Having problems with your Digital Cameras ?

I have a DMC-TZ5. The lens cover mechanism ("barrier") has become "sticky," and now requires an occasional very gentle tap to get open when the camera is turned on. The problem is intermittent and not predictable. The mechanism has NOT been bent or otherwise injured. I have been careful not to damage it. Any suggestions for getting it to work correctly. I've tried flushing out the mechanism with compressed air and that hasn't solved it.



Answers :

Hi,
\015\012
\015\012The internal mechanism is stuck and causing this problem. You can't do anything from your end. You need to take to service center to get it repaired.
\015\012
\015\012Hope this helps.
\015\012
\015\012Shane
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a DMC-TZ5. The lens cover mechanism ("barrier") has become "sticky," and now requires an occasional very gentle tap to get open when the camera is turned on. The problem is intermittent and not predictable. The mechanism has NOT been bent or otherwise injured. I have been careful not to damage it. Any suggestions for getting it to work correctly. I've tried flushing out the mechanism with compressed air and that hasn't solved it.


Hi,\015\012\015\012The internal mechanism is stuck and causing this problem. You can't do anything from your end. You need to take to service center to get it repaired.\015\012\015\012Hope this helps.\015\012\015\ ... Digital Cameras

I have a Canon IXUS 800, the shutter won't open properly, just opens about a millimetre. I don't want to break it as otherwise it is an excellent camera. I think it might have some dust in the shutter mechanism as we are using it to photograph an old farm we are renovating which is often a bit dusty even though we take care to put the camera into its cover after use. Can anyone suggest what is best to do please?


If you truly mean the lens shutter, please see this link.\015\012\015\012However, if you are referring to the automatic len ... Canon Digital Cameras

The camera will not turn on after being dropped. When I switch it from off to on, the green power LED flashes briefly. The lens does not move or attempt to extend. The LCD backlight does not illuminate. The LCD appears to be slightly damaged: there is some slight non-uniformity visible when I shine a strong light on it. Otherwise the camera shows no sign of damage. Is it possible that the damaged LCD is preventing the camera from turning on? Is there a hard reset procedure I should try? I've t


I have the same problem. Can someone advice ... Panasonic Lumix DMC-ZS3 Digital Camera

Camera lens movement mechanism seems to be damaged, as when switched on, the camera lens does not extend out completely and the object appears blurred on the screen. Similarly when switched off, the lens does not retract back completely and it needs a manual push to put it in a little more. But even then it does not go in fully. Rest of the functions are working well. The damage is the result of an accidental body weight going on the camera, when it was in on condition.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Digital Cameras

IS THERE ANYWHERE I CAN GET A FREE MANUEL FOR A SAMSUNG CELL PHONE ALIAS 2 U-750, I DON'T CARE IF ITS SOMEWHAT SOILED, TORN OR OTHERWISE?


Http://www.samsung.com/us/support/downloads/SCH-U750HAAVZWThen Print. ... Samsung Digital Cameras

The zoom lever appears to be broken on my panasonic lumix dmc fz8.....it refuses to zoom in while either capturing or reviewing pictures, the lens mechanism is fine I believe and there is no visible damage to the camera, and I do not recall dropping it ever...


... Panasonic Lumix DMC-FZ8 Digital Camera

Sony HDR-HC3E error code C31 22 and message 'reinsert cassete'. I've reinserted cassette, tried another new cassette, checked for dirt etc. It was working the day before, it will record but on playback the error code and message appear, and tape stops. It will play last 2 seconds of recorded video. I've removed power, battery, pressed reset. No mechanical damage. What is causing it?


... Digital Cameras

I have a miniDV cassette that has a damaged door mechanism and the tape has been snapped. Can this be repaired to enable transfer to a digital medium


Yes the tape can be repaired. The problem is that at the point of the break, there will be some data loss. It should be minimal unless the tape was stretched first. If it is a clean break, the data interruption will be small. The door should be r ... Digital Cameras

Lens error displayed in the left corner of the LCD. The objecting does not retract...no mechanical damage has been applied. Changing the batteries did not help.


HelloUnfortunately\012 a "lens error" message is not something that you will be able to fix. This error indicates a system failure and requires the \012camera to be sent in for servicing and repair.\012 ... Canon PowerShot SX20 IS Digital Camera

I need the glass screen for a Vivitar 8025 touchscreen. The glass was broken (Stress fracture from Granddaughter having it in her pocket when she sat down). I removed the glass carefully, it does not look like anything else was damaged. Is there a way I can order the glass.


Not that i know of you could get a new camera on ebay for a good price you might be able to get the same one that is broken !! have fun Good Luck !! :) ... Vivitar ViviCam 8025 Digital Camera

I have a new Canon SD850IS and only used it for a week. Sometimes it powers on normally, and sometimes it doesn't displaying E10 on screen for a few seconds. Have not dropped or otherwise caused damage. Help!


A new camera should not be doing that. Take it back or return it for an exchange. Make sure you let the retailer know what the issue is so they don't restock that particular camera. ... Canon PowerShot SD850 IS Digital Camera

I have a new D3100. I took pictures, then stuck the memory care in my hpC3150 card reader and the orange exclamation point lit up on the hp. I put the memory card back in the Nikon and it said, Memory card may be damaged, use a different card! What do I do?


I believe that the memory card was not formatted to the camera before using so, the pictures were corrupted and unable to read in either the computer or back in the camera. What you need to do is make sure the memory card is unlocked here is a diagra ... Nikon D3100 Digital Camera

I dropped my camera and now my pictures are too dark. I tried to reset -> no good I changed my lenses and with both lenses I have the problem. I check the driving mechanism for the shutter, seems to function OK is not damaged


... Nikon D40x Digital Camera

Zoom error. Camera has been stored for 6 months in its case in safe and dry conditions. Has not been dropped or otherwise damaged.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Olympus SP-560 UZ Digital Camera

Flash does not work on Kodak z650. no damage history. What can be done?I'm fairly adept at mechanical stuff.


To correct the flash problem, please do the following:Turn off the camera. Install a set of new or fully charged batteries into the camera. Turn on the camera. Press the Flash Status button to scroll through the flash options ... Kodak EasyShare Z650 Digital Camera

I hit the on/off button on my Canon IXY Digital 10 (7.1 m-pixel), and it will not turn on - I get black screen and message:'Lens error, restart camera'. It was working fine before, but has now not worked for over a month. It was not dropped or otherwise obviously damaged. Please help! Tim, Reading


Take out the battery and see if its damaged. if it seems fine put it back in. ... Canon IXY 1000 Digital Camera

Panasonic Lumix DMC-Z20 took a knock, now lens gets stuck during power on, grinding noise and lens chugs back and forth for a few seconds. screen displays message "please turn power off and on again". the servo obviously still has power but it seems some part of the mechanism is struggling. any ideas/instructions on how i can crack the thing open without causing irreparable damage? (and should i try...) cheers, Ben. 0405124646 [email protected]


... Digital Cameras

The lens is stuck in the 'on' position. the mechanism that opens and closes the lens is damaged. how do i fix it? it does not take pictures


To solve that problem first make sure that the battery is fully charged., now if the lens still not moving or retracting and you can just hear a mechanical movement it means that the mechanism or the gear of the lens is defective., You need to call k ... Kodak EasyShare C913 Digital Camera

PLEASE TURN CAMERA OFF AND THEN ON AGAIN message comes up repeatedly. What can I do about this? Someone suggested the zoom lens mechanism might be sticking. Spray with WD40?? Thank you for any help you can give. Camera very good otherwise, but this fault means one has to take a picture in a hurry, with no time to think about it. Clive Sutton


ITS WITH THE LENS AND WILL BE FIXED IN 24 HOURS . AND CAN BE DONE AT MATA ELECTRONICS, SP ROAD, BANGALORE 2. ... Panasonic Lumix DMC-TZ1 Digital Camera

My camera won't turn on, changing the batteries/cleaning the contacts hasn't helped. It was fine last night, and i can't see how it would've been knocked or damaged, i was careful!


Here are the steps for the no power problem: 1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher). 2. Clean the battery contacts. ... Kodak EasyShare C140 Digital Camera

I dropped my nikon coolpix p5100 camera the lense windout mechanism is damaged i sent it to newton ellis for repair but they say that nikon wont sell them a part to repair it. the camera is 10 months old.i was advised to send it to nikon for repair but i dont know where can you please advise?


If you want to repaire the camerra it will be costlier the lens barell assambley has to be changed it will cost you aroound 80 us $ its beter u can sell the camera for prarts \015\012if u want to sell visit us on omaxphoto.com\015\012than ... Nikon Digital Cameras

Sony cybershot S600 sticking lens cover mechanism


... Sony Digital Cameras

Trying to fix a damaged lens unit


Lens parts can be purchased seperatly, so check witch parts need replacing and get a lens assembly diagram. ... Panasonic Lumix DMC-FX9 Digital Camera

LCD damage My camera lcd got damaged in Miami last week.  I am looking for the cause - how did it get damaged?  I want to repair it but don't want to let it happen again. For a picture of what the damage looks similar to see photo under Step 1: http://digitalcamerarepair.googlepages.com/casioex-s600


The picture shown in your provided link says impact damage. It does not take much of a bump to crack an LCD display like that.Fitted cases aren't always the best storage for camera gear. I use a larger bag even for my smaller cameras an ... Casio Exilim EX-S600 Digital Camera

Casio EX-Z50 digital camera - will not 'start' i.e. lens will not extend


If you cannot find a solution to your problem you may want to email [email protected] He has good advice and good used parts at a fair price. ... Casio Exilim EX-Z50 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0424 seconds