Having problems with your Digital Cameras ?

LCD Monitor suddenly does not work. No other apparent problems, and cycling the power or display button does not change the Monitor status.


Answers :

Which camera is this and does it display the settings or a previously taken pic ?
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

LCD Monitor suddenly does not work. No other apparent problems, and cycling the power or display button does not change the Monitor status.


Which camera is this and does it display the settings or a previously taken pic ? ... Digital Cameras

Green light on camera back to the right of the 'delete' button continually flashes on-off about 1 second intervals as soon as battery is inserted as long as CF card is in place. Switching camera ON produces no visible operational indicators. Depressing "Menu" button flashes: hour glass; menu display; blank screen. Holding button down just cycles as above. Swapped lens, data card, battery, connected EH-5 power source; nothing makes any difference. Checked same lens in another D70 camera; it's OK.


I would start by looking into the memory card slot to see if you have a bent pin. You may need a small light and a magnifying glass to see them. If the pins are okay, then you can try a reset by holding down the BKT and metering buttons toget ... Nikon D70s Digital Camera with 18-200mm lens

My DSC-H9 will not display stored pictures or video. When I push the button to switch from picture taking to picture viewing it shuts off. Changed battery, memory stick, did "reboot", pulled battery for 30 seconds. Nothing made any difference. I can plug in to PC and view or pull pictures off. It's like the mode button is also a power button.


... Sony Cyber-shot DSC-H9 Digital Camera

D40X LCD Hi Dear Because of the removal of the control panel LCD the D40X uses the main LCD monitor for camera information display and the change of settings. By default this display is not shown, instead you press the 'info' button to show or hide it, you can optionally have the display on all the time. My question is: What i have to do for have the LCD always on. Thank you Quim


Return the control panel in order back to normal. ... Nikon D40x Digital Camera

Optio M20 Camera: Press on/off button to power up camera, the camera opens the lens cover, turns on a red led inside the lens, cycles the lens out and back in,then makes about 5 little popping noises. The back screen shows Pentax Optio screen for a second, then then the screen displays the word Auto Picture in the center of the screen and Green Mode at the bottom and at the same time it cycles the lens out and in. And for a brief moment in the back ground of the screen you can see the picture st


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

When I turn on my power shot sd 110 the monitor is dark and has red lines running through it. the menu displays when I hit that button.


Pls try to change the memory card it will work fine ... Canon Digital Cameras

I have a DSC-T10 and the screen does not display any of the menu features. It is has vertical lines across the screen. I would try to initialize it using the set-up menu but can't access it. It is not under warranty and costs to much to send it in for repair...any ideas of what I could try? I did try to reset by holding down the power button for 15 seconds while battery is out but nothing changed.


Hi,There could be 2 Reasons :-1. Bad CCD Sensor 2. \015\012Bad PanelTo Differentiate, Try to Look the Saved images or the \015\012Saved Video's. If you could see them without any Problem, CCD Sensor is \015\0 ... Sony Cyber-shot DSC-T10 Digital Camera

When powering up, "Sony" logo appears on display then display goes blank. Cannot power down (green light next to power button stays on after pressing power button. Thought battery needed replacement. Replaced with new battery - same problem. Purchased camera approx 1 year ago. Thx.


There is a firmware problem. The company will fix it for $50. It's fairly common now days with most cameras. ... Sony Cyber-shot DSC-H10/B Digital Camera

Dear taran_2005, Thanks for your reply to resolve the issue. After sending you my issue regarding Nikon Camera D80, I formated the card. All snaps were deleted as expecter. Display "No Memory Card? and status marked" LOCKED did not changed. I tried to take shots - I took over say 6 nos. The display "No Memory Card? and status marked" LOCKED remained as earlier. I got 3nos 2 GB cards, only one was formmated but could see no result change please. The camera is brand new. Upgrade fIrmaware may be a


Please make sure your memory card does not have the "Lock" setting clicked on. It is a small slider at the side of the card. Check this out and try to save again to your card. ... Nikon D80 Body Only Digital Camera

Lens stuck out No display No link to computer but will charge battery. Only way to power off is remove battery. Numerous key holds when power on result in no change. View lott's on FixYa. Try gentle but firm exercise of barrel, left right with success when some inward movement felt. Insert battery, power on, screen display yes, take picture yes [onboard memory as no SD installed for tests]. Will update if problem comes back. Gentle but firm is the key, good luck.


... Samsung HZ35W WB650 Digital Camera

My camera problem is :when i start or turn on the power button of camera a massage is displayed which is "Turn off the power and on again " i followed the same but again when i am turning the power on again ,same massage is being displayed in camera . camera model is :SONY DSC-W180 cyber shot please help me out soon.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W180 Digital Camera

Lost functionality Camera is about a year old. Suddenly, zoom doesn't work, Set button doesn't work and Display button doesn't work. Other than that, it takes pics and displays them. But without the Set button, I can't change settings. Any ideas?


I have the same problem.. happened after leaving it uncharged for more then a year. I think its a software problem.\015\012someone know how to do hard reset/reboot? ... Casio Exilim EX-Z750 Digital Camera

Just few days before I purchased Nikon P90. Earlier I used Sony H50. I am very disappointed with P90. Reasons are : i) The LCD display is very poor compressing with Sony H50. ii) Battery levels are not displayed unless the power is too low. iii) Picture quality not very satisfied. iv) If I take a close picture, the subject size is changed. (example, I take a close picture of my daughter for passport size picture, but my daughters' face is changed in picture). It is very pleasurable for me if


Have you tried going through the owner's manual and trying each thing in order? ... Nikon COOLPIX P90 Digital Camera

When powered on, the screen displays "Access". The scroll menu displays fine, and when a new option is selected the message will occasionally change to "Turn power off and on again".


If the unit is out of warranty then there are several diy fixes that may work. Note though that anything is possible and more damage is possible to be done when trying this method, obviously the ideal way is to have it serviced by a professional but ... Sony Cyber-shot DSC-W55 Digital Camera

Power Shot G2 camera is at date screen when you turn it on. I changed date battery and it will not let me change the date. Camera has only be used 3 times. The camera powers on and lens moves but it will not leave the date screen nor do any of the buttons work to advance the time and date.


I had a similar problem. I solved it by taking the rear cover off and reseating a ribbon cable that connects the switches to the main circuit board. This connector is hidden under a large plug in connector - also a large copper/plastic ground plane ... Canon PowerShot G2 Digital Camera

After deleting all files on the memory card, the screen will not change back when using the mode switch. The screen displays "no images" on both the view finder mode and monitor display mode. I've replaced the batteries and changed the memory card, but this did not resolve the problem.


The camera it is in the view mode and cause you deleted all the images on the camera during the transfer this is the reason ...first insert the camera..put it in the shooting mode...and not into the view picture...and in the menu ..look for sto ... Konica Minolta DiMAGE Z5 Digital Camera

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

Olympus ?-mini 5.0 Mpixel. Over last 6 - 9 months I have had intermittent appearance of error code D : 5EO2 on powering up together with camera cycling on-off several times during start-up before "settling down". Now, it cycles a few time then displays 5EO2 on blue screen. I have tried powering up/down a few times but with same result. Is it terminal??!!


Hi!!!i'ts some kind of cleaning or lose of connection to the pcbtry to open unscrew them but be carefulif you wish to open it the parts are too small!!!or call the for repair serviced ... Digital Cameras

I have a canon camera power shot Sx110 IS when I press the power on button, the led blinks and the lens does not open and after a while it goes off. When I try to review the pictures on it sometimes it opens and somtimes no. I changed the battaries 2 times with no change. Could you please help me on this issue. My email address is ([email protected]). Your help and support is really appreciated


Try the procedure in this tip. ... Digital Cameras

I have a sony cyber shot 6.0 mega pixels. Dsc-S600 camera. when i press the power button it lights up and the lens half comes out, but wont let me take pictures. When i press the power button to turn the camera off it doesn't do anything. I have changed the batteries but still does the same. How much will it cost to get fixed?


ACCESS ... Sony Cyber-shot DSC-S600 Digital Camera

Kodak M1093 The lens is stuck open and it will not power on. Blue power light comes on. There is no display. Battery is fully charged. I removed battery and SD card and pushed power button twice. Used on USB cable for power. Tried a different SD card. Same results. (lens is stuck open and it will not power on)


... Kodak EasyShare M1093 IS Digital Camera

I have a flip Ultra HD 2nd gen model: u2120B. I bought it off of eBay, broken. The buttons don't work. The camera is seen by the computer when plugged in. I can format the camera HD and reinstall the software. No change. When I turn the camera on, it goes directly into setup, prompting me to select a language (English). I push all of the buttons and nothing happens. The only button that does anything is the power button. I have taken other flip cameras apart and replaced the LCD, lens, res


... Digital Cameras

Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho


I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera

I bought a used T10, but when I power on, it displays the clock setting screen which in itself is normal, you're supposed to set the clock first but the screen is frozen; no button or combination of buttons does anything. Is there a general re-set button hidden somewhere or do you have any other suggestion. Thanks/Robert Hoppel


Helloit is not general setting problem, i think this is matter of battery, the battery may gone weak need replacment. otherwise it need to be handeled by Sony Service Center.Good Luck ... Sony Cyber-shot DSC-T10 Digital Camera

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!


You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1630 seconds