Having problems with your Digital Cameras ?
I bought a webcam spc110nc And it will not come on. The computer says it's ready to go.
I fixed it by returning it to the store. I was not about to pay $15 to see if a $20 camera could be made to work. I also am not about to buy another philips product.
Repair Help & Product Troubleshooting for Digital Cameras
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I bought a webcam spc110nc And it will not come on. The computer says it's ready to go.
I fixed it by returning it to the store. I was not about to pay $15 to see if a $20 camera could be made to work. I also am not about to buy another philips product. ... Digital Cameras
My new Insignia Digital Photo Keychain won't load. I bought 2 of them, and both of them when I connect them they say ''connecting'' on the blue screen, but they never come up on my computer. My device driver says there is an error and it cannot upload the device driver. I don't know what to do to bring up this software if my computer won't recognize it when I connect it.
... Digital Cameras
I want to put my pictures on my computer, but the last 4 pics i took says that they are in the internal memory, when i bought my camera, it did not come with a cord~i put the memory card in my computer and download them.
Hi deltaspell ,Please find the solution as below :- \015\012\015\012If you can get a data cord from the market for this model , do get it and connect your camera to your computer for access to your camera' ... Fuji FinePix S700 Digital Camera
I have just bought a trust webcam 100k series today and i have followed the install prcess. When i click on the "amcap" from the start menu like i have been instructed to the box comes up blank and says "this graph cannot preview" help?
... Digital Cameras
I just bought a Vivicam 8025. It comes with a 3 inch disc with user's manual. I cannot use a three inch disc in my computer. I can take pictures, but the camera won't save them. It says my disk is full. The disk is also new, so I know it's not full.
Hi\015\012\015\012the 3inch disk fits into the same drive as your cd just place it in the center depression of the CD/DVD drive \015\012\015\012as for the disk full error check to see from the camera settings if you have set t ... Digital Cameras
I just bought an Olympus 5010 from Harvey Norman. It did not come with a CD to load any software. When I connect it to the computer and try to initialise the camera, it says that the path is incorrect. It is looking for Olympus Digital Camera / Setup.exe
Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Olympus Stylus 5010 Digital Camera
I just bought a new Canon Powershot SD 750 camera and my computer will not instal the software it came with. When i try to intal it, a box comes up saying "The screen resolution to execute Digital Camera Solution Disk is not sufficient." what does that mean?
Check that the screen resolution on your pc is high . \015\012You can find this in Control panel, display, settings. What do you see there? ... Canon Digital Cameras
Soft ware yes i bought a DXG-305v but it did not come with the software. Where can I go to download in my computer NEED A LINK FOR DRIVERS I dont Received the software for fix the cam the box say that it have it but it wasnt true. and i needed it will not install to my cumputer
Go for google search and type ur product id for search of software ... Digital Cameras
I've just purchased this camera and plugged it into a usb port in my computer, as the instructions say to do, in order to set the camera up. My computer does not come up with anything that allows me to set it up. It comes up with a dialogue box on the computer that says 'camera connected - select the program to launch for this action' but there is nothing to select. I have Windows XP SP3 so I have the required system requirements.
As a work-around, you should try using Picasa to download the pictures off of your camera.\015\012\015\012\015\012Picasa is a free download from Google and has many cutting-edge features for picture management. I think that you'll like i ... Olympus SP600UZ Digital Camera
My photos won't transfer to my computer. The the last time I loaded photos onto my computer which was last week, it worked fine. however today the same computer says it does not recognize the USB device, so the camera wizard will not come up. I work in a office so in tried several different computers, none worked. some say usb not recognized, some say there is a power surge at the hub, whatever that means. So bottom line is I'm not able to get my photos onto a computer. What changed since last w
Change the USB port. If you are connecting it to front USB of your computer, try connecting it to USB port at back of computer.. \015\012\015\012The cable might be fauty. ... Kodak EasyShare C330 Digital Camera
My webcam i go to use my webcam and it come up error and says "this application has failed to start because kdu_v32r.dll was not found. reinstaling the application may fix this problem I cannot open my id on yahoo messenger so i did was re install the messenger but before it was completly finish it says that kdu_v32R.dll was missing and by reinstalling it again, it will fix the problem. I did as the command says but i end up with the same problem. I cannot open my webcam when im using the messe
Try posting problem in the correct area, this one is for Canon Digital Cameras. You may get the response you are looking for. ... Canon Rebel XT / EOS 350D Digital Camera
My name is Chris and my wife just bought a Panasonic DMC-TZ5 digital camera. I was trying to install the hardware to my computer and have the installation disc. Everything is loaded onto my computer, but my computer consistently says that the "USB Device Not Recognized". I went to troubleshoot the problem and it says that "there are no drivers installed" in my USB port. I'm currently using Microsoft XP Professional. I'm running out of options. I'm not sure if my computer is compatible with
I use a memory card reader (about $15) to retrieve photos and toss the software that comes with the camera.\015\012\015\012Another possible solution would be to go to panisonic.com and download the latest software.\015\012\015 ... Digital Cameras
I bought this webcam A4Tech PK 836-MJ. The specs says that it can be installed for Mac OS 10.4 and later.. Unfortunately, I updated my Mac OS to 10.5 a day before I bought the webcam. Now it won't install itself. Is there a driver that I can get for me to use the new webcam I purchased? Please help for other possible options. Thanks!
Http://driverscollection.com/?H=PK-836MJ&By=A4Tech ... Digital Cameras
Wont read card,says full or card error,....hmmm,bought two new cards,first one it accepted as empty and ok but once filled and images deleted after transferring on to computer it says card full.New card bought 4gb,now it says card error,which it hasnt said before,help,thanks,Gary
Sounds like you didn't format the cards in the camera first before using them. Try that now. ... Panasonic Lumix DMC-FZ20 Digital Camera
Uploading pictures whenever i go to hook up my camera to the computer it comes up saying connecting to pictbridge device then a minute later says enable printer to connect and underneath says switch on menu then i do that and all it does is come up with usb connect......do i need to change it from pictbridge to ptp or mass storage or what? i dont know what just happened..its worked fine for me every other time
Mass storage is easier, in my opinion. In that mode, when you hook the camera up to the computer, it will show up as a device in My Computer. Then you can just access your pictures there. ... Sony Cyber-Shot DSC-S500 Digital Camera
I just bought the olympus X-42 and it took pictures fine. Then I uploaded them onto my computer. After that I wanted to take more pictures and now it says, "Write Protected" I looked at the instructions on how to remove it, it says, "Use a computer to cancel the read-only setting." I don't know where that is.
This is almost always a setting with the "write protect" or "lock / unlock" tab on the SD or SDHC memory card itself - and is easily remedied. Remove the memory card from the camera if it isn't already, and look along the left edge of the card. Find ... Digital Cameras
I just got a second hand bought Kodak EasyShare C913 camera. After I got it I took only 7 pictures, after that it wouldn't let me take any others because it would say 'internal memory is full.' I just bought an 8gb memory card and I'm pretty sure I programed it so the camera reads that it's memory goes on the card and such. But it still says the memory is full and I'm not sure why. I don't know much on cameras I just want to use it for pictures and then to upload them onto my computer. Please he
The C913 is designed to work with SD cards. Your 8GB card is actually an SDHC card. While SDHC cards will fit into the slot, they will not work. You need to use SD cards 2GB and smaller. ... Digital Cameras
PC Camera When I hook it up to my computer it asks me if i would like to use it as a PC camera, like a webcam, but when I choose that option my computer does nothing and says there is no webcam hooked up.
I have the same problem with mines ... Optimus DS-5080 Digital Camera
I have a Kodak easyshare m320 which I recieved today. I bought an SD card to go with it because the internal memory is really small. Near the card port, it says it accepts SD cards, and it also says this on the manual, but the card I bought for it is not being read by the camera. I can put the card in my computer and it works fine, though, so I don't know what the problem is. Do I need to do something to my camera in order to make it use the card rather than internal memory?
First, with no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory. Then, insert the card and do the "format" thing again to optimize the card for the camera. Now, it should work pro ... Kodak EasyShare CX7430 Digital Camera
I bought a 2GB and a 4GB SC memory card. They say needs formatting when I put them in the camera and when I try to format on computer it says it can't be done. I have never done anything but pop in camera and then to computer for Kodak Easyshare
Never format a camera card in the computer...it's a different operating system. Always format a new card in the camera. Just go into the menu and find "format"...follow the on-screen instructions. ... Kodak EasyShare C875 Digital Camera
I want to use the camera as a webcam but once I plug it into my computer, the screen shuts off, which I think its suppose to do. And when I try to detect it on my computer to use it as a webcam it says it cant find anything.
You have to have a driver to do that. Once it loads up, It will appear in my computer as a webcamera and a removable device as well. ... Casio Exilim EX-Z750 Digital Camera
I'm ready to download my pictures from the camera to my computer, but I don't know how to do it. I Installed the software, then it said to return to the getting started guide, which I did. Only, the book doesn't tell me what to do. It shows a picture with the USB cable and where to plug it in on the camera. I turned the page and it says congratulations for transferring the pictures to the computer. It doesn't say how to do it. What shall I do?
What is the make and model number of your camera? Let me know and I will be able to help you.\015\012\015\012cheers ... Digital Cameras
WHY DO I HAVE TO PAY TO TALK TO YOU ESPECIALLY AS A NEW CUSTOMER? ALSO I AM NOT COMPUTER LITERATE . I AM TRYING TO ASK YOU FOR A BOOKLET FOR THIS CAMERA. IT IS STUPID TO THINK EVERYONE CAN MANAGE A COMPUTER ALTHOUGH I TRY VERY HARD .I AM 73 AND HAVE NEVER WORKED WITH A COMPUTER. I FIND YOUR FIXYA IS SAYING TOUGH IF YOU CANNOT USE A COMPUTER! i have bought a camera PL55
Here you go.\015\012Unfortunatl fixya is not owned by Samsung.\015\012In the future go to any search page and just put in the "Brand, model #" and I bet you will find what you are looking for.\015\012Click on the link below\01 ... Digital Cameras
Transfering pictures I dont have a memory card yet, so my pictures are saved to the camera's memory. I use the plug to transfer my pictures to my computer. I plug in the camera, then turn it on. The lense usually comes out and something pops up on my screen of my computer that asks me if i want to transfer my pictures to a folder on my computer, but now the lense doesnt go out when i turn it on while it is plugged in...and on my computer it says that the pictures are being transfered and then it
You must start the Explorer (windows key + e key).\015\012You should see your camera on the left.\015\012Right click on it.\015\012Click on properties.\015\012Click on Test Camera.\015\012Click on Set time (in order to s ... Nikon COOLPIX P4 Digital Camera
Gone? I had my memory card in a ready hooked up to my computer. I took several pictures off the card and saved them to my computer. But I left several pictures on the card. I put the card in my camera and got a no image message on my camera. I took the card out put it back in my computer and was able to view the photos. I but it back in my camera and there were still not available. So I went to the menu of my camera and selected the format card button. Now it says my card is empty. Is there anyw
Buy a memorycard reader and stick it in the computer. not by usb cable on the camera\015\012\015\012then\015\012\015\012You might use a program like ontrack easy recovery.\015\012choose data recovery then formatrecovery. ... Canon PowerShot A410 Digital Camera