Having problems with your Digital Cameras ?

I have replaced my XP Computer for a Windows 7 and downloaded the software for my JVC Everio HDD Camcorder GZ-MG36EKM.However a message onscreen says that the camcorder software is incompatible with my new computer when I try to download my videos and I need an upgrade.I have tried to find an upgrade but is confused as to where to look as some sites seem to want to charge for it.Can you help?



Answers :

If your Windows7 work in x64 operating system, of course it would be incompatibility if you use driver for XP in it, since Windows XP use x32 system, that's where the problem come from (I've faced the same problem sooo many times for several software) . You need to check your OS first (push Windows and Pause Break button together to see it) and make sure which one is your OS, 32 or 64 bit OS? If you have 64 bit OS, for any software that you want to download from internet, you must choose that support 64 bit OS. Some of x32 software still installable in Win7 64 bit, but yes, other software need us to spend some bucks to download them.
If you upgrade your Windows7 you may use XP Mode that allow you to install XP driver or software in Win7 based PC, but once again, ITS NOT FREE !!

Hope this help and be kind to rate please.
(^_^)
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have replaced my XP Computer for a Windows 7 and downloaded the software for my JVC Everio HDD Camcorder GZ-MG36EKM.However a message onscreen says that the camcorder software is incompatible with my new computer when I try to download my videos and I need an upgrade.I have tried to find an upgrade but is confused as to where to look as some sites seem to want to charge for it.Can you help?


If your Windows7 work in x64 operating system, of course it would be incompatibility if you use driver for XP in it, since Windows XP use x32 system, that's where the problem come from (I've faced the same problem sooo many times for several software ... Digital Cameras

ACDsee software Hi, Your advice on upgrading Windows doesn't actually help me - i need help installing the camera software! I've just purchased a Pentax Optio S12 as a second camera (my first camera is a Pentax Optio S40). I'm trying to install the ACDsee software that came with the camera. I am familiar with this software as the 1st camera uses it (I already have a version on my computer) When I try to install it, I get an error message saying "Epson Scan cannot be started - do you want to open


Here is the Pentax Optio S12 software:http://www.freedriverload.com/all43095.html ... Aqua Pentax Optio S12 Digital Camera

When I try to download the JAZZ software for my Jazz hdv camcorder it tells me that I have a problem. It states that the "Software Install" EXTERNAL EXCEPTION C0000006. It also states that I must get a compatible driver software for my computer which is a WINDOWS XP. Please help! I just bought the camcorder today. My email is [email protected]


Hi,Just install supplied software and ignore "Windows Logo for Compatibility" warning, select "Install Anyway or some thing like that" to complete the software and drivers installation.It will work.Thanks. ... Digital Cameras

Dear Support Manager, hello fix-ya guys, im having a problem,,i have a Nikon d2x cam and the software for win xp sp2 but i upgraded to windows 7, now im having trouble locating the drivers my Nikon capture software is working but it is not recognizing the cam, if i check my computer the cam showed up there and i can copy the contents but the Nikon software still dose not recognize, also i tried running the software in compatibility mode but still no go,,,HELP PLEASE have an excellent day Fal


Hi\015\012You can get latest drivers from HERE ... Nikon D2X Digital Camera

Dear Support Manager, hello fix-ya guys, im having a problem,,i have a Nikon d2x cam and the software for win xp sp2 but i upgraded to windows 7, now im having trouble locating the drivers my Nikon capture software is working but it is not recognizing the cam, if i check my computer the cam showed up there and i can copy the contents but the Nikon software still dose not recognize, also i tried running the software in compatibility mode but still no go,,,HELP PLEASE have an excellent day Fal


Please get it downloaded at :\012\012www.nikonusa.com/Service.../index.page\012\012 ... Nikon D2X Digital Camera

Software problems my cam works but my software with my computer is tempermental. i need to redownload the disk, but i lost my disk that came with my camera. i tried looking for a site to download the software but had no luck in finding the software for this particular camera. plaese help, thank you.


Here is the link for the driver;\015\012\015\012http://members.driverguide.com/driver/detail.php?driverid=313573\015\012\015\012Hope this works, as while hunting for it i found many reviews talking about driver problems - with luck it has been update ... Philips J44417 Digital Camera

DXG-308 Bought this camera off ebay didnt have software have on idea where to look I and my girlfriend have tried. I have downloaded the drivers. But its still not showing up on my computer when i plug it in. We are tring to use it as a web cam also. Please ant help!!!!!!! Thanks Nick


Could you e-mail me the driver ... DXG Technology DXG-308 Digital Camera

Hello, I am looking for the software product of the HD camcorder of model number MCC228RSBLK. I would like to be able to run it off of my computer. I had the disc when I purchased it but lost it during a move. Can you help me.


Http://www.manualnguide.com/manual-get/24044/\015\012\015\012\015\012\015\012\015\012 ... Memorex Digital Cameras

I have lost my installation disc for this device and have now upgraded my computer. i have been looking on the net all morning to try and find a solution but with no luck. please can you help!!!


... Disney Pix Micro Digital Camera

Hey can u help me i lost my cd to my cam and i need to download the software so i can get my cam working back on my computer can u help me please i looked evrywhere for this ? I'm wanting to download ;pictures from my DS6310 3.0 Oregon Scientific digital camera to my laptop while away from home visiting our new grandchild and, though at one time I installed the software on my hone computer, I can't locate the disk now.


In almost any case, you shouldn't need additional software to copy pictures from your camera. If you're using windows XP or newer, just plug in the USB cable and turn on your camera. A new drive letter should appear under your start menu--> "my co ... Samsung S860 Digital Camera

My 2-year-old Canon A560 suddenly cannot load photos onto my computer. I've tried 3 different USB Cables 2wo different ports and 3 different computers. It won't open up on any of them. I've tried looking in "My Computer" and running the Camera and Scanner wizard. The camera is not detected and I am not even getting an error message. Please Help!!


If that camera uses a memory card, just buy a cheap card reader for about $10 at wallyworld or an electronics store. It is easier and no software or connection problems. ... Canon PowerShot A560 Digital Camera

Hi - First time trying to upload a video from our Panasonic HDC-SD60 camcorder. Video recorded onto a SDHC card. We are in Australia, camcorder purchased on line from USA. Whey trying to upload the movie to our computer using the supplied HD Writer AE 2.0 software we get the error from the wizard: Remove from the import target because it contains videos in a different TV system Then it terminates the wizard.Can you advise? We have Windows Vista OS.thank you


Hi!You should go to the setting menu in HD Writer AE 2.0 and make sure that the TV system selected is the same as recorded whitin the camera. As you bought it i the US, I assume that the default setting in the camera is NTSC...For the fut ... Digital Cameras

I have QuickCam 5.1'. Recently I lost all on my computer and have now put almost everything back. On trying my camera it did not work and it said make certain it is plugged in properly. I did this and the computer said new hard ware found. I tried to put it in again but was advised to contact Logitech to upgrade. Your help please. Also understand I', over eighty and not a buff. Thank in anticipation Eric Sinden


You can get the updated software from the logitech website. but I don't know which one is QuickCam 5.1http://www.logitec ... Digital Cameras

HELP! I cannot view any of my photos on my computer.. i have installed the software and it works ok but its not recognising my camera... also when i try and access the photos through My Computer> Canon Camera..... it says there is nothing to display. Do i need added drivers or updates... PLEASE HELP!


Trying to view pics from Digital Conceipts 5.1 computer doesn't recognize it. ... Canon Digital Cameras

I got a new mac and I tried to download the pictures from my canon SD360 camera, like a used to do in my old computer mac as well, I download the software Kodak EasyShare that I used in my old computer, but at the time I connect it, it says communication error, I don't understand why, and I wish I could get some help, because I need some of the pictures in my camera, please help me as soon as possible!


The old software may not be compatible with the new operating system in your new mac. You could always use a separate card reader to download your pics...works without special software. ... Digital Cameras

Hello, I have recently purchased an Olympus Digital Camera u-5010 and the photos I have taken all seem to be out of focus. Also there was no CD enclosed for the software and my camera refuses to talk to my computer. I went back to Myer where I purchased the camera and they suggested I download driver software. I have tried to do this but just seem to end up with companies wanting to me to pay to update my computer by deleting obsolete drivers. If you could help with these two problems I


Hi Helen, \015\012\015\012I too have recently purchased the same camera and mine isnt 'talking' to my PC either. First I was told that the software was internal and upon taking it back I am now told to download the driver - of which I can ... Olympus FE-280 Digital Camera

I have a Nikon D5000. I want to be able to look at my photos and the settings i used once they are on my computer. Do I need a special software that will do this or is there something i can download onto my computer. While I am learning it would be good to see what my settings were if I want to create the same look again. Thanks for your help Lynette


Depends on softweare what format the images are recorded as. If you are using JPG, then just about any software package can view them (Windows Picture Gallery, GIMP, Photoshop, etc.). If you are shooting RAW format, then you need software that allow ... Nikon D5000 Digital Camera with 18-200mm lens

I have a samsung s760 camera and cant get my pic on to my computer. i have done it before but cant remember how to do it i installed the software last time but cant find the disc will the software still be on the computer if so what am i looking for. the booklet said when i attach the usb cable it should come up but it hasnt please help thanks


... Samsung Digital Cameras

Help me i am havina similar problem with my computer, i had my computer upgraded to windows xp and before i did that i had camio viewer since the up grade no camio viewer. and for a long time i could not upload my pics from my camera then one day it decided that it would work, it did a couple of times but i have not been able to since. maybe i dont have the correct software. i purchased the camera from a pawn shop so i did not get orig software with the camera. do you know how i can get my pictu


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Samsung Digimax A400 Digital Camera

I cannot download my pictures from camera to computer. Each time I have tried to install software, I get a pop-up saying I need to install Microsoft.netframework 2.0. I try this and get a system error: visual Basic vsa.dd ox080131107 each time. How do I resolve this? I am running windows xp. thanks for your help. I have a Canon Digital SLR that I have never had a problem downloading pictures to this computer.


Solve all your problems by getting a card reader. They always work and you don't need any special software. ... Canon PowerShot A1100 IS Digital Camera

Hi, I've been searching for a usb driver or software for my sony DCR-TRV285E camcorder for XP and have tried numerous websites and links but all to no avail. The sony websites are no help and most of the links l have tried have suggested that what l download will fix my problem but unfortunately they haven't. Any help would be much appreciated. Thanks Brad.


Hello!\015\012\015\012I search almost all the resources but sorry to tell you that the only available support download of your DCR-TRV285E is only the user manual. can be found here ... Digital Cameras

I have a jvc gr-d40 digital video camera. I have mislaid my installation software and recently upgraded my computer to windows vista 64 bit O/S. Would your software allow me to find the appropriate drivers to transfer my video tapes to my computer. I hope you can help. Mr S Marshall


This website should be of help: http://driversfinder.net/drivers/gr-d40 ... Digital Cameras

You can use this software I have ever tried for recovering messages for iPhone.This program can help you recover deleted or formatted photos, video, audio files, documents and archives stored in the SD card inside your iphone. It supports with all iphone models and guarantees 100% security.Here is the details for you, take a look if you need, hope I can help you.http://www.manage-iphone.com/ Free try: for mac:http://download-affiliate.wondershare.com/605715/WondershareDr.Fone.dmg for PC: ( ip


... Digital Cameras

Missing software I have misplaced the software for this camera. I have never downloaded it so can I get the software somewhere to be able to use the mp3 part of the camera? I just tried to plug it in the usb and Windows was looking for the software. Please help, this is my daughters first camera/mp3 and would love to get this working for her Thanks in advance


Try this link,everything you need should be here ... DXG Technology DXG-305V Digital Camera

Win32 error The problem is that everytime I try to upload photos onto a computer, or even look at them for that matter, the only option in the card's folder is dcim.exe, and flashy.exe. Why are my only options execution files, and why is my computer (or any computer) not recognizing the photo and video files that are definately on it? any help would be appreciated. Hi there.I have a 256 MB MMC card for my Canon A460.I have taken some 256 photos on the camara.I change the batteries once on the tr


If you are able to see the pictures on the camera you should be able to get them ..... Now if like you say the changing battery's my have some thing to do with the problem (WHY?)... well the camera every time you insert a new memory it will format ... Canon PowerShot A460 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3078 seconds