Having problems with your Digital Cameras ?

My canon sureshot g10 will not turn on with a good battery. Could it be fuse? How do I replace?



Answers :

Hi\012It could be fuse in some case. Other is main pcb brown. There is fuse in dc/dc convertor circuit which distribute power. The cause due to fall out screws from strap holder inside of camera. You can check it with multimeter. But there is possible risk. If you wish to work. let me know I will let you work.Also, if main is bad then you should send to canon factory. your local repair shop can not provide service due to reprogram by computer.\012Thanks and best regard!
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My canon sureshot g10 will not turn on with a good battery. Could it be fuse? How do I replace?


Hi\012It could be fuse in some case. Other is main pcb brown. There is fuse in dc/dc convertor circuit which distribute power. The cause due to fall out screws from strap holder inside of camera. You can check it with multimeter. But there is possib ... Digital Cameras

Fuse blown on my Canon CB-2LZ battery charger (for the G10 compact camera). What current value replacement do I need?


... Canon Digital Cameras

Canon eos rebel won't turn on, charged the battery, replace and it would turn on but if you turn it off it won't turn back on. Took the battery out and replaced it would turn on until you turn it off again, then it won't turn back on. What do you think?


Went through the same thing. Ended up sending it back to the Canon repair depot. Evidently this is a common and rather annoying problem with the Rebels main board power section It is covered under warranty so it is best to check for coverage and get ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

CANON SX1000IS camera won't turn on, batteries good, problem with date/time coming on (battery good) program date/time will work but must program every time camera is turned on


... Canon Digital Cameras

Daate Stamp We recently lost our Canon A95 camera and replaced it with a Canon A640. We cannot get the "Date Stamp" to work on the menu. We see it listed last on the menu. However the lettering is black (not white like the others) and we cannot get on it to turn "Date Stamp" on. You Camera User Guide is useless. Please advise how to turn the Date Stamp feature on. Franklin L. Finley at [email protected]


Some functions are not available in all modes.\015\012\015\012You have to select Postcard mode to be able to enable the feature (about Page 35). Postcard ratio is 3:2.\015\012If any other ratio is selected (e.g. 3:4) then if it were ... Canon PowerShot A640 Digital Camera

My canon digital rebel (ds6041) wont turn on. I have already replaced the battery 4 times with new ones. All fully loaded. still doesn't turn on. I have taken out the mini battery inside the camera, on the internet it said that the camera then would reset itself, still doesn't turn on. Who has an idea, because I don't want to sent it to a reparation store.


... Canon Rebel XT / EOS 350D Digital Camera

My Canon DSLR 1000D will turn itself off (sleep mode) and then will not turn back on, even if I flick the switch off and back on. I have to remove and replace the battery and then turn it on in order for it to work. It also seems to be draining the battery life


Same to me, i dissembled it clean every circuit, upgrade firmware but problem not solve, i thing there is some defect in the electronics parts ... Canon PowerShot SD750 / IXUS 75 Digital Camera

My Canon A460 says the Card is locked. The lock switch on the card is set to unlock. I have another camera with a similar card. Both cards work in the other camera. neither card will work in the A460 both say Card Locked. It must be something in the camera. I have tried the turn off remove card turn on take picture. No card message. Turn off replace either card and see Card Locked.


Back up your data first,thenyou reformat the memory card in the camera.i guess you have formatted the memory card in another device.canon cameras generally do not accept cards that have been formatted in another device.then sitch off the camera and r ... Canon PowerShot A75 Digital Camera

I have a Canon EOS Rebel Digital and it won't turn on. I've replaced the battery, cleaned the metal parts of the battery ad it won't turn on. When it first stopped turning, when I would click the the


Probable cause is a screw that has come loose and is floating around inside. It probably has blown the P fuse on front board. If you are unlucky, it has shorted out the flash board and taken down multiple boards in the camera. It all depends upon whe ... Digital Cameras

Canon Powerhot SD600 Won't turn on


With the back off ,right under the on/off button you will see a black surface mount fuse labeled 2.3 take a fine wire and jump the two side legs out and it will light up. A safer way is to ohm out the thing for continuity. You always take a chance of ... Canon PowerShot SD600 Digital Camera

Canon G10 wont turn on


Try removing the card first and then trying to power up the camera. Cameras often fail to turn on/off when a card goes faulty. Next I would try pushing the playback button, it also acts as a power button but starts the camera in playback mode. If thi ... Canon PowerShot G10 Digital Camera

How do i replace the lcd window glass on a Canon G10


This may not something you want to do.What is wrong with the LCD?Here is a page at Canon which may be your problem.These cameras, if the problem exists, will be fixed by Canon for free!!http://www.usa.canon.com/consumer/contro ... Canon PowerShot G10 Digital Camera

Canon rebel xs when i turn my camera on and push the shutter button a "busy "signal flashes in the viewfinder. I have replaced batteries, memory cards etc. I cannot access the menu. Is there a fix other than sending it back to canon?


... Canon EOS Rebel XSi Digital Camera

I have a Canon Power Shot SX120 IS camera. I turned it on and the lens open a portion of the way and I got an error message that say, "Lens Error Restart Camera". I put fresh batteries in it this morning and have only taken about 10 pic's. I turned the camera off and removed the batteries then replaced with new ones but I still get same message. Please advise if you can.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SX100 IS Digital Camera

Canon Power Shot A2000 IS lens is stuck in out position. I had to replace batteries. I replaced them and when I turn on, it says "Lens Error, Restart Camera" and it shuts offs automatically.


The lens has probably got something in the retraction mechanism that is stopping it retracting. This can be something as simple as sand or grit or as a result of a drop or knock. In most cases the camera will need to be stripped apart to remove the l ... Canon Powershot A2000 IS Digital Camera

Canon G10, clicking noise when turning camera on & lense extends. Error message when zooming or turning off, these are both intermittent problems


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot G10 Digital Camera

Canon SD890 IS: Upon turning on, msg says "Replace Battery." Replaced w/fully charged battery and it still wont start.


This is either a problem with the batteries or a problem with the camera. Did you replace it with a different battery? If you didn't, then you should buy a new battery for it, because that message means there is probably a problem with the battery it ... Canon Digital Cameras

I turned the camera on and saw a black screen that moved when I did. I replaced the batteries with fresh ones no good I installed the memory full 32mb mem card and it worked, I reinstalled the 512 mb mem card and it worked until I turned it on 1 hour later again black screen that moves with you I changed mem cards still not working


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. Ple ... Canon PowerShot A95 Digital Camera

Batteries everytime I turn on my camera it says replace batteries. I have replaced them several times and know the batteries are good. My camera is only 1 year old. Any suggestions?


I have this camera and mine will not work without duracel batteries. It is crazy but that is the only ones it works with. ... Polaroid i830 Digital Camera

My nikon p60 will not turn on and cannot reset. the lens is in 'on' position, but when i hit off button, lens stays in place. i then take out good batteries and replace the batteries and same problem occurs. in other words, cannot turn cam to on position


... Nikon COOLPIX P60 Digital Camera

Canon sd750 How do I disassemble my canon sd750. It was dropped from about 2 feet and won't turn on now. It must be a fuse or something like that that is broke. Can you offer any suggestions?


Send it to us for a free diagnosis this power issue is very common. we can fix for for normally 85.00 worst case 125.00 depending on the issue 85.00 replaces the fuse or mainboard. ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Fuse replacement on the canon xti - Canon Rebel XT / EOS 350D Digital Camera


... Canon Rebel XT / EOS 350D Digital Camera

I PURCHASED A KODAK DIGITAL z1085lS I took 6 shots in 24 hrs and battery was dead. The batterys are to expensive to be replacing so often,so I purchased good quality rechargable batteries but after 4 or five shots their dead also. Is therer an electrical problem with these camers or is this normal. Some times I can hear a motor turning in the camera long after it has been turned of. Hope you can help thanks chris


This is not normal. Good batteries should give you over 100 pics before things start to slow down. If you bought the camera new you need to contact the warranty/repair folks at www.kodak.com and have them either repair or replace the camera. If yo ... Kodak EasyShare One Digital Camera

CAnon Powershot SX 100 IS will not turn on after replacing batteries. Tried lots of batteries so it's not that. I did notice the past few months the red flashing icon that indicates low battery kept coming on even shortly after replacing batteries.


The power supply has given out inside, specially when you said after putting new batteries in it says there low. A camera shop would be the best bet for your repair around $45 bucks would fix this. You can try cleaning out the battery area with ... Canon PowerShot SX100 IS Digital Camera

Hi there, I have a Canon IXUS 90 IS - the lens is extended out and won't retract when pressing the 'on' button. The camera only makes a 'turning sound ' from the motor ( I asume the motor), but the actual display in the back reads' Lens error, restart camera' The nearest camera specialist for Canon are a good 600 and 1400 km's away respectively ( I live in Durban, South Africa)so would like to rather try fix this myself before paying, most likely a similar amount to buy a new camera. Any suggest


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2802 seconds