Having problems with your Digital Cameras ?

Hello, I have a Casio ex277 digital camera. Also have a new battery for it. The problem is that it won't focus clearly and makes a slight noise in the lense shudder when a picture is taken. The photo is not clear in the display also. I have set the camera back to default to no avail. Any suggestions would be greatly appreciated. Thank you, Greg E.


Answers :

Hi,
\015\012
It will be white balance ,set the white balance to auto and when you take a snap try pressing the shutter button half way to let it focus before you shoot. You also make sure the camera is in auto mode . If you still face the problem ,then CCD image sensor is defect . You need to replace it . This can be done by only professional ,better take to service center to get it repaired .

Hope this helps.

\015\012
\015\012Shane
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hello, I have a Casio ex277 digital camera. Also have a new battery for it. The problem is that it won't focus clearly and makes a slight noise in the lense shudder when a picture is taken. The photo is not clear in the display also. I have set the camera back to default to no avail. Any suggestions would be greatly appreciated. Thank you, Greg E.


Hi,\015\012It will be white balance ,set the white balance to auto and when you take a snap try pressing the shutter button half way to let it focus before you shoot. You also make sure the camera is in auto mode . If y ... Digital Cameras

My Canon 5D mkI turns on ok, will focus, displays top and back, but it will not take a shot. I have two batteries, both which I have charged to full and tried (display shows full charge). I have also tried two seperate CF cards. I have tried cleaning all contacts. Still it won't take a photo. The shutter will work when I use the "clean sensor" function though. Also, I have reset all settings on the camera. Anyone know why the camera isn't firing off a shot?


Hicould you tell me the amount of shot number when you put memory card in? If yes, please move to manual position from auto on the side of lens. And try to press release button.there is other one thing you have to chack selftime release working or n ... Canon EOS-5D Digital Camera

Error When taking a photo the shutter does a double take but does not register the photo info. A "err" is then indicated on the display. This is a intermittent fault and continuous efforts allows a normal picture to be taken. If the camera in held upside down it then functions normal. Have tried a reset, newly charged batteries and different lenses but to no avail. This also occurs within all settings


Please call Jazz Products @ 732-572-7050 ... Nikon D70s Digital Camera

Acer how to fix acer iconia a501 tablet camera focus. It can ONLY take close up photos clearly up to about 10cm. Beyond this any all photos taken are extremely blurred as if the camera is out of focus.I tried resetting the camera properties to default factory setting but this did not help.I downloaded another camera app and this too was useless.How can I set it so that all shots are on infinity focus and not just set to macro shots.CheersJoseph


... Digital Cameras

I inserted a 4GB SDHC card, clicked ok when prompted. clicked "yes" when asked to set SD card as default. took the SD card out and put it into my own camera. my camera said there were no images on the SD card. the photo machine at my local Boots store also said there were no images on the SD card.Tried NOT setting the SD card as default and it still didn't save any images. What am I doing wrong??? vtech internal memory works fine. I just want a bigger memory capacity for the camera!!! From Hel


I assume that the camera is not compatible with SDHC cards and will only work with normal SD (upto 2GB) cards. ... Vtech Kidizoom Digital Camera

I was taking photos over the weekend with my Olympus E-500 and the eyepiece viewfinder got darker than usual. I was using a promaster 5750DX flash. Even without the flash, the eyepiece viewfinder has remained dark. Also, I reset all settings to the default settings and now when the built in flash pops up, there are a series of three "beeps" and the camera tries to focus. I cannot get it to take a photo however. I also pushed the button for the sensor cleaning today. Could this have screwed u


Hi,\015\012Before doing sensor cleaning did you keep camera on bulb setting. This allows the cameras mirror to stay up until you choose to close it\015\012When you press the shutter release button it will lock the mirror up out of the way ... Digital Cameras

With camera on the AUTO setting, I can't seem to take clear, focused photos. Nearly all of them are out of focus or blurry. Does not matter if it is in the day time or at night. Also, when using the ZOOM function the photos are mostly out of focus. What can I try to take clear photos again? Thank you.


Try resetting your camera back to factory defaults. Press the MENU button, select the middle tools tab and scroll down to RESET ALL. Press SET, select OK and press SET. Hope this helps. ... Canon PowerShot S5 IS Digital Camera

Striped photos I just bought this camera, an upgrade from the dmc-lz2 which i thought was fab but whenever i take a photo on it the picture is covered in horizontal lines, it shows both on the camera display screen and on the actual photo when i put it onto the laptop. it even hapens with the factory settings! the screen is clear when i look at it but as soon as the pic is taken it's covered in lines.


Return the camera to vendor it is a faulty product.\015\012Contact Panasonic support to establish the nature of th problem- but as a new item it is the vendors problem ... Panasonic Lumix DMC-LZ7 Digital Camera

Camera has new compact flash card, new batteries,settings reset to default. Camera acts normal however no picture is recorded nor is there a display of photos. Camera set to automatic. Need suggestions as to what I am doing wrong.


Hi,\015\012\015\012I want to know, how do you say that your camera doesnt records photos..\015\012\015\012Because automatic mode you refer is camera mode, You have to change the mode to VIEW mode for viewing the photos recorde ... Canon PowerShot A70 Digital Camera

When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.


Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera

Message Display I have a 256MB memory card for my camera. I have not taken many photos. Even at the lowest picture quality setting of 640, the camera reads that I only have 146 images to take. When I try to review what is in the camera, I receive the message "No Valid Image to Play." The instruction manual explains that the message means. However, I was not able to find anything that tells what to do to increase the number of available photos from 146 to more. This problem happened once


You should have the full instruction manual!! ... Panasonic Lumix DMC-FZ10 Digital Camera

Focus problems Hi, my camera is not focusing clearly. We just used it recently and can look at clear pictures on the display screen but now when we go to actually take a picture it's blury (on the display screen and if a picture is taken). I also notice that all these different setting menu's come up on the display screen when we are in take picture mode. I took it in today and they said the lens could have been bumped or that their is something wrong with the focusing inside. So they would hav


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot SD100 / IXUS II Digital Camera

I downloaded all the photos off the camera directly from the XD picture card H1GB on to my laptop and then formatted the picture card to delete all the pictures and videos so that we could start fresh with a clear picture card. After putting the card back into the camera (fujifilm finepix f470) it shows an error message: CARD ERROR - and it will not take photos. I have checked that the card is in correctly around the right way ect and everything is correct, I also scanned the card on the lapto


What happened there was that the card could be reformatted in different file system. Most digital cameras has an option to format a card, leave the card inside the camera and check if you could reformat the card using the camera so that the card will ... Fuji FinePix F470 Digital Camera

Camera won't show the image on the screen when taking the pictures. I have to use the small view finder to take photos. No image on the display until the photo is taken. How do you sqitch it back to the display set up ?


You don't. The D40 works as SLRs have worked for half a century. Only more recent dSLRs (Nikon started with the D3 and D300) have the LiveView capability that lets you handle your dSLR as a point&shoot. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

My camera deletes the photos taken everytime I turn the camera off. I have all the settings set back to the factory defaults, but it still deletes them. Help


Are you sure they're deleted? Have you tried downloading them using a separate card reader to your computer? ... General Electric A835 Digital Camera

When I try to use a new card, 4mp or 8 mp, the camera display states "memory card error". My brother tried the cards in his camera and the cards DO work. Also, after downloading pictures to save on my PC, I put the card back into the camera but when I want to view the photo's some of them state "not compatible" so in essence I've lost the picture.


Your camera probably can't cope with SDHC cards, only the lower capacity ones. These tend to be 1GB or below. ... Canon PowerShot SD550 / IXUS 750 Digital Camera

I have a fully charged battery and I turn the camera on and all of a sudden I cannot get a display on the screen. It gets a few purple waves, but goes back to a black screen. I have it in camera mode and the original settings i had the camera in when i took pictures, which came out very nice. I saved all my photo's to my computer to see if maybe i filled the memory stick, but still no luck... -Sandy


The display is probably bad - it can be replaced. Try taking a picture and download the results on a computer - if it's ok, then that confirms a bad display. The camera is still usable but with a bad display viewer. ... Sony Cyber-Shot DSC-T1 Digital Camera

Lcd panel I've just bought a new canon eos 350d and the lcd panel will not show the image of what I am taking a picture of. I can take a picture, and display it back on the lcd panel but just not display what is in the viewfinder when I want to take a photo. Have I got a setting wrong somewhere or is the camera faulty? thank you!


SLR's don't show what your seeing through the view finder on the LCD. That is a function on point and shoot cameras, not on SLR's. ... Canon EOS 30D Body Only Digital Camera

Date/Time stamp shows on pics fine but when I connect to pc with usb they all default to 1/1/2000. When I connect the usb cable into my camera the screen display reads "setup date/time usb connected" but at this point the setup buttons are frozen in both set up mode and playback mode. I want the pictures to transfer to the pc with the valid date that they were transferred on. Each time that I clear the internal memory or the memory card the camera starts naming the new pics with the same name as


... Moultrie GameSpy 4.0 Digital Camera Deluxe

Re: POWERSHOT A75 BOUGHT CAMERA IN 2004 BUT RECENTLY HAVE LOST USE OF LCD AFTER START UP AND PRIOR TO SHOOTING PHOTO. HAVE TRIED TO RESET SETTINGS TO DEFAULT BUT LCD SCREEN JUST FLASHES (PIXILATING ?) CAN'T SEE BUSY AND FIELD FILLING UP. WHEN USING PLAY MODE I CAN VIEW BACK MY TAKEN PHOTOS, CAN YOU SHED ANY LIGHT ON THIS PROBLEM.


As aseletroniqu stated, this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camer ... Canon PowerShot A75 Digital Camera

I have an Olympus E300 and I don't know what I did but when I turn on to take photos now the display shows "0" photos available to shoot even though I've essentially cleared all images off; and when I press the button to shoot it will not snap. I have tried the factory reset ( P setting, w/ open FC door holding playback and ok etc etc ..) and this has not helped. Help! Thanks....Sandra


Hi Sandra,\015\012\015\012I would suggest that you format the card in the camera.\015\012You will need to insert the card in the camera and then go into the camera's menu system and choose format.\015\012\015\012In case ... Olympus EVOLT E-300 Digital Camera

I have a canon digital ixus 55 however on auto mode the shots are coming out blury even with flash and i can only seem to get a clear photo on digital mode however this does not allow me to use flash so when i want to take photos in darker lights it proves a problem!! help if u can! also a few times the camera would shut down only displaying a small number in the corner of the screen E18 but i don't no what this means.


The E18 error happens on Canon cameras usually when the lens is jammed when extending. The error is so (in)famous that it has it own website where you can find help and advice on how to fix it. You can view the site by clicking the link underli ... Digital Cameras

Hi, brand new camera, the display screen and photos taken are coming out pink with streaks through them, can i fix this? also how do you return the camera to factory settings?


Sounds like you got a defective camera....take it back. ... Panasonic LUMIX DMCTS2 / DMCFT2 Digital Camera

External Flash I set my Epson 3100z camera to manual mode and set up the camera for external flash. I manually set the shutter speed to 1/60 sec and the aperture to F4. I also set my SunPak flash to F4. My exposures seem pretty good. However when I review the various photo info's, the aperture reading is F5 or F4.8 not the F4 I set. Why is this? Anyone experienced this? The shutter speed are also not always what I set on the camera.


Be carefore that the stopping-down of aperture due to zooming to tele-photo. Flash compensation may be needed. \015\012 ... Epson PhotoPC 3100Z Digital Camera

Every time I turn on my Canon A540 Powershot I get the black date/time screen. The date/time is all zero (the photo properties default to 1 Jan 1980) and I have to either enter the date/time or press Func/Set to clear the screen. Whichever option I take.. the same thing happens every time. Is there a way to make the date/time "stick"? I first noticed the problem when one set of batteries was low.. but new batteries didn't solve it. Any ideas? Camera doesn't have a lot of miles..


Inside the battery compartment, right beside the AA batteries, there's a tiny little door labeled CR1220 (see this picture). ... Canon PowerShot A540 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6644 seconds