Having problems with your Digital Cameras ?

The lcd monitor is not showing any image - Digital Cameras


Answers :

Do you also have a viewfinder? Sometimes I forget to push the little switch on my camera to go back to the LCD screen. Otherwise, please supply more info. When did this happen. Under what circumstances. Will the camera take a picture?
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

LCD monitor does not light up, and consequently, does not display any image (as some other digital cameras do) during the aiming and focusing processes - sort of prescanning the image - before the shutter is half-way then fully pressed. In other words, is the LCD monitor designed soley to display image review (playback) and show menues!


Actually the reason is due to the way an SLR works. The shutter doesn't open up to the CCD device (the digital equivalent of the film) until you press the shutter release button to take the shot. Until then, an angled mirror points the viewed image u ... Canon Rebel XT / EOS 350D Digital Camera

The lcd monitor is not showing any image - Digital Cameras


Do you also have a viewfinder? Sometimes I forget to push the little switch on my camera to go back to the LCD screen. Otherwise, please supply more info. When did this happen. Under what circumstances. Will the camera take a picture? ... Digital Cameras

When I turn the camera on, the image that I am shooting does not show on the LCD monitor. When I switch the camera mode to view images I have taken previously, they show up but the new images are not showing (they are completely black) Can you help?


There are many point you may want to look at.\015\012\015\012first, if the LCD does not display the picture you just capture, there is a possibility that the digital module of the device is broken and that it does not show or save the pic ... Digital Cameras

Image does not appear in the LCD Monitor when camera is turned on? Monitor will show a flashing streak. Once in a while an image will appear. Batteries are okay. Camera not Dropped! Frank


This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot A75 Digital Camera

Canon Powershot A610 digital camera--LCD screen shows icons, but otherwise is blank--there is no visible movement in the lens when I take a picture without flash--have tried setting it on TV setting and taking a picture, then opening the battery cover for a few seconds after waiting 7 seconds or so, but no images on the LCD except the camera's icons--ideas? probably a stuck shutter, or is it still possibly the CCD sensor even though there's no visible movement in the lens? Ideas? Thanks!


Much more likely that it's a stuck shutter, especially for your model camera. How many tries did you give the fix? Some people stated that it took at least 15 repeated tries before the shutter opened:\015\012\015\012\015\012 ... Canon PowerShot A610 Digital Camera

Finepix A800 The LCD Monitor has a frozen skewed kalidoscope type image on it. It is impossible for me to remove it or to get anything brought up such as the menu, or to view the couple of hundreds of pictures that I have taken on it. It is possible, still, to load the pictures from the camera to the computer, but that is all that I can do. I cannot manually delete any of the pictures from the camera, since nothing shows up on the monitor except for that frozen weird design. It will still take p


I have had the same problem with my F-700After calling Fujifilm Custom support here in Spain, I've noticed that camera series had a common failure at CCD SENSOR, NOT THE SCREEN.IF THE PROBLEM IS CCD (IMAGE SENSOR) FUJIFILM ... Fuji FinePix F700 Digital Camera

Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig


That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera

Digital camera LCD monitor not working properlly


You might try pushing the DISP button with the unit in camera mode with the LCD open. ... Digital Cameras

No images I took a whole day of pictures with my Nikon D70s camera. My fist picture came out fine, the rest i cannot get the image when viewing on my computer. When I took the pictures they all showed up on the lcd monitor on the back, but everything says no image. the files say jpg file,or dqc file. Are there any pictures in these? thank you


Look in Explorer at the .jpg files on your card to make sure they have information in each file.\015\012\015\012Next, make sure your software is set to view .jpg files,i.e. Faststone Image viewer (download.com) can be set for virtually any image form ... Nikon D70s Digital Camera

When I transfer photos from my Canon digital camera SX10 IS to the computer monitor through the card reader all goes well EXCEPT that when I remove the card from the reader and re-insert it in the camera, the screen on the camera back shows the wording "NO IMAGE". This never happened to me before. What am I doing wrong please? Many thanks for helping an oldage pensioner still baffled with computer navigation.


Hello!I might have understood you incorrectly, but if I do - the NO IMAGE message tells you that there are currently no photos on the memory card. The way I see it (please correct me if I'm wrong), when connecting the memory card to ... Canon Digital Cameras

I have a Kodak Easy Share Model C 653 (6.1 MP) digital camera. It worked fine until today, when the LCD screen showed nothing but a distorted image. What's the problem? I am a clergyman, with 3 master's degrees, but none in digital photography. Please use non-tech language.


The tech support person, Hemantraj, asked good questions, and determined that the camera needed a CCD imager circuit replacement. He suggested that I contact Kodak directly about repair. I did, and have mailed the camera to Kodak for repair.Tha ... Digital Cameras

My daughter's Sanyo VPC S1070 digital camera shows a Lens error code: 0x15110000. I've tried to look at/download pictures and it won't do that either. It has 10.o megapixels and was purchased at Christmas. The lenscover doesn't open either and no images show on the LCD screen. I won't say powered on for more than a second, just long enough to flash the message.


We have the same problem with our sanyo...does anyone know the manufacturers number...walmart would not take it back cause we threw away the box..so we are stuck with a camera that does not work and spent alot of money on it. any suggestions??? ... Digital Cameras

Camera shows no image through the viewfinder or on the lcd screen.pressing shutter button will actuate the camera, but only image is of a black box.using the display button to turn off the lcd does not help. the information icons show both in the viewfinder and on the lcd. camera has not been subjected to any abuse of any kind. has not been used for about 2 months


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot S3 IS Digital Camera

In camera mode, screen shows a blend of image and digital spectrum analyzer bars blurring the image


The ony way is to get the CCD replaced with a new one. Contact NIKON for free replacement as this comes under manufacturing defect. ... Nikon Coolpix 5700 Digital Camera

Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.


Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera

Lcd shows menu but not live image - Canon Rebel XT / EOS 350D Digital Camera


You have to go into the setup menus to enable LIVE VIEW. After that you can simply press the SET button to get live view. You can't set it to work without pressing SET ... Canon Rebel XT / EOS 350D Digital Camera

Digital camera wont show me the image on the lcd screen at all cant see waht im shooting and its all dark


See Canon's service notice posted here. If your camera model is li ... Canon Digital Cameras

LCD screen shows an odd image that looks like digital noise, regardless of setting or task being performed (high red content). Camera opperates normally.


The screen is probably damaged and needs to be replaced. ... Sony Alpha DSLR-A300 Digital Camera

LCD monitor cracked and no picture shows. - Konica Minolta DiMAGE X50 Digital Camera


This is a very common problem. The LCD is broken, and will need replacement. Sometimes you can find them on ebay for $25 up, and replace it yourself, if you're mechanically skilled. I had one like that, and a local camera shop wanted $125 to ... Konica Minolta DiMAGE X50 Digital Camera

I have a Canon Power Shot A75 3.2 mega pixels. LCD Monitor does not work. Screen shows current settings. When trying to take photo's, flash and all indicator lights work. Camera does not record image on CF card.


... Digital Cameras

No image on LCD monitor - Canon EOS 30D Body Only Digital Camera


Hi,Please note that your camera must be experiencing these symptoms due to a faulty CCD, and not due to other problems. Replacement with a new CCD will fix this problem for sure. ... Canon EOS 30D Body Only Digital Camera

Rebel xt lcd monitor wont show the pic taken - Canon Rebel XT / EOS 350D Digital Camera


Hello. The first thing I want you to do is go into your menu and find reset. Click on that and it will take you back to the factory settings. If that does not solve your problem Angie, we will have to send your camera into Canon as opening it up w ... Canon Rebel XT / EOS 350D Digital Camera

Power shot a 75 LCD monitor shows no desplay - Canon Digital Cameras


This the problem with camera hardware and this what canon says about this product hope this information will help:\015\012Important Notice About Your Canon Product:\015\012 It has\015\012recently come to our attention that the vendor-sup ... Canon Digital Cameras

Sinpo sx-410z3 digital camera not showing image through lcd


... Digital Cameras

I turned my digital camera on and the LCD screen is showing the image upside down and backwards.


The auto rotate sensor is going bad. Look in your camera's menus for a selection to turn autorotate off. Actually going inside the camera and fixing the sensor is possible for those with some electronics background, but really not worth the risk of ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3828 seconds