Having problems with your Digital Cameras ?

Nikon d1 occasionally on pressing shutter camera makes several rapid shutter movements top control panel shows err notice , then clears for a while and resumes taking pictures. Also D1 (another camera) Fresh battery card with capacity top control panel is showing card full notice and will not operate.Monitor will not light or show any images. Thankyou


Answers :

You can customize shutter through the dial mode...

The D1 can be operated in single-frame or continuous shooting mode,self-timer mode,playback mode and PC mode...

To set the operating mode, hold the mode dial lock button down and turn the mode dial to desired setting.

Modes available:
(S) single frame shooting: one photograph is taken each time shutter-release is pressed, The next photograph can not be taken until the current photo has been saved to the flash memory card and the card access lamp has gone out.

(C) continuous shooting mode: Photographs are taken at a maximum rate pf 4.5 frames per second while the shutter is held down. Photos are stored in a temporary memory buffer,which can hold a maximum of 21 photos. When this limit is reached. The camera will be unable to record more photos until at least one of the images in the buffer has been transferred to the memory card.

in the event that the D1`s battery gets exhausted while taking pictures in the continuous mode the camera will stop shooting,
save images held in the temporary buffer to the memory card and turn off....

for more info visit this link:

http://people.csail.mit.edu/tbuehler/video/D1_manual.pdf


Thanks!


The shutter switch seem to be loosely connected.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Nikon d1 occasionally on pressing shutter camera makes several rapid shutter movements top control panel shows err notice , then clears for a while and resumes taking pictures. Also D1 (another camera) Fresh battery card with capacity top control panel is showing card full notice and will not operate.Monitor will not light or show any images. Thankyou


You can customize shutter through the dial mode...The D1 can be operated in single-frame or continuous shooting mode,self-timer mode,playback mode and PC mode...To set the operating mode, hold the mode dial lock button down an ... Digital Cameras

Unable to show the menu, the top screen does not show any number of pictures to take it only shows the brackets i have a 1gb memory card in. When i turn the camera on the shutter speed and f stop and other info appear but have noticed that the clock and the battery symbol flash for a short period and then the f stop and the shutter speed disappear but other info stays. I have replaced with a new battery but still have the same problem could there be a problem with the memory card. Thanks John Fo


It is possible that the small built in back-up battery is failing or has failed. This battery is built in and recharged by the main camera battery, three (3) days of charging will recharge it and it should last for approx one (1) month. For more deta ... Nikon D50 Digital Camera

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!


You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera

Nikon d80 - most of the time memory card access lamp flashes and shutter release button doesn't trigger shutter. Sometimes it will stop blinking and camera will fire. Sometimes when it fires it will not show a preview image. When malfunctioning I can not bring up menu screen or access any features (shutter speed, f-top, or review screen. Have tried different memory cards, and lenses with no change.


Hi pantha. Turn it on and go into the menu and find the reset function. Reset it. This will merely set it at all of the parameters it was set at in the factory. IF this reset does not solve ALL of the problems, then you will have to take it or sh ... Nikon D80 Digital Camera with 18-135mm Lens

Bought in 2005 and have enjoyed its marvelous pictures. I put new batteries in, checked the ''all but empty card'' by seeing if it would download to computer; it did, no problem there. But, when I turn on the camera today the image in the camera's LCD shows what it sees with a quarter inch white bar at the top and flickers with a slow roll of the image viewed. The colors are also slightly off. I do not remember dropping the camera. I noticed that the screw plate on the bottom edge had one


If it is Canon A75 camera then its known problem of bad ccd iamger and canon will repair it free of cost.Click ... Canon PowerShot A75 Digital Camera

My Canon 5D mkI turns on ok, will focus, displays top and back, but it will not take a shot. I have two batteries, both which I have charged to full and tried (display shows full charge). I have also tried two seperate CF cards. I have tried cleaning all contacts. Still it won't take a photo. The shutter will work when I use the "clean sensor" function though. Also, I have reset all settings on the camera. Anyone know why the camera isn't firing off a shot?


Hicould you tell me the amount of shot number when you put memory card in? If yes, please move to manual position from auto on the side of lens. And try to press release button.there is other one thing you have to chack selftime release working or n ... Canon EOS-5D Digital Camera

I have a Nikon D80... a year old. The following functions/buttons stopped working for no apparent reason in the same time frame. - holding the delete and metering mode buttons together to format memory card. (however the buttons independently work fine) - holding the WB button (set to PRE) to set preset white balance. - when camera is on... turning the power switch to the "bulb" symbol to illuminate the control panel on top of camera not working. thank you for any help you can off


You have the latest firmware installed already and you said you updated again just to be sure.Certain button combinations that used to work don't and the buttons work independently.Sounds to me like the BIOS chip itself is cor ... Nikon D80 Digital Camera with 18-135mm Lens

I have a Nikon D3 and the main command dial will not change shutter speed. It will change info in the rear control panel but not the shutter speed in the top panel.


... Nikon D3 Digital Camera

When taking photos with the camera set at the shutter priority, all the photos come out black. I have a lens with a f/2.8, but the on the screen on top the camera, the f reading is showing LO. I have taking photos for the last three weeks off our high school football games with the camera set up in shutter priority, iso at 1250 and my f/2.8. now for some reason the f reading is showing LO and all photos are black.


You mention everything except the shutter speed. When the aperture shows "Lo" it's saying that there isn't enough light at your selected shutters peed to produce a good exposure. That's why you have dark photos. You may need to bump the ISO up hi ... Nikon D300 Body Only Digital Camera

When the screen shows a notice that the internal memory is full, how do I transfer what must have been taken on the internal memory but is not on the card. I opened it to find that the memory card was not fully in place. After securing, the camera worked fine, but what happened to the pics taken before the notice which dont show in review funct?


Hi,You need to copy picture from internal memory to memory card.Below procedure is for Sony DSC-W50Insert memory card in camera, press Menu, go to Copy and select yes, okFiles in internal memory will start copying in memory ca ... Sony Cyber-shot DSC-W50 Digital Camera

Hi I have a Nikon Coolpix S8200 ,it has a ((hand symbol )) and a yellow camera icon top left corner .Pls help I have never dropped camera or misused it,all I remember it gave a msg of the sd card error and since I have been using the sam card I just popped out the card and put it right back in slot .It does everything zooms in and out ,shows old pics in review but will take blank pics and recordings pls help Ijust bought this camera six months back from Best Buy


... Nikon Coolpix L1 Digital Camera

Hi, my name is Mathew I have a sony cybershot digital camera, when i switch on the camera, it shows as format error and a memory card like picture keeps blinking on the top right side of the screen, but when the memory card is taken out, the camera seems to be working fine. Can u please tell me if the memory card is corrupted, if so is there any possible way to rectify it and collect the data from it? Thanks.


You need to format the card in the camera. This will erase it so download any pictures first using a card reader if necessary. ... Sony Cyber-shot DSC-W100 Digital Camera

My cannon a 530 says that it has a memmory card error, and it shows memmory card locked momentarally at bottom of screen, i tried to unlock with the slide on the card itself, but that did not help. i put a new memmory card in and it shows the same. i also noticed a watch type battery next to the aa batteries, could that battery be the problem ? i have never changed that battery and this camera is several years old.


No that's not likely the problem. The new card is probably the issue, especially if it is 4GB or higher. There are several possible causes for "memory card locked", "memory card error", or "no memory card". Some include trying to use of a 4GB SDHC c ... Canon PowerShot A530 Digital Camera

Hi, the flash card card-eject lever spring is broken and wont eject the card. u have to manually push the card in place and pull the card out. the lever stays up until u shut the card slot door.once the card is in place the camera can read the card if images already exist. but...it will not record an image and shows up as blank on the screen after the shutter takes the image? is this the cause of the broken eject lever. thanks.


I have the same problemI think that the reason that the not record the image is that the card slot door is pushing down on the card eject lever and ejecting the card when the door is closedThe only answer I can think of is to shorten the leverdavidh ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

After 3 years suddenly some photos will not show up on the card. When you review the in the camera, they're gone! Most of them will load into iPhoto but I noticed a few missing still. My guess is I need a new card, but was wondering if the camera is getting quirky as it is used a lot.


Best practice is NOT to store photos on your memory card, but to transfer them to your computer and to format (some cameras call it "initialize") your memory card before every use. This practice helps prevent bad spots or file errors on the card fro ... HP Photosmart R927 Digital Camera

I cannot for the life of me figure out how to install the batteries on my digital camera. It is a: Vivitar ViviCam 7028 The easy guide has an image of the batteries going into an area accessed by opening an L-shaped piece of plastic paneling. The image shows the paneling coming out and away from the camera. Using the imagery of an L-shape it hinges at the top of the "L" The easy guide does not describe HOW this is suppose to be accomplished. There is no lock that is visible, and rela


Just push and slide away from the camera? ... Vivitar V7028 Digital Camera

Canon rebel xsi dropped screen is black photos don't register on card camera functions seem to work...menu shows up buttons work lcd shows settings when camera is turned on but when I depress the shutter a screen comes up black with 1/60 10 100/1898 any suggestions? Thank you.


You may have to send that to a repair centre as dropping digital camera's often shake electronic parts out of place inside. you should try removing the digital card and reinstalling it to see if that helps at all. ... Canon EOS Rebel XSi Digital Camera

Any time I connect the usb cable camera to computer, the notice: "New hardware found.." appear on screen. After install, some times the computer freezes but mostly nothig happens: No camera, no usb disk (from My PC), nothing. At Control Panel-> System-> Hardware says USB Still Digital Camera with interrogation mark. When I try to reinstall the driver, the program don't find ANY driver, even at Camera intallation CD or at folder with the downloaded driver from Digital Blue. At the little screen o


Please get it here :\012www.drivershq.com/driver-update/digital-camera/disney/\012\012\012Regards, ... Disney Pix Micro Digital Camera

My Canon Powershot A460 shows Card Locked. The card switch is in the unlocked position. I have another camera. the card works in it. But the card from that camera also shows as Locked in the A460. I have tried the turn camera off and remove card, then turn camera on, then turn camera off and insert card. Both cards still shows Card Locked in the A460 and both work in the other camera


There is a lock lever inside the card slot. You could try to move it with something like a toothpick. ... Digital Cameras

I bought a new xd memory card for my finepix A120 camera but when i started to take the snaps it is showing card not initialized. What is the problem. Memory card capacity is 1 GB.


You must go to menu and select format card, this should resolve the issue. ... Fuji FinePix A120 Digital Camera

Connecting problem After connecting the USB cable to the computer and the button is pressed, it says: connecting to computer, but it doesn't happen. The green light on the camera blinks and repeats blinking, but nothing happens. Using Vista and initially, the spinning circle appears but nothing happens. Used installation disc but it does not download, in that when we go to cameras & printers on our control panel, the printer shows, but the camera doesn't. We were able to download pictures at one


... Samsung Digimax D53 Digital Camera

Trying to connect my dimage z1 to Acer computer, won't open automatically like it does on my other computer. Can you help. When in control panel of programs it is showing as working but I can't see it. On camera showing usb connection and also when usb connected to computer little green usb sign showing at bottome of compter


HI,The autoplay feature is turned off.So to enable it please do the following.FOR WINXP:\015\012\015\012Double click on the My Computer icon on your Desktop until it opens.\015\012\015\012 ... Digital Cameras

I have a Nikon D80. Whilst at Yosemite National Park a few weeks ago, where it was extremely cold I noticed that my camera would not take photo. After a few tries, it started working fine again. However, yesterday the shutter started sticking, and the ERR message showed on the screen. Then I can take one photo, and same thing happens again. Is there something I can do with settings, or do you think there may be something wrong with the camera body? I took to a camera shop and they say the


Changes in temperature should not affect it unless its about 15 below or at above 55-60C Then there is some delay in taking the picture due to shrinkage in metal part causing lt to be sluggish or in heat to expand the metal and cause some slight ... Nikon D80 Digital Camera with 18-135mm Lens

I have Chronos SP-5110 Digital Camera. Installing drivers that came with it on Win XP went oK. However, Scanners & Cameras option in Control Panel shows the camera as unvailable. Tried downloading some other driver also for this model. But that also did nothelp


... Digital Cameras

The problem in my digital camera is whenever I ON the camera, It shows Memory card requires formatting, and If I give Continue, It shows Formatting will delete everything on memory card I give Continue.......Its shows Memory card is unusable(insert new Memory card). And if I put a new Memory card it again shows the same message........So what would be the problem either it's the camera, and may not be memory card. Please suggest me what to do next...... awaiting for your reply


Preformat : By Fix-shad0w#1Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com#2Open up 'My Computer'. You should ... Kodak EasyShare V1003 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5376 seconds