fix? Regards Martin J


Well perhaps it is just the battery I wonder if this problem isn't simple a bad battery try a replacement, as sometimes they just go bad, and this is indeed a symptom of a battery not working properly. If you have an original power supply, then try i ... Panasonic Lumix DMC-FZ28 Digital Camera

The lens is not able to extend to maximum zoom. It always retracts automatically and "lens error" message appears.


Try the procedures in this tip. ... Nikon Coolpix S3000 Digital Camera

When I turn the camera on in either record or review mode I get a system error: zoom message after a few seconds and the camera is inoperable. Then when I turn the camera off the lens does not retract.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by ... Panasonic Lumix DMC-FZ28 Digital Camera

I have a camera Canon A590is, that is not being recognize by the laptop. In the device manager the "Canon Digital Camera" has a yellow marker. After trying to reinstall the driver, a error message "Cannot install this hardware" apperars along with "The Data is invalid" What can I do to fix this problem. Already trie dby reinstalling the camera SW (Zoom browser...) Thank you, Milton


You didn't say what operating system you are using in your PC. If you have Windows XP or later follow these instructions. Since you apparently have the driver and software on a CD, unplug the camera from your PC, remove the camera software from the P ... Canon PowerShot A590 IS Digital Camera

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Try new batteries ... Sony Digital Cameras

1E11 and 1E1A are the error messages that are appearing in the screen of my camera (Olympus cameia c-60 zoom). The lens will not retract into the camera. How can I fix it, please?


... Digital Cameras

Powers off my canon powershot sd600 digital camera keeps powering off after about 30 seconds. I have gotten a new battery and that didn't help. On the left hand side before it shuts down it has the letter and numbers E18 on the bottom. The zoom lens is also sticking out and will not retract. There are no error messages on the camera at all. If anyone has a solution please let me know. Thanks!


E18 is a lens error message, the lens is stuck or bent, and wouldn't come out, that's why camera shuts off after it tries to do so at the start, not much you can do, but replace the whole lens assembly ... Canon PowerShot SD600 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3732 seconds