Having problems with your Digital Cameras ?

When switching on my Canon 5D2 the screen comes up with error 20 and nothing works. If I switch off and back on again it works as normal


Answers :

One solution that has worked for other users is to format the CF card using the computer first, and then format it in the camera. Sometimes this is a problem if the card had been used with previous Canon cameras, such as the original 5D or a 30D.\015\012
\015\012I hope this helps!
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When switching on my Canon 5D2 the screen comes up with error 20 and nothing works. If I switch off and back on again it works as normal


One solution that has worked for other users is to format the CF card using the computer first, and then format it in the camera. Sometimes this is a problem if the card had been used with previous Canon cameras, such as the original 5D or a 30D.\015 ... Digital Cameras

I connect my canon ixcus95 IS to my computer, switch it on and select Transfer. Fault screen pops up with "SAVER FOLDER NOT FOUND" It's worked perfectly up to now and I have tried uninstalling and re-installed but no-go so far. I've checked back into my rubbish bin to see if I have inadvertently deleted something but nothing there. Help please. Les


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

Memory Card Locked The card works fine in my other Canon Camera, but not in my A620. I've switched out the cards and nothing works in my A620, but they all work in my other Canon. Memory Card Locked is all I get in the 620 and nothing works on camera. Lens comes out and the LCD screen lights up, but that is it. Any help would be appreciated. Jeff


I'm assuming the slide switch on the side of the card is in the correct position. In order for a card to work in a particular camera, it must first be formatted in that camera. This completely erases it so download any pictures still on it to your co ... Digital Cameras

I swapped memory cards with my daughter as mine had a bigger memory. However it didn't seem to work properly in her camera. Her camera now freezes on the opening screen when its switched on and does nothing else, the lens also refuses to go back in. I put the card back in my camera and now mine just switches off when you turn it on after making 3 blip noises! Now both cameras don't work with or without the memory card. I've checked the manual for mine which has no explainations. Also checked bat


The first mistake happened when your card was tried in your daughter's camera. She should have immediately formatted it first since the card was optimized for your camera's operating system. Since she didn't do that and tried to use it in her camera, ... Agfa DC-1030S Digital Camera

My Canon PowerShot A85 hasn't been used much. Every now and then - when I switch the camera on - I just just get purplish mess on the screen. It's not the screen itself that doesn't seem to function (the review mode with taken pictures does work). The CCD seems to be malfunctioning. But then, after a while and while, the camera just decides to act normally again. Could it be I need new firmware? If so, how and where can I download that? Thank you for your attention. Frank.


This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot A85 Digital Camera

I have checked the battery and the back up battery are working properly, and have loaded a tape properly, but when I switch on my camcorder ( Canon MV630i ) I get a dark screen with the time and date e.t.c. showing. My camcorder will not play a tape on the L.C.D. screen either.


May be u can try to use a Camcorder Tape Cleaner disk and Chk ... Canon Digital Cameras

My Canon Power Shot A75 will not take a picture, nothing is visible on screen and nothing comes out if I try to take a picture. Play back works.


Check that the lens cover is removed before taking pictures. ... Canon PowerShot A75 Digital Camera

I have a CANON IXUS iZOOM digital camera that no longer works. the lens does not go back into the camera when it is switched off and the screen was blurry but now no longer switches on at all. a tiny green light beeps to indicate if the camera is on


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon Digital Cameras

I have a Canon MV600. when switched on to 'camera', all I get is a blank screen. Occasionally it will work normally. I suspect the iris is not opening and the iris motor sounds a bit rough. do you have any idea what the problem is likely to be and how much this repair is likely to cost. Incidentally, I also had this same problem with an older analogue Canon model so it would seem to be a common failing.


The US version of the MV600 is the ZR60. Canon has issued a service notice for this model world wide that seems to address your issue. The US version can be found at this ... Canon Digital Cameras

My Canon Powershot G9 suddenly stopped working yesterday. It's just stuck with the lens extended. I've checked and the battery is OK. Nothing's working..no LCD screen, won't switch on or off etc.


This is a really common problem on the G7 and the G9. They get no power all of a sudden when two screws from inside the camera get loose and cause a short. It's not a cleaning as was suggested, your camera actually needs to be repaired. There's a gre ... Canon PowerShot G9 Digital Camera

Sometimes the autofocus doesn't work. It is switched to af. When I turn the camera on it will normally focus but after 1 or a couple of pictures it will not autofocus. If I move the switch to Manual I can take the picture and then if I move the switch back to m/a it will focus and keep focusing and I can take a few few more frames then then the auto cocus stops working again and I have to switch back to M and so on. I never know when it wount work. Thank you.


Having received no response in over a month, I assume this is no longer a problem. ... Nikon D70s Digital Camera

I have a Canon XM3 camcorder. It has given me many years of good service. Recently it has developed a fault. When I switch it onto Camera mode, and then flip the switch to Standby, the small screen flickers blue for a short time, but it does not show the image from the lens. If I switch off, and sitch to Playback, the small screen works OK and all the Playback works fine. Sometimes when I switch to Camera, and Standby, the small screen flickers blue, and then an image from the lens appears, but


Its the problem of CCD assembly\015\012CCD (image sensor) failures, particularly in conditions of high heat and humidity, led to cameras capturing images with either no picture at all, or with extreme distortion and se ... Digital Cameras

My canon ixus 65 digital camera got damp in a downpour despite being in a pocket of a waterproof and in its case. When i took it out at home and let it dry out it no longer works. The lens cover is half open and after putting the recharged battery back nothing happens when i press the on switch.


First check your guaranty, if it is still valid use guaranty, tell them the camera went fault of its own on a wet day.All you can do is taking apart camera and drying it with the phone. If you see oxide on contacts you can remove it with circui ... Canon Digital Cameras

I dropped my canon rebel xsi from about 7feet, but it still took pictures after i checked it. nothing cracked, not the lense, or the screen. but than about an hour later, when i tried taking pictures it said error 99. i took of the lense and tried cleaning it inside, and when i put it back on it still said error 99. it says shooting is not possible. turn the power switch to off and on again, or reinstall the battery. i did those, but the error 99 keeps poping up. i dont know what to do?


It could be several problems. One is a bad contact between lens and camera body, clean the contacts , check for damage and try another lens if you have one. Try another memory card. Another problem could be with the shutter which would need the camer ... Digital Cameras

My canon TX1 is about two years old. I recently went to use it and its not working properly. I can put it in play back mode manual mode or scn mode. As soon as I turn it to auto which I normally use the screen goes black and the power goes off although the lens does not retract. The battery is fully charged. Any suggestions?


... Canon PowerShot TX1 Digital Camera

Hi there I have not used my Canon IXUS 430 for about 6 months. Switching it on battery was falt so I recharged it. Now im only able to view pics which were taken that time back. Im unable to take pics or even view on the LCD screen what im about to take. If I do squeeze off a pic or 2 and view what ive taken it appears as nothing. I download on my computer and picture is black ?


I am so sorry to hear about your troubles, it sounds like you had a voltage problem inside the camera. There is no easy fix that you can do as a consumer on this device, you will need to call Canon. There is a good chance it is still under warranty ... Canon PowerShot S410 / IXUS 430 Digital Camera

I have had my canon 350d digital SLR for 5 years with no problems. Last week whilst on holiday i took a photo then 2 mins later when i switched the camera on i got no screen or power. I recharged the battery and replaced the small CR2106 battery also but nothing works


The operations of the electronics in your camera runs off an added supply of power from a capacitorCapacitors will lose their reserve power if they go bad. Capacitors hold extra voltage and they will tend to dry & crack when getting older. ... Digital Cameras

Hi I have a Canon PowerShot A460 and normally do notn have any problems at all. For the last few hours I cannot take any photos outside - all I get is a white screen. I can however take photos inside with the Flash. I realise that I have possibly changed some settings by mistake and have tried to set the camera to works settings but nothing has changed - I still cannot take photos. Can someone help me please??


Go into the menu and find "reset"...this will restore the original factory default settings and may solve your problem. ... Canon PowerShot A460 Digital Camera

I have a canon zr850 camcorder that doesn't seem to record or playback from tape...it turns on and seems fine but when I record on a tape it shows it's recording but nothing plays back. I tried using the same tape to playback on another camcorder and nothing shows up as if the Canon didn't record to the tape...I tried the other way around recording from the other cam and tried playing it back it doesn't work on the Canon...so right now it wont play back or record though it seems fine The only


You could have a bad head on the unit, or some other problem, which could involve many possibilities. The unit will have to be troubleshot, and then you will know what it will cost to restore operation. Often, it's just better to get another one ... Digital Cameras

Canon S2is Hello evreone, I have bouth camera and after one year when i swich it on getting black screen but seems that camera is working(play mode is normal) same times when camera becomes "warm" after 20 black shuting it works normally, also when i'm opening chip cover and closing works normally but one or two shuts later black screen cold you help me sameone with this.. Tim


This is a common problem with the Canon camera. Please go to the following links and see what is going on. http://www.digitalcamera-hq.com/digital-cameras/category-question.html?qid=3894 and http://www.usa.canon.com/consumer/controller?act=PgComSmMod ... Canon PowerShot S2 IS Digital Camera

Its my boyfriends camera but he says its not working at this time. Now when I switch it on the screen comes on but then it switches off a few seconds afterwards? The screen works but just brings up the word canon and then switches off when I try take a picture?


This normally means the batteries are all but flat. Try a recharge or a new set of quality AA alkalines before looking for any other solution. High capacity NiMH rechargeables are the best battery, but they won't recharge forever. ... Canon PowerShot A510 Digital Camera

Menu Problem I can take photo's fine, and i get my normal preview on the LCD but when i push the menu button or try play back my images - nothing happens. In fact every button except the wheel/power on off and the "take photo" button is not working??? Nothing i press will work except to take pictures? help! It is brand new, got it two weeks ago and everything was working fine. And nothing happened to it, and i changed nothing.


Did you try calling Canon tech support or returning to retailer if the camera is really not functioning properly this soon after purchase, I'd try returning it once all troubleshooting issues have not resolved the issue.\015\012\015\012Ho ... Canon EOS 400D / Rebel XTi Digital Camera

Brand-new Canon Powershot SX120 IS and have put in the batteries and card included in the pack. All seems to be working normally - EXCEPT the screen is continually dark and not showing anything the camera is pointing at. Only the standard icons appear on the screen. The flash seems to be working correctly. Have checked through the instruction manual and not sure what I have done wrong - I have literally set it all up by the book and previous camera was a Canon, so it is fairly familiar with sett


I am not sure if this advice will work for your model, but it does work for other Canon models.There is a DISP button on the back. When you push it in, it will turn off the LCD display. Hit it again, and it will keep the display off but ... Canon PowerShot S3 IS Digital Camera

This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.


You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera

Blank Screen My Canon PowerShot A75, is not showing images on display screen, neither it is recording pictures. The pictures are Blank when shot and downloaded. However .Now if I switch it on nothing is visible on display screen. I have bought this camera from India and now I am studying in france, it is such an issue to even find a Canon Shop in France...i hav been trying on net for days...please help me with procedure to get it repaired as I heard Canon is doing it FOC. Regards


Yes they'll fix this for free, see:\015\012http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black. ... Canon PowerShot A75 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4033 seconds