Having problems with your Digital Cameras ?

I have a Power Shot A300 and a new laptop which does not recognize the camera. What must I do? [email protected]


Answers :

Hellow edrayetta,


here http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=320&modelid=8775

you can find a download section. Selcet your OS ( XP, vista, millenium or such) and download the driver, once you have downloaded and intalled it, you should be able to plug your camera with your laptop recognizing it.



good luck and thank you for using this service.
Dahaka
Use this link to download the camera software on your computer: once installed your computer will be able to detect it

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=145&modelid=8775#DownloadDetailAct





Good luck..........
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Power Shot A300 and a new laptop which does not recognize the camera. What must I do? [email protected]


Hellow edrayetta,here http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=320&modelid=8775you can find a download section. Selcet your OS ( XP, vista, milleni ... Digital Cameras

I bought the Power Shot A580 Canon camera in Italy. I am actually in Ghana. I tried to download my photos on my Ghanaian laptop and it says it does not recognise the camera. I understand it must be installed first using the CD provided with the camera but I left the box, Cd and whatever else in Italy. Is there any chance to solve the problem without waiting to go back to Italy? tks.


Do what the pros do....use a separate card reader for downloading photos instead of the camera. Then, you don't need the software.\012 ... Canon PowerShot A580 Digital Camera

Power shot SD600 camera indicates memory card is locked, and it is not, how do I get the camera to reset and recognize the card again.


Hi thereTake the card out of the camera, face the card towards you, look for a small white tab on\015\012the left hand side of the card, to unlock it push the tab down, it will\015\012be at the side of the card like this ... Canon PowerShot A550 Digital Camera

Can't get computers to recognize either canon camera. I have the power shot SD1100 IS here with me now. I have tested the cords with other devices.  The camera used to work with this computer.


Perhaps you have out of date drivers. try the canon website or windows website and make sure you are fully updated. ... Canon PowerShot SD1000 Digital Camera

I have a Power Shot S230 but my new system (Vista) does not recognize the driver for the above camera. I do a lot of pic work and need desperately Bill O'Brien [email protected]


In order for Windows XP or Windows Vista to communicate directly with a digital camera, the camera must be PTP (picture transfer protocol) capable. This protocol was developed after the PowerShot S230 came out six years ago. Your best bet would be t ... Canon Digital Cameras

I own a Canon Power Shot S410Digital Elph which was purchased about four years ago. At the time I installed the Digital Cameta Solution disk and the ArcSoft 1.3 in my HP Laptop which said it was for Windows XP. I just bought a Dell Laptop and have Windows Vista Home Premium and would like to download pictures. What must I do to be able to download pictures from the camera?


This version of arc soft seems to be vista compatible. link for the latest version ... Digital Cameras

My Canon Power Shot SD800 IS no longer is recognized by my computer when I link it up to download my photos from my camera to my PC. I have tried reinstalling my software and that did not work. Do you have any ideas as to what may have happened?


I would like to help you troubleshoot your connection issue. I need to know:1. Which Operating System you are running. 2. What other, if any, imaging devices you have connected to your computer such as printers, scanners, webcams. ... Canon Digital Cameras

I just got a Mac Book Pro and tried to up load my pictures from my Cannon Power Shot A710 IS. For some reason it would not recognize the camera. Usually when hook up a usb port or cd. It will pop up on my desk top. Any suggestions? Thanks Jon


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot A710 IS Digital Camera

My camera problem is :when i start or turn on the power button of camera a massage is displayed which is "Turn off the power and on again " i followed the same but again when i am turning the power on again ,same massage is being displayed in camera . camera model is :SONY DSC-W180 cyber shot please help me out soon.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W180 Digital Camera

What do I set my camera on to take great shots of a reunion and what do I set it on so there is not such a time delay between shots...it seems it takes too long for my camera to get ready for the next shot and I am missing out. I have a Canon power shot A720IS


Why it takes long between the shots is because of the size of the file to be saved. So, to take pics faster reduce the size by reducing the resolution. Which you dont want as you want great pics. Choice is yours. ... Digital Cameras

Canon power shot s1 is our camera suddenly ..


It is possible your USB connector has been damaged on the camera. This should be a relatively cheap fix however sometimes the circuit could also be damaged by a spike of power comming from the computer side. If it is found to be the later, you could ... Canon PowerShot S1 IS Digital Camera

My Cannon Power Shot A520 Camera will not power the lens up when I turn it on. I get the message "No Image" on the viewing screen, but nothing else happens. Back Switch is set on camera symbol, but camera acts like it is set on view. I have installed new batteries and battery terminals are clean.


The camera may need a software update which can be done through manufacture for $50 or you can downlaod an update from their website and follow the directionsOr the zoom may be dirty or debris is stuck in the zoom lens and needs to be blow out ... Digital Cameras

I have Canon Power Shot A460 and I am experiencing some problems with my digital camera. Actually the pics shot with the camera are completely white in sunlight and there are stripes and bluriness when pics are shot inside. If the pics are taken in a complete dark room, they are well and good. Please let me know how to solve this


HI there reset the camera setting and make sure the exposer setting is maintain on center/ middle position. After that if you face same problem then you need to visit the camera repair store for repairing the camera CCD unit. Thanks. Waiting for your ... Canon Digital Cameras

Canon S2IS Either screen is dark when I power up the camera. I can see previous images but I cannot record anything. Sometimes I can reboot the camera and it will work for a shot or two, but currently even that does not work. I have changed batteries with no good results. They power up everything but do not affect the recording of pics. Jeff Canon S1IS have problem with dark screen... I have a brand new Canon PowerShot A560 Digital Camera. I put in brand new batteries. On after shooting n


Your camera has the know issue of Stuck shutter, whichhappens after some time (weeks or months) thata camera is notused.\015\012\015\012Unfortunately the repair of it requires a complete disassembly of the camera, including the lens, fix ... Canon PowerShot A560 Digital Camera

Camera FX35 was working fine. In middle of taking pix in Oxford, screen suddenly refused to come back on, although optical viewfinder works and on screen viewing of taken shots works OK. Is there a power-saving feature I accidently turned on? Only have the simplified manual with me and am new to the camera. Tried my spare battery but same results. I can continue to take shots via the viewfinder and shots seem to work, but I really want the screen back -


The [AUTO LCD OFF] of the [ECONOMY] mode is active> Press the shutter button halfway to cancel these modes.Charge the battery or replace it with a battery which has enough capacity. ... Panasonic Lumix DMC-FZ7 Digital Camera

When I push the power button, the lens cap comes out and on the screen is a very brief shot of what the camera is aimed at. The camera stays engaged for one second and the lens cap goes retreats back into the camera and the power goes off and nothing is on the screen. This happens after the battery has been fully charged also.


Try to remove the rechargeable battery and use a battery of the same \012type but an alkaline like the energizer. Sometime rechargeable battery \012malfunctions that it seems fully charged but actually is not. If the \012camera continue to power on w ... Kodak EasyShare M1093 IS Digital Camera

Power Shot G2 camera is at date screen when you turn it on. I changed date battery and it will not let me change the date. Camera has only be used 3 times. The camera powers on and lens moves but it will not leave the date screen nor do any of the buttons work to advance the time and date.


I had a similar problem. I solved it by taking the rear cover off and reseating a ribbon cable that connects the switches to the main circuit board. This connector is hidden under a large plug in connector - also a large copper/plastic ground plane ... Canon PowerShot G2 Digital Camera

Cannon Power Shot SD600: I receive the following message every time when powering up the camera: "Lens error, restart camera". The camera will not reset or proceed beyond this message.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon Digital Cameras

For fully charged NI Mi batteries 2700mA, when I turn on my camera I may or may not get the red low battery sign, I may or may not get over 15 shots, and I end up to the "instruction" that my batteries are low and must change them. Turning on and off the camera, everything is OK, I can take shots, and the problem returns. I have the PowerShot A570 IS Ai AF Cannon digital camera. I have a new charger that when the LED sign is on Green I know that the batteries are full. Is the problem on the cam


How much time between shots is it? ususally there is a 3 minute none use shut down timer or warning light. so if it is more than 3 minutes from the time you take one picture to the next picture then that might be your problem. also these new digital ... Canon PowerShot A570 IS Digital Camera

Kodak Z1015 Brand new Kodak Z1015 camera. I take three shots and a message appears on the screen saying "PROCESSING". At this time the camera is inoperable. 40 seconds later the message goes and I can take another three or four shots, then same all over again. Kodak as much use as an ashtray on a motorbike. They say I must take a download from the Easyshare software, but that won't work. Any suggestions? Cheers, Dave Watts.


Have you tried downloading updated firmware. Also this camera is slow in processing photos(especially if you use the Smart Capture mode. Hope that helps ... Kodak EasyShare Z1015 IS Digital Camera

I do have a canon digital camera model - Power Shot SD 1200 IS DIGITAL ELPH (DIGITAL IXUS 9515).The digital camera solution disk has been misplaced.Therefore download of it's software could not be done on my laptop.With the result,I am unable to transfer shots on my laptop for further use.Is it possible to download the software through internet to ease my difficulty? My e-mail is [email protected] u will help me out, early.-----P.K.Shrivastava,Bhopal,(M.P.).INDIA


You can always use a separate card reader to download your pics to a folder you create on your desktop. ... Digital Cameras

Sony Alpha DSLR-A300 LCD screen does not power up as if there is no power going to the screen. the camera takes fine pictures. to view the pictures, you will have to plug the camera into a computer.


It is for sure that the LCD display is not working. Hence you need to probe into the camera to confirm but attempt only if equipped with the right tools and some experience , becasue as of now your camera can shoot good pictures and you must not end ... Sony Alpha DSLR-A300 Digital Camera

The Sony Cyber-shot acts as if the battery is dead. Purchased new battery this afternoon. The camera worked fine for about a hour. I was turning the power on and then off frequently taking pictures at Bible School. The camera would turn on and then after turning it off would not power back on.


This is a known issue with Cybershot that even when its power OFF it still drains battery life, and Sony is awarer of this problem so better take it to a service center near you and have it check since you already use a new set of battery for this un ... Sony Digital Cameras

Same as one that's been posted... When I change to picture mode on my Sony Cyber-Shot DSC-P73 it automatically powers off. By changing back to view mode it's possible to power on again. Not the batteries. MY REAL camera is a Canon EOS so this is my pocket camera - it's been looked after very carefully.cheers.


RESET your camera. Refer to your camera manual for reset instructions. It may require to push a reset button or check this link (copy and paste in your browser windows IE or Firefox):http://esupport.sony.com/perl/tutorial-display.pl?tut_id=374 ... Sony Cyber-Shot DSC-P73 Digital Camera

We bought a Power Shot D10 Warerproof 10m/33ft. The camera cannot distinguish between dark and bright. the bright parts are too bright and the dark parts are too dark (on the same photo), nothing I can do with +/- correctur. Could you please give advise. We just bought it 2 months ago. I look forward to hearing from you. Olivia The porduct is not on the list: Power Shot D10 Warerproof 10m/33ft


Try this...go into the menu and find "reset"...follow the on-screen instructions. ... Canon PowerShot SD1000 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4016 seconds