Having problems with your Digital Cameras ?
The lcd monitor does not display
\015 The display shows nothing in any of the modes,except the stich assit mode and does not show a display in the play back,I'v tryed the disp button,but nothing happens\015
But are u sure that it is able to capture images? are u able to transfer the images to your PC?
Repair Help & Product Troubleshooting for Digital Cameras
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
D40X LCD Hi Dear Because of the removal of the control panel LCD the D40X uses the main LCD monitor for camera information display and the change of settings. By default this display is not shown, instead you press the 'info' button to show or hide it, you can optionally have the display on all the time. My question is: What i have to do for have the LCD always on. Thank you Quim
Return the control panel in order back to normal. ... Nikon D40x Digital Camera
I have a swing-out LCD display on my powershot camera when opening the LCD display the image appears upside down how can i resolve this? there were never problems in the past.. when closing the lcd display on the back of camera with the display face-up no image shows..i would really appreciate help to resolve this problem as i'll be going on holidays soon..thankyou..Anna
The camera requires partially dismantling in order to fix this. if you cannot do it yourself then you will have to take it somewhere but be warned it wont be very cheap. If you live in new zealand i could do it for you however unlikely that is. ... Canon PowerShot A85 Digital Camera
PV-DC152D CAMCORDER, LCD Display only works if it is pulled out, turned 180 degrees and pushed back into place so the display is facing you. If you move the LCD display over 3/4" away from camcorder it will go black again. Personally, I think this is an issue with some sensors that gauge when to turn on the LCD display "ON" and Viewfinder "OFF" and vice-versa. Any help on this would be appreciated since there is nothing else wrong with the camcorder.
The most likely problem is a cracked ribbon cable that goes between the camera and the display. The cable needs to be replaced. Typical cost for this is around $40 or so plus labor. I would not suggest that you attempt this repair yourself as open ... Panasonic Digital Cameras
Camera repair The LCD display is white with red lines going through it. Even the viewfinder does the same thing -- white. When I hit the view button, the same thing sometimes. It seems to do worse outside. You can faintly see the pictures I took in the LCD display. Now the LCD display is totally black. What's wrong. The menu display still works. What can I do?
Time for a new Camera. It is about 150.00 to replace the LCD. it is cheaper to replace it unless you can just use the viewfinder alone!! ... Kodak EasyShare Z612 Digital Camera
Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!
You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera
Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho
I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera
The top (monochrome) LCD on our Nikon D80 recently broke. I think that it is actually called the "Control Panel," and displays settings, battery life, number of pictures remaining, etc. Please note that this is not the 2.5" color LCD on the rear of the camera. I know that it is merely the LCD because the backlight works, as does portions of the LCD display itself. Does anyone know of a guide or video to perform this repair? Also, does anyone know the part number? I plan to call Nikon tomor
Hi Jason. First of all, depending on the age of your camera and the warranty you purchased, this camera may be under warranty which would result in Nikon fixing it for free. \015\012\015\012Here is a free downloadable manual for your camera ... Nikon D80 Digital Camera with 18-135mm Lens
LCD replacement Sony MAVICA MVC-CD400 I have cracked the original LCD display and want to replace it. It is fairly easy to get to and remove, but I can't find a way to buy a replacement. I cannot find a parts list from Sony or elsewhere on line. THe better parts places might stock it, but they don't call it an 'LCD display' I did find "optical device" at 2 parts places, but neither one has a picture of it so I am not sure that I am buying an LCD or maybe a CCD or even a Lens assembly. does anyon
I have the same problem and have found a Level 2 Repair and service manuel complete with diagrams and circutry. Go to http://www.eserviceinfo.com/downloa ... Sony Mavica MVC-CD400 Digital Camera
I have (2) DGS-200 Moultrie cameras that the LCD display has gone out. Replaced (1) with the LCD display from a Moultrie 100. Worked great but I still have two cameras that can't be programed without seeing on LCD. Is there anywhere to purchase these LCD screens or purchase non-working Moultrie cameras?
WWW.MOULTRIEFEEDERS.COM WILL SEND REPLACEMENTS AND INSTRUCTIONS FOR FREE.... ... Moultrie MFH-DGS-100V2 Digital Camera
My cibershot DSC-F717 does not have anything in the viewfinder and the LCD displays the settings and options.The screen is black with yellow words and numbers Also my zoom will not work. The LDC does not have an image on the viewfinder nor the LCD. I do have the LCD setting options displayed. The zoom will not show where the setting is on the LCD and I have checked all the settings (the focus on the zoom mode, conversion in the set up turned to off).
HelloThank you for using FixYa for your problemYour camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras ... Sony Cyber-Shot DSC-F717 Digital Camera
I'm having Nikon Coolpix L11, the 2.4" LCD display is broken. I want to buy the same LCD display. From where I can procure this at less price. Even I can open and replace the display easily. Please help me. The Nikon service centres are charging a lot. I'm staying at New Delhi. My name is Rajeev Kumar.
Contact me on 09893433339 ... Nikon Coolpix L11 Digital Camera
My LCD goes partially black when I turn the camera on and shows a diagonal display of the photo from the upper left hand to lower right hand corners. The amount not black is not sufficient to take photos. I can make the LCD give a full display if I "jiggle" the photo settings devise from view to photo. I have tried this about thirty times and it always restores the LCD. I asked Canon Service Tech Support if the problem merited repair. Of course they said yes, but the flat rate they charge
Hi , i think you need a lens alignement;;\015\012and focus adjustemt\015\012hope that will help...\015\012goo lucks;;but if iw\015\012as in your place\015\012i will try to find another one the price get very low for this ... Canon PowerShot SD800 IS / IXUS 850 IS Digital Camera
Lcd display not working.nikon p500 went into watrefalls.. after putting it into ricebag for few days ( service center guy told it can t be done) after few days i could switch on camera , and could take pictures from view finder, lcd display seem to be not working.. any thing advisable to make work? can i go for new lcd, if so how much it would cost..
Yes you can replace it You must to do the decission replace LCD vs New camera. Call or go to NIKKON and ask them where is difference in cost Sometimes replace is cheaper that to buy. Other is better to buy that replace specially in USA.God bless ... Digital Cameras
I am looking to buy a olympus m9010 camera. When you switch on the camera the date and time settings appear. If i don't set it, it will appear every time i switch the camera on. So i wanted to know if i set the date, time, year settings will that display when i transfer to my pc and when printing or it displays only on my camera LCD. i have this doubt because whatever is displayed in lcd will be the same when you transfer to PC. Hence please clarify. It will be better if you answer to the modeln
... Olympus Digital Cameras
Lcd panel I've just bought a new canon eos 350d and the lcd panel will not show the image of what I am taking a picture of. I can take a picture, and display it back on the lcd panel but just not display what is in the viewfinder when I want to take a photo. Have I got a setting wrong somewhere or is the camera faulty? thank you!
SLR's don't show what your seeing through the view finder on the LCD. That is a function on point and shoot cameras, not on SLR's. ... Canon EOS 30D Body Only Digital Camera
My Samsung TL220 lens won't close. It doesn't display an image on the front or the back. However, when I trigger the menu, the lcd displays "No Image File". It does go through and displays all the different menu options, so the lcd must be o.k. Could this be fixed with software or software update or do you think this is a hardware problem? ( I've noticed several TL220 that have this problem.) Is it an easy fix & how much do you think it would take to fix? Thank you.
Well, there must be a setting that was unintentionally set. First, I need you to try restoring the camera to its default settings. Go to Menu settings and then choose Reset. Let me know if this works or not so that we can move forward to other fixe ... Samsung DualView TL220 Digital Camera
LCD Display I was using my A95 yesterday. I have had it for 3 years with no problems. There was a spot of dirt on the LCD display, I wiped it off with my cotton tshirt. No more display. Just a white screen with lines. What did I do? Can it be fixed?
Canon will fix this problem free of charge.Details:http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=221&modelid=10468&keycode=2112&id=48264I called them today. They were great o ... Canon PowerShot A95 Digital Camera
No Display The LCD does not display anything when the mode is set to take a photo and when a photo is taken it is a black screen, however the camera setting displays do appear on the LCD.
This is a CCD problem Depending on the age of the camera it may be repaired free- but if preices are mentioned - just go for a new camera ... Canon PowerShot A60 Digital Camera
LCD' My A95 LCD is displaying a pinkish/purplish lineS which disappear on focusing. Afetr taking the picture and displaying it a slim purple line on the top of the LCD?
Its problem of bad CCD Imager Sensor in your Canon A95 camera and this part will be replaced.Canon has announced Free of Cost repair scheme for same fault in A95 models. Click ... Canon PowerShot A95 Digital Camera
My sony dsc-w1 got very wet, caught in a rainstorm and did not have the case. I have left it dry out for 4 days and it turns on, lcd works, can read memory stick and display old pictures on the lcd. But when I try to take a picture the lcd displays a black a screen and the picture that it takes is just a black box, flash illlumintor everything else seems to work, except the ability to take a picture, lens moves in and out, but picture is always black, any idea, is the ccd shot
Maybe the shutter got wet and sticky. You can try look into the lens then press shutter button to take picture. If you don’t see the movement inside the hole, the shutter doesn’t open, it will take black picture. ... Sony Cyber-Shot DSC-W1 Digital Camera
The LCD is black when trying to take a picture. Also, I can not view pictures on the camera's LCD display. I am able to view the MENU on the camera's LCD display. Please advise.
... Nikon Coolpix L11 Digital Camera
LCD Display I haven't used my canon for a while - I've just turned it on and though the LCD display works to show pictures I've taken and the settings screen - I can't see anything in it when I take a picture (it's just black) when I press the Disp button it just switches from a black screen to the settings screen - please tell me what I can do so that I can see the image in the LCD before I take the picure. Thanks for your help
As far as I am aware, the 400D doesn't have a live preview mode.What you are describing is perfectly normal and is how 99% of digital SLR cameras behave.Are you sure it used to do this?Matt ... Canon EOS 400D / Rebel XTi Digital Camera
I have a Canon Powershot 5S IS. The image on the LCD screen is not rotating when I rotate the screen, and when I snap the screen into place with the LCD side out it goes from displaying on the LCD to displaying on the viewfinder. It was working properly before, but I can't figure out how to get it back to those settings.
On camera menu, turn on Reverse Disp. ... Digital Cameras
A95 LCD My A95 LCD is displaying a pinkish/purplish lineS which disappear on focusing. After taking the picture and displaying it a slim purple line on the top of the LCD?
Its problem of bad CCD Imager Sensor in your Canon A95 camera and this part will be replaced..Canon has announced Free of Cost repair scheme for same fault in A95 models.. Click Canon CCD Advisory to see details f ... Canon PowerShot A95 Digital Camera
LCD Display When taking a picture I am not seeing any display in the LCD.
I used to see the screen before taking a photo as well. Now it doesn't show anything. Whether this is 'normal' or not, I want to be able to see the screen again. This is a very expensive camera and I want to be able to have the functions I had whe ... Canon Rebel XT / EOS 350D Digital Camera