Having problems with your Digital Cameras ?

My webcam not working showing device disconnect


\015 Showing device disconnect\015

Answers :

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My webcam not working showing device disconnect


... Digital Cameras

Hi.I use a mercury cyberpix S555V digicam(5 megapixel).I have windows 7 on my pc.I want 2 use it as a webcam on my pc & it supports the feature too.But even after installing its driver from the CD provided in the box,it does not detect the driver.Error message is "THE DRIVERS FOR THIS DEVICE ARE NOT INSTALLED ERROR CODE 28.My USB cable is perfectly fine as it works well while 'Mass Storage".Pl help me connect it as a webcam.It works as a webcam on XP but not on windows 7.Pl help.


Hello, please get the driver here :\012 Support">www.mercury-pc.com > Support \012\012www.opendrive ... Mercury Electronics CyberPix S-555V Digital Camera

I need help. I've used my memory card many times with no problems. Now I put it in my laptop and absolutely nothing happens. It shows under "Devices and Removable Storage" but nothing happens. Under its "Properties" it says "the device is working properly". The AutoPlay is set "Use AutoPlay for all media and devices" I've even tried-- •Follow these steps: 1.Click the Start button , click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... HP Photosmart M425 Digital Camera

I cannot transfer from my camera to the computer all the time because it doesn't always sinc up. The icon on the bottom left doesn't show up showing the camera connection and easyshare message says no device located but sometimes it does work. Thoughts?


I never use the stupid docks and stuff like that I find them as useless as you have just described. I just take out the memory card and place it into a memory card reader and then it acts like those usb dives showing up as another drive and you can g ... Kodak EASYSHARE CD33 & Printer Dock Series 3 (Pack) Digital Camera

I have a Polaroid i533, when I plug the USB cord into my computer, connect it to the camera, turn the camera on, no mass storage device is showing. Windows XP supposed to be plug and play. I bought a card reader, and when I plug that into my USB port, and insert the 2.0 GB SD card, it shows drive F on MY COMPUTER, but says there is nothing on it, insert a disk into drive F. What the heck? How do I get this card reader to work? Thanks!


... Digital Cameras

My HP M527 digital camera works well with my Macintosh iBook G4 using Image Capture. However, it does not work with my iMac desktop even though I am using the identical software. With my iMac, I get all indications that the camera is connected but all I get is a continuing mwessage "..waiting for the device." I have tried disconnecting my all in one printer, but get the same results. I'm using Mac OS X v 10.4.11 and Image Capture versio 3.3.3 on both computers. Any suggestions? Than


Locate and copy the driver into the desktop...or locate it somewhere on the net ...it is not enough to use the software that makes the camera available for commands and all ...but it needs the actual driver for to communicate ...it is searching in l ... HP Photosmart M527 Digital Camera

Webcam 1.01.3.6656 spc 530NC shows a totally green screen on my main computer and does shopw a picy ture om loungs on my lap top BUt does not work with skype


Try reinstalling the drivers and software, first remove and uninstall the webcam from your computer.\015\012\015\012drop me a comment if you need a download link to the software / drivers. ... Philips Digital Cameras

Using 4 2.4ghz cameras with stk1160-001 usb box, on windows xp duel core. easyview software no good, tried using other webcam motion detect software but cant see camera pics on screen, only an off sync pic which does change when holding hand over camera, cant see what the picture is, the device will only work with easyview, why? If i connect a plug from a camera into the video input connector on the unit i can use other softwear, as this signal must be composit video input which then passes the


... Digital Cameras

My computer no longer detects my canon A570 camera. I have done all of the usual fixes such as usb cable, etc. I have reinstalled the software and everything else works. On the scanners and cameras tab it doesn't show the camera as a device. I am running the windows Vista OS. Thanks Jerry L


If you're saying that when you connect the camera to your computer and computer wont even recognize that a new device is connected to it, the problem here can be with your USB port on the computer , just to doible check did you try connecting a diffe ... Digital Cameras

My m6607m webcam wont work, whenever i try to show my cam to a friend on msn, it freezez msn.if i unplug the camera, and replug it, it says 'usb not recognised, windows has malfunctioned'


... Oregon Scientific DS9810 Digital Camera

Hi I have a Creative Live Optia webcam that i have had for just over 4 months now (from new). It was working fine until about 2 weeks ago then it stopped displaying any picture at all. I have tried it on my other pc and a freshly formatted laptop with no luck. Windows recognises it with or with out drivers the same goes with Windows Live Messenger (Skype will with drivers) but with no video out put. The cam its self shows the blue light when its ment to be in use it hasn't been dropped,punched,k


Unistall the webcam program and then reinstall it with the cds and tell me if this helps any.\015\012\015\012Let me know if this works :) ... Digital Cameras

Hi, I am trying to upload photos from my Fujifilm Z20. I've not had any problems before but for some reason it now no longer works. When I disconnect the usb it recognises this with the usual "bleep" but when I reconnect it makes a different sound than usual? I've looked at "My computer" but it doesn't show the camera there. Please help...Thank you...Glenn


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Fuji Finepix Z20fd Digital Camera

My Powershot A75 is not being recognized by my windows box nor my macintosh. I have tried different devices with the same cable and USB port to make sure it was not either of those. The camera showed up briefly on the Mac the last time it worked and then disappeared.


Do what the pros do...use a card reader. ... Canon PowerShot A75 Digital Camera

Hi there. I have an Olympus E-510 that is about 3 years old. It's been working fabulous until just until recently. I connected the camera to my computer and downloaded some photos just like I always do with no problems - disconnecting it as I always do (USB). The next time I went to use the camera, the USB storage screen shows up and I can't get it to go back to the original setting to take photos. I can still download any images from the camera but can't get off that menu. I've tried the reset


I'm not really sure what's going on, but it could also be a hardware problem, or maybe ribbon connector inside the camera from the usb port to the main board, or maybe a bent pin in the usb connector.\015\012Check it out carefully, and remove t ... Olympus EVOLT E-510 Body Only Digital Camera

I have 2 pentax optio m20 cameras purchased at the same time. Both have developed the same problem: hit the on button and it tries to come on, but makes a funny sound, lens moves in and out trying to focus (screen is lit showing focus changing and green mode icon), then the camera shuts off and never gets into picture taking mode. I fixed one of the cameras once by pushing buttons after connecting and disconnecting from the computer (and the camera worked okay for several months), but repeate


Your previous diagnostic definitely\015\012 indicates a mechanical problem, once the possibility that a false \015\012sensor signal to the main board as the cause by resetting all functions.\015\012 It is very likely that ther ... Pentax Optio M20 Digital Camera

I think that I may have deleted my pictures when I pressed the "format" button rather than the cancel button on my camera. When I tried to view my pics, the message said that there were "no files" but the picture counter at the top right still shows the number of pics in my camera. There is also a "lock" device that I do not know how to work. I have a Casio ExiLim Can you help me


Do you have a memory card in this camera? ... Digital Cameras

I have an Olypus FE-230 Digital Camera, and I was trying to upload photos to my computer. This wasn't working, so I ejected it, but instead of ejecting I was told the device was improperly removed (though I hadn't disconnected it at all). Now when I turn it on I only get a screen with two options: Power Off or Reset. I've only clicked Power Off, but I can't get anything other than this screen. The battery was running low so i've charged it. It isn't fully charged, but should be at least half-way


Do the reset. ... Olympus FE-230 Digital Camera

Kodak Easy Share camera - I'm using ScanDisk as a device to plug my memory card into and transfer pictures. I somehow got it to work once, but Kodak Easy Share usually tells me "no device detected". My control panel tells me the device is there and working fine. I tricked it once by reinstalling and Easy Share software actually allowed me to download my pictures (last night). Today it is saying no device detected again, and nothing seems to work.


I bought a 4gb scandisk sdhc card and my camera wants to format the disk but it won't ... Digital Cameras

Sept. 25, 2010 Gentlemen: I have an Ezonics USB Webcam III. How far, in feet, from my computer (running XP) can I use a USB 2 or a (USB) cable and still have my webcam work? I would like to place tjhe camera about 80 or 90 ft. from the computer USB port. Would that still let the camera work? Perhaps there is a little amplifer I could use to get the signal from thje camera to the computer. Please comment and advise on these matters. If the little EZ III webcam can't work at that distance, c


If you have a USB cable that is long enough, the webcam will still work. As long as the camera is connected to the computer via the USB port, it will work. ... Digital Cameras

SONY DSC T33 SCREEN STOPPING SHOWING. CLICK SONY DSC T33 SCREEN STOPPING SHOWING. CLICK BUTTON,FLASH WORKS AND IT APPEARS TO TAKE A PHOTO BUT NOTHING SHOWS. ALL ISONY DSC T33 SCREEN STOPPING SHOWING. CLICK BUTTON,FLASH WORKS AND IT APPEARS TO TAKE A PHOTO BUT NOTHING SHOWS. ALL I CAN VIEW IS OLDER PHOTOS TAKEN BEFORE THIS FAULT AROSE (without warning) WAS NOT DROPPED/ ABUSED OR ILL TREATED. NO MARKS/CRACKS ON SCREEN. ...


This is due to failure of ccd imager chip in your camera, replace ccd imager chip to get live view in lcd to take fresh pictures.Let me know if you need ccd imager chip part number. ... Sony Cyber-Shot DSC-T33 Digital Camera

Hi my arcsoft built in webcam in my vaio suddenly is not working ,,, i think that the webcam is driver not installed , a messege appears the the webcam is not connected ?? it worked fine for some time please help


... Digital Cameras

I was having trouble installing the drivers for my creative notebook camera(its a VF0250) and i downloaded the latest versions straight from the website. when i would plug it in it said "device not recognized" and would search for the drivers but never found them. until i manually had to find them. i went on device manager->right clicked properties then went to the driver tab and clicked update driver-> clicked imaging devices and found the creative webcam driver there. now atleast the webcam re


You probably installed the wrong driver by doing that ..and what you need to do is go to the support site ..and download and install the correct one ...the camera need to be identified and to say that the device is installed and ready to use in order ... Digital Cameras

My camera worked before by uploading pics onto the comp. Now it doesn't let me at all. I tried to upload tonight and first noticed the problem. So I restarted and got back on tried it again it worked but only half of the way then it said unable to read device (I already tried to troubleshoot the device in my comp nothing came back wrong). I then restarted again and this time it didn't even try to bring up the pics it just came up with a screen that said Unable to read device. I deleted the softw


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Kodak EasyShare V1073 Digital Camera

My camera was working fine for about a year. Then one day i turned it on and the screen was black but it shows the grid and date and time also it shows the menu and the differnet scene selections. If i take a pic the flash works and the sound works, but no image just black and the time and date. i think its the shutter that is stuck?? How to fix this?? Not under warranty anymore.


Take the camera andturn off the flash. Point it toward you and take a picture. Look in the lens to see if you see the shutter activate. If you dont see this work, then your shutter may very well be stuck. \015\012\015\012There isn't reall ... Olympus FE-310 Digital Camera

I have lumix dmc-lz7. Tonight I put a 2 gig sd card into my built in card reader , Dell pc and it didn't work and did not even show the drive on computer. Then, to check it out, I connected camera to usb port and it then worked with the reader and showed the drive on the comp. Why doesnt card work alone in reader?


Maybe the card reader is not SD/SD HC compatible, the same problem occurs wiith the Memory Stick Pro/Duo of sizes 2GB or above in my Desktop Computer (Compaq) and not in my Notebook (Compaq) the card reader and the machine are newest and are compatib ... Panasonic Lumix DMC-LZ7 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2262 seconds