Having problems with your Digital Cameras ?

My E15 works Ok with my SanDisk 2 GB SD card and with my SanDisk 4 GB SDHC card. It also works without a card. When I insert another card and press the power button, it turns on, but all buttons are locked. The only way I can shut it off is to remove the battery. Cards that do not work: SanDisk 8GB SDHC, SanDisk 8 GB SDHC Utra, 4 GB PNY SDHC.


Answers :

Whatever is going on here is going to end up being at the card detection level, which means to repair it, the main control board would have to be changed out, and that would be an expensive fix. I couldn't find a model E15 on the net, and am uncertain what kind of camera this is, but they're all basically the same in construction, with the memory card holder soldered to the main board. You might be able to find an "as-is" camera on ebay with a broken lcd display, and swap out the main board to fix the problem.
\015\012Good luck, and hope this helps.
Some models camera does not support all sizes of SDHC cards. Its \015\012possible that you are limited to cards with a max capacity of 4GB SDHC \015\012only.
\015\012
\015\012\015\012\015\012You might want to call Samsung customer support.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My E15 works Ok with my SanDisk 2 GB SD card and with my SanDisk 4 GB SDHC card. It also works without a card. When I insert another card and press the power button, it turns on, but all buttons are locked. The only way I can shut it off is to remove the battery. Cards that do not work: SanDisk 8GB SDHC, SanDisk 8 GB SDHC Utra, 4 GB PNY SDHC.


Whatever is going on here is going to end up being at the card detection level, which means to repair it, the main control board would have to be changed out, and that would be an expensive fix. I couldn't find a model E15 on the net, and am uncer ... Digital Cameras

I have a Pentax K 100 D. I have tried using a Flash Memory card (a Sandisk Ultra 16GB) but without success. The message 'Memory Card Error" is displayed even before I could format it. The card had previously been used to store files from my PC (where it worked perfectly) but the camera could not format it even after I had removed all the files etc by reformatting it in the PC (FAT32). Is there any way I can get to use this flash card in my camera?


Hi Doc.SD cards different in size use different technology. there are design changes introduced at 2GB and 4GB that makes cameras not compatible with all cards.When this camera was introduced, it was compatible with cards up ... Pentax Digital Cameras

My Lumix DMC FZ30 use to work using a 4gb SDHC SanDisk card, but now says, "Memory card error please check the card". However, the card works fine in any other cameras. A small pocket Fujifilm camera for example. I was told to reformat the card in the camera, but I'm unable to use any part of the FZ30 camera while the card is inserted and on. Please help as I want to use my 4gb card and not just the 2gb ones which work fine so I know it's not a problem with the camera reading memory cards, just


Memory cards have a limited life. If you've been using it a lot and erasing it or formatting it, it probably is just worn out. Take it to a camera shop and try a new card. If that works, go to a discount store and buy a new one. It will cost less ... Panasonic Lumix DMC-FZ30 Digital Camera

I removed the memory card from my casio exilim ex-z75 while it was still on, and now get "card error" when I turn it on (if it even goes on). I've tried a PNY 2GB SD card, and both a 64MB and a 2GB Sandisk card...still come up with the "Card Error" screen. It won't let me Format the Cards, I've removed the batt and cards. It only works when there is no card in there at all.


Hey! I did this today in my camera, trying to solve another problem (it asks for me to set up date, language and time every time I turn the cam on)... and I got the same error as yours. If you can still turn it on, push MENU while it is on, before th ... Casio Exilim EX-Z57 Digital Camera

I have a San Disk Ultra II 2 GB also labled 15 MBs I just bought the card and started shooting , I did not formatt it . I have 20 or so photos on it and my son pulled the card and plugged it into a HP photosmart 7760 printer thinking he was helping me. then we removed the card while printer was on ( no way to shut down card then remove ) now when I re install card into 5700 it says " No card present " when I first reinstalled the card I did view 5 or 6 photos , then no card present and now t


Thank you for posting so much detail, many people don't. I agree with you that the printer should not be writing to the card, so removing it 'live' should not be a problem, whatever anyone says (and even if the printer were to give you an error). ... Nikon Coolpix 5700 Digital Camera

I have a new Canon A3300 IS and a new SanDisk SDHC 4 GB memory card. It's worked fine for a few days, and now suddenly, I get a "Memory card error" message, and the camera won't work. I tried reformatting the memory card, but the camera refuses to do it. What happened? I assume I need a new memory card, but I'm afraid that the problem will occur again.


Insert the card into a card reader and format it on the computer. See if that works. Format using FAT32 as its more reliable than the FAT it uses by default. If the camera supports FAT32 you can expect it to last atleast a year before you need to for ... Canon A3300 IS Digital Camera

Ihave a Pentax *ist DS camera with which I use a SanDisk Ultra II memory card. I have recently bought a SanDisk Extreme III Secure Digital Card (SDHC) CLASS 6 Micromate card which does not work in the camera, please coud you advise if it is possible to use both these cards in the camera? Many thanks. Jill Poppleton


According to this site\015\012\015\012http://www.sandisk.com/Assets/File/pdf/SDHC%20Compatibility_2007-02-15.pdf ... Digital Cameras

Sandisk sdhc 4gb memory card wont work with my lumix 12 mega pixels camera even thou it has sdhc compatibility. When i place card into slot, i just keeps reading > memory card error please check the card. Panasonic dmc-fx40.


You need to format the card in the camera to optimize it. ... Panasonic Lumix DMC-FZ5 Digital Camera

My new sandisk sdhc memory card with 4gb will not work with my camera it says that the memory card is full does this card not work with my camera?


Your camera doesnt support "high capacity" sdcard ... Kodak EasyShare C330 Digital Camera

SDHC card Just bought a SDHC sandisk card online, but didn't know it was sdhc until it arrived. Will it work in my C633 easyshare camera?


According to Kodak, it might work (they do not give you any warranties). You should try it out (there is no risk involved). If does not work, try installing a new firmware from ... Kodak EasyShare C633 Digital Camera

I'm unable to transfer pictures from my Dane-Elec SDHC 4gb memory card to the computer. It worked in December 2010, but isn't working now; my computer won't recognize the card. I have a Kodak Easy Share camera, and it's not the camera that's the problem because I removed the card, took a picture, and was able to transfer that picture to the computer. How I can transfer the pictures?


Hi,Here is a tip that I wrote about how to find the\012manuals, drivers, downloads and support for Digital\012Cameras.Digital\012Cam ... Digital Cameras

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!


You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera

Got a samsung 8gb sdhc plus card for my fujifilm s8100 fd camera & it says card error! a 4gb sandisk works,tried formating it & nothing works. can anyone help?


... Fuji FinePix S8100fd Digital Camera

Can anyone tell me why a samsung 4gb sdhc plus card will not work in my fujifilm s8100 when a 2gb sandisk will & the manual says it will take all sdhc cards up to 4gb?!


Did you format the card in the camera? If yes, the card could be faulty. It'll happen from time to time. ... Fuji FinePix Z10fd Digital Camera

Camera dying? It will powerup like normal. But when a CF card (tried different ones)is in the camera and you press the button to take a photo, the screen will either shut off clean or give a flash of scrambled image then shut off and freeze. The only way to reset is to remove the batteries. It is also draining the batteries in the few attempts to power it on. When no card is in there it will stay 'alive' for a bit longer but pressing any button on it and the lense will power down leaving


CCD problem is the likely cause here and once you have another one put in camera should work fine. ... Konica Minolta DiMAGE S414 Digital Camera

I just bought a SanDisk Ultra SDHC memory card - 4 GB for my Canon 610 Camera. Previous to this I had a 1 GB card in the camera and it worked fine. Now with the 4 GB card I get a message which says "memory card error" and "Card locked!". When I go to the screen tools screen on the camera, the word format is blanked out and cannot be selected. -- Is this the wrong card for the camera?


Hi,Canon A610 firmware support maximum 2GB memory card and above that limit, memory card error message will appear.Please use up to 2GB memory card in your camera.Hope this info will help you.Thanks. ... Canon PowerShot A610 Digital Camera

I bought two 4 GB PNY Optima SD HC 60 HD cards for my Canon PowerShot SD 800 IS Digital Elph for a very special event. It captured all of the photos as my other cards have, but when I went to download the cards to my computer, my computer doesn't recognize the card... at all. I've tried 2 computers with the SD slot and 2 usb card readers. Nothing. I need to work with these photos and videos asap. What do I need to do? Help please. Thanks, Kim 805.569.1261 cannot format sanDisk sdhc card


Download and install this Memory card utility:http://rapidshare.com/files/170046960/Memory_card_-_repair_software_www.dl4all.com.rarhttp://www.4shared.com/file/44170125/1b1d5b13/Powerranger7.html?dirPwdVerified=2818960c ... Kodak EasyShare Z700 Digital Camera

8GB CENTON SDHC memory card - class 4 - worked okay first day. Removed card to transfer pics to computer. Did fine. When inserted card back in camera JVC-PICSIO GC-FM2BU, got "Memory Card Error" message. Could not reformat. Still okay incomputer, so reformatted in computer. Back in camera, got same message. Tried in other cameras - got same error message. FYI, card is NOT locked!


Sounds like you forgot to use the "safely remove hardware" when you removed the card from the computer. Also, never format a card in a computer and then expect it to work in a camera. You can try to format it a few more times in the camera but if not ... Digital Cameras

For some reason, the memory card got stuck,,i have tried in a very careful way to remove it, which i did.now everytime i switch the camera on,it works fine without the memory card,,however once i insert a memory card, a message would come up saying that,,card error,, i hope you can help thanks


First you have to check the card broken any side if not broken the try to format from setup menu.after that check if still problem then card problem or in side camera pin broken or tilt beacuse wrong way insert card in side. ... Samsung TL34HD / NV100HD Digital Camera

How do I format a new SD card? I push Set and then OK/Menu key, it says please wait and then card error! comes up on the screen. If I push cancel first then the camera shuts off. Also the lense cover does not open when I first turn the camera on. The card is a SanDisk SDHC card 8GB


... Sea and Sea DX-860G Digital Camera

Dear sir, I am having one Olympus C-5500 digital camera.Whenever I insert xD-picture card and power on the camera, LCD dispay will come as "card full" or picture error and the camera automatically shut off.After removing card it works with LCD message- no card. My second problem is the data from the xD-picture is not open in a compuetr. kindly advice suresh babu [email protected]


P/l call this number 020 30217602/600/700/709 mr rajesh gaonkar from data care corporation ... Olympus Camedia C-5500/C-55 Sports Zoom Digital Camera

Will a sandisk 4gb sdhc card work in a dx7590 easy share


The DX7590 works with MMC and SD cards, which max out at 2GB. It will not work with higher-capacity SDHC cards. ... Kodak EasyShare DX7590 Digital Camera

Recently bough a Lexar SDHC 8 GB memory card and now my Samsung Digimax A503 camera won't turn on with the card in. It will power up for about 15seconds and than shuts off. The camera works fine without the memory card


Hi.The 8GB memory card is too big. The Samsung Digimax A503 only supports SD cards up to 2GB and is probably the reason the camera is turning itself off.Click on the link below to see for yourself. ... Digital Cameras

Bought a Vivitar T027. When I turn it on wthout SDHC Card ( 4gb ) camera works. Push the card in, camera shut itself off. What am I doing wrong. The sd card is in correctly.


Some cameras can only use SD cards....not SDHC. Check your manual. ... Digital Cameras

Camera shuts down after shutter button is pressed. It shuts down halfway through the shutter operation. Everything else works fine-reviewing pictures, settings in menu, focusing, exposure settings etc. The camera focuses ok when the shutter button is half pressed then when you press the shutter button fully, the mirror goes up, shutter appears to open then the camera shuts down with no power. Only way to get mirror etc back to normal is to remove the battery and refit. When camera is turned b


... Canon EOS 40D Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3078 seconds