Having problems with your Digital Cameras ?
My Olympus Myu 760 got stuck on its lens.
Please help me how to fix it.
When I try to turn it on, I can hear the sound like retracting the lens but the lens still doesn't move and on the LCD appear the message like this
5 f 08
what does it mean ? and how to make it normal again.
thank you very much in advance !
This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Hello Expert, My Olympus Myu 760 got stuck on its lens. Please help me how to fix it. When I try to turn it on, I can hear the sound like retracting the lens but the lens still doesn't move and on the LCD appear the message like this D: 5 f 08 5 e02 what does it mean ? and how to make it normal again. thank you very much in advance !
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Digital Cameras
Lens error My Casio ex-z60 camara lens wont fully extend.When power is turned on, a clicking noise is heard. The LCD displays what will be captured, but is is blury. Then the lens closes and a "lens error" message apears on the LCD. Sometimes a message that says "retry power on" appears. Every thing else works fine. I am able to view my pictures .but I can not take any pictures.. Thank you
This is the lens focus gears. They are either knocked out of alignment, or debris has jammed them. The good news is it can be fixed....Casio most likely won't help. Hint...google my user name. ... Casio EXILIM ZOOM EX-Z60 Digital Camera
I have a small Panasonic Lumix DMC-TZ5 camera. After fully charging the battery I am all of then sudden getting this error message :"please turn camera off and then on again." When the camer is OFF the lens is extended and open. When I move the camera to ON the lens moves in to the closed position closes, then reopens, extends, tries to focus, is unable to and the error message appears "Please turn camera off and then on again" This cycle just repeats. The lens is able to extend it is not st
Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... Panasonic Lumix DMC-FZ7 Digital Camera
Lens Stuck My Lens is stuck on my Coolpix S200 and I'm getting the Lens Error message. I tried to push it back in like I read on here and it went partly in and now its completely jammed. I've only had my camera for about 4 months. Please help!! I'm hoping to fix it myself. i dropped my camera and now the lens wont come out. Everytime i turn on the camera it tells me to turn it off then on again. I've done it multiple times and it doesnt work. I tryed to push the lens in and out but it doesnt ma
YOU CANNOT REPAIR THIS SOPHISTICATED CAMERA YOURSELF!!\015\012I guess pushing the lens inside may have made the problem worse.\015\012I follow a rule- if you drop an electronic equipment and a problem occurs- it usually takes a profession ... Sony Cyber-shot DSC-S700 Digital Camera
Dropped my camera accidentally, and it landed on lens when it was extended. The outer lens appeared crooked and wouldn't move - straightened it but tt won't return to wide function, and now i am receiving a lens error, restart camera message - lens appears to be stuck - can it be fixed or do I need to buy a new one
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Canon PowerShot A560 Digital Camera
Hello.. My the autofocus on my xsi is not working.. it sounds like the lens is not catching in a way.. like, the camera is asking it to focus but the lens isn't moving at all... it makes the sound it usually does when focusing but itt sounds maybe like when your tring to statr an car and it doesnt start... it just keeps straining... do you understand what I mean?
Yes sort of, we have several possibilities first is that if the lens is equipped with an auto and manual switch the switch may have been set to manual or it's positioned between manual and auto focus. Failing that I'd suggest you turn off the camera ... Canon EOS Rebel XSi Digital Camera
The gears seem to be frozen. the lens wont move in or out by self and when turned on screen displays turn cam off the back on? If you get the lens out or push it back in, in wont move back into the other position by itself. it doesnt even make any sounds like its trying to move
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FX50 Digital Camera
Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig
That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera
My camera comes on and the LCD display is fine but the camera does not pick up images. The LCD screen is black where an image should appear like something is in front of the lens but nothing is obstructing the lens?
... Sony Cyber-Shot DSC-T1 Digital Camera
The camera will not turn on after being dropped. When I switch it from off to on, the green power LED flashes briefly. The lens does not move or attempt to extend. The LCD backlight does not illuminate. The LCD appears to be slightly damaged: there is some slight non-uniformity visible when I shine a strong light on it. Otherwise the camera shows no sign of damage. Is it possible that the damaged LCD is preventing the camera from turning on? Is there a hard reset procedure I should try? I've t
I have the same problem. Can someone advice ... Panasonic Lumix DMC-ZS3 Digital Camera
My Nikon Coolpix S203 has a "lens error". Every time I turn on the camera, then lens goes crazy, moving in and out and zooming in and out of focus, all the while making a beeping noise. It then retracts back into the camera and the message "Lens error." appears on the screen. Please, is there anything I can do to fix this? Thank you.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon Coolpix S203 Digital Camera
Two things....my approx.18 month old battery died and i bought a replacement yesterday. is this the normal life expectancy? 2nd. Today, with a totally charged battery, I took eight pictures. Later I wanted to review the pics and when I pushed the on/off button, the lens came out but no image appeared. I could not shut off the camera, so had to pop the battery out. I am not sure now if the lens went back in. I pushed the on button again and the lens moved out; the display lit up with the message
To answer your questions, depending on how much use, (meaning how many snap shoots) will dictate whether your camera has reached its life expectancy. The proper procedure for long life with the battery is to have it totally drain out be ... Kodak EasyShare M1033 Digital Camera
My DMC_FX500 When in a record mode after about 10 seconds the LCD comes up withe the message ... "Please Turn Camera Off and then On Again". The lens retracts and then extends again but this message reappears whenever the camera is turned off and then on again. Can still view previous pictures I Can take pictures within that 10 seconds Only. Any ideas what might be causing this message to appear? I Have "dampened" a cotton earbud with Isoproply alcohol and cleaned inside the battery comp
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Panasonic Lumix DMC-FX500 Digital Camera
Lens stuck My Sony Cybershot lens is stuck in the out position. It occured when I went to take a photo, the camera turned on and then the battery went dead; not enough juice to turn it off. It was frozen like that for about a day and a half, I did not have access to an outlet. Once I charged the battery, it not struggles to move but is stuck. The LCD display says, "turn power of and then back on" Is there a trick to un freezing it? I don't want to send it in for repairs, my warrenty is exp
Hello, I have read other forums that suggest that quite literally rapping or swatting the unit on its bottom half can actually solve the problem and get things going again. I am going to try it with mine. I too have a stuck lens. Here is a link that ... Sony Cybershot S650 Digital Camera
When it is turned on a message saying "access" appears then a message saying "turn the power off and on again" . the whole time this is happening the lens moves in and out
Problem in lens unit repair or replace it ... Sony Cyber-shot DSC-W55 Digital Camera
The lens is stuck out and when i try to turn it on it makes like whirring noises and then the message "lens error, restart camera" appears. how can i fix this?
Lens is out of alignment.Not even all camera techs know how to fix those.Need to find good one. ... Canon PowerShot SD850 IS Digital Camera
Lens is jammed on my "Dimage E500" and error message "Lens Error" appear on the LCD when I turn the camera on.
Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Konica Minolta DiMAGE E500 Digital Camera
I bought this camera on ebay for my daughter- it seemed like a good idea at the time. I have the same model (bought new) & have no problems. The ebay camera went through batteries alarmingly fast and when I changed them they were hot. On our 6th day of ownership a message appeared on the screen that said "Lens error, restart camera" We could not restart the camera b/c it wouldn't do anything - it was dead and the lens won't retract. Does this sound fixable? Does anybody know what would cause t
Of course, you now realize buying on Ebay carries some risk...why was the camera for sale in the first place...because it worked so well? Anyway, try these:\012 ... Canon Powershot SX110 IS Digital Camera 9.0MP
Lense Error I have a problem with a message appearing on my camera screen, "Lens error, restart camera". I have restarted the camera many X's. I have replaced the batteries. That is not the problem. What is the problem? I really do like this camera and it is farely new. Downloaded the Advance Guide and that is how I found out what the message means, but what can I do? Why did is happen? I am putting these questions out there for the experts. HELP
Dear Can On:\015\012\015\012Unfortunately only a small percentage of lens errors can be resolved on their own, such as by restarting your camera. If that doesn't work then the camera will have to be sent into the service center for repair ... Canon PowerShot A570 IS Digital Camera
My camera turns on with a tiny sound like it used to when the lens was telescoping out. but it won't go but a slight distance when the message "lens error-restart camera" appears.
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Canon PowerShot A75 Digital Camera
When in a record mode LCD says to "Please Turn Camera Off and then On Again". The lens retracts and then extends again but this message reappears whenever the camera is turned off and then on again. Can still view previous pictures but cannot take pictures. Any ideas what might be causing this message to appear?
You are experiencing a media miscommunication. This due to low or incorrect amount of voltage to the cameras coding circuits.Take a Q-Tip "dampened" with rubbing alcohol and clean inside the battery compartment well. Do the battery contacts and the c ... Panasonic Lumix DMC-FX500 Digital Camera
Dear sir, I am an Indian Air Force officer in possession of Lumix DMC FZ-20 camera for last 4 yrs.and has provided excellent performance till now. A month back, something happened and the lens assembly became free.On switching on the lens would move out but would fall back on its own, and after 3 tries, message to switch off/on again would appear. I gave the camera to Vashist Electronics, New Delhi, authorised service centre, vide job card no. 10GVEO666 dt. 22 Jul 2010, but
Hi,This sounds like the zoom mechanism has broken. These are not made of plastic but rather steel or aluminium.You could send the camera to an international repair centre like the UK for example. Click on the link below for de ... Panasonic Lumix DMC-FZ20 Digital Camera
I have a new (Dec., 2009) D90. This morning I discovered that I had an "Err" message and a "CHA" message. Both were on the LCD panel on the top of the camera. I was not able to turn the camera off, and the only way to turn it off was to take out the battery. Upon reinserting the battery, everything appeared normal, but after taking one shot the problem reappeared. The interesting thing was that I took the camera body to a Nikon certified shop in New York, and they tried it with a different lens,
The Nikon user manual says on Page 256 that the ERR message indicates a camera malfunction and to clear it, you must release the shutter. \012\012 I have found on my D-90 that I can usually release the shutter by turning the camera off and ba ... Nikon D90 Digital Camera with 18-105mm lens
Polaroid t737 camera.what to do when the LCD comes on for a few seconds and then the camera shuts back down. the lens stays closed and doesnt move. Is there anything that can be done?
Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: r ... Polaroid T737 Digital Camera
Canon ixus 09is Turn camera on - yellow light appears - camera makes noises like its ready to go - screen doesnt work and it takes a few goes to turn it off. Even when the lens eventually retracted and stayed shut the yellow light stays on and the camera got very hot
... Canon IXUS 90IS Digital Camera