Having problems with your Digital Cameras ?

I cannot change the code of my scorpion z6 alarm

\015 I bought a new house but i cannot reset the alarm code. The owner had give me a code. I followed the instruction of the manual. but i never get a two beep to signal successfully change in password. it is always one beep :( can you help me to reset please? Thank you.\015

Answers :

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I cannot change the code of my scorpion z6 alarm


... Digital Cameras

I have copied and pasted someone elses problem, because it is the same one I am having. So if I want to use the aperture for taking Manual photos I cannot do this because when it goes off of F22, it reads FEE, error. "I have nikon d80 with the fEE error code blinking... I know this means that the aperture is not locked at the 22 but it will not allow me to change the aperture settings. Please help us!!!"


Lock the aperture ring at its smallest opening (in this case, F22). Change the aperture setting by turning the subcommand dial (the one in front, unless you changed it in the setup menu).Of course, you can only change the aperture directl ... Nikon D80 Digital Camera with 28-80mm Lens

I cannot get the phone to tell me the iemi code???? Tryed typing in *#06# and send and it dials a call it cannot complete. I took out the battery to try to read a code but to no avail. Help Please


Try #06# with out the star ... Digital Cameras

Camera fufifilmF40fd connects to computer but computer cannot access pictures -Device manager Code 19 says cannot start this hardware device because its configuration information in the registry is incomplete or damaged, could not load driver software. It says when i check the driver that the best software driver is installed and up to date. problem code 00000013 date 21.6.06, 6.0.6001.18000. Any solutions?


Two things need to be done :\015\012\015\0121. Uninstall all the drivers of your camera installed by windows, from the device manager. After doing that use a registry defragmenting software to rectify the errors in the registry. ... Digital Cameras

Hi I have a Canon PowerShot A460 and normally do notn have any problems at all. For the last few hours I cannot take any photos outside - all I get is a white screen. I can however take photos inside with the Flash. I realise that I have possibly changed some settings by mistake and have tried to set the camera to works settings but nothing has changed - I still cannot take photos. Can someone help me please??


Go into the menu and find "reset"...this will restore the original factory default settings and may solve your problem. ... Canon PowerShot A460 Digital Camera

December 31/09. I moved from the MST zone to the PST zone. On the atomic clock I moved the button to change the zone. The clock seemed to work as it should for about 10 days. It is now late December and suddenly the date changed to the new year about December 26. December 30, I decided to change the batteries. The date changed to Tues Jan 1, with the time completely out of whack. Temperature seems accurate but I cannot figure out how to change the date and time. It has date and time butto


You can get the manual on link below. You need model # though.\015\012\015\012\015\012http://www.skyscan.info/content/manuals.html ... Sharp Digital Cameras

I have a 256MB SD memory card (SanDisk). The case has split and my camera and my computer cannot read the card. Is there anything I can do? My Samsung L201 Camera and other cameras cannot read the my SanDisk Memory Card (256 MB). It all started when the memory card went full and I changed it and used a 2 GB SanDisk instead. When I put it in my camera again, the card cannot be read. It asked if I wanted to format it but my files would be deleted. I put it in my laptop and the laptop cannot rea


Try to check your memory card with at least 5 different computers. if they have card readers much better. memory cards have to be given at least 8MB for processing. It may have been used up even the space for processing. If haven't save the files ... Samsung L200 Digital Camera

Cannot zoom; cannot push menu button and access other shooting modes; cannot push '>' button and review taken pictures. basically, it will not allow me to change anything via buttons on rear of camera.


Has this camera encountered any water or moisture? Sounds like the Ribbon cable to theoption panel is either loose or has been compromised. It could have come loose after a drop or hit, compromised cables are results of water damage or ... Nikon COOLPIX S610c Digital Camera

We have just got a Wii and the kids have changed something so when we go back to the DVD it plays with the people looking green. I think they have changed the cords connecting into the TV. They say they never actually touched the DVD player. There are five cords - red, yellow, white then a green and blue. When you move the blue one it changes it all to black and white. Most are colour coded to the same colour as the plugs on the tv.


... Fuji FinePix F700 Digital Camera

Change languagege Inavertingly changed language,cannot understand how to change back to english


Press MENU, then use left/right to select the Setup tab on the right. Language should be the eighth item on this menu. Select it, and you should see "English" as one of the choices. ... Kodak EasyShare C142 Digital Camera

I have an error code on my Sony Handycam SDR-12 HDD. The code is E31:00. The manual says I cannot fix the problem. Do you know what the problem might be? It started as a format disk error. I reformatted the Hard Drive. The camera recorded fine, but the error code is still flashing.


... Digital Cameras

I have a Sony Cyber-shot DSC-W90. When I try to change the flash settings, a notification pops up on the screen saying, "Flash settings cannot be changed." I tried setting it in each mode (including Auto) and trying to change the flash from there, but it won't let me. How do you unlock the flash settings? Thank you.


Go to Menu/ Home and initialize camera to reset it for factory default settings to fix flash light settings bug.If problem still not solved, let me know do you see any error code flashing in top right corner of lcd? ... Sony Cyber-shot DSC-W90 Digital Camera

My date is set wrong and I want to change it. I can change it on or off but cannot figure out how to change the actual date. Please help.


These are extracts from the manual:-"To better understand each menu option, use camera Help-highlight a menu choice, then press the Telephoto (T) button." but here is the menu button:- ... Kodak EasyShare M1033 Digital Camera

E code We are getting this code on our camera E:61:00. I cannot find the manual and need to know what this code is.


Yes it a focus error and can only be solved by replacing the lens(held in by just one screw)\015\012I have had success by buying a 2nd hand camera for parts ... Sony Mavica MVC-FD200 Digital Camera

I cannot change the ink. The containers slide to the left and the go back to the left with great speed. I cannot make a photo copy either can any one come to fix the problem?


You seem to be having several problems at the same time, it is advised that you review the user manual of the printer. I don't know of anyone that makes service calls for this type of problem except COMPUTER GEEKS and the service call will be quite e ... Digital Cameras

Camera problems I can see the different setting symbols on the screen and when I turn it off and on I can see the canon pic it shows upon coming on. However, when I take a pictures I can no longer see the picture I am taken on the screen and although it appears to have taken the picture the picture turned out black. This starting taking place after my husband changed my settings I cannot figure out what to do to change it back. Please help.


This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot A85 Digital Camera

Nikon 8700 I let someone borrow my camera, and like someone else that posted, I'm getting a lens error when I power it up. Everything physically appears fine, and it turns on, the lens comes out, and I can view photos on the camera, but I cannot shoot a picture. I tried someones suggestion of leaving the batteries out over night, but no change, and I cannot find anyone who knows how to repair this camera local. any help?


I had a Lens ERR a year ago and after a while it started working again on it's own... that error means that something (dust particle, etc) is stuck in the lens; you can try to clean it with a brush or blower; or take it to a repair shop... it's a pre ... Nikon Coolpix 8800 Digital Camera

Trying to change flash settings but says 'flash settings cannot be changed' with a warning triangle. I am in the 'Green Camera' setting on the dial on top


Hello. I have a solution for you. You have your camera set to "burst" mode, which does not use flash. Reset it to "single" mode and you will be able to change the flash settings. Regards, Joe. PS Please rate my answer. Thanks. ... Sony Cybershot DSC-H3 Digital Camera

A friend had stored some pictures on her PC but had deleted them from her Panasonic Lumix compact camera. She wanted me to copy them back to the camera card. Some copied okay but others cannot be viewed on the camera (they just show up as blank (black) images). Panasonic support suggested this was because she had rotated them in Windows. I tried reversing this and changing orientation attribute values and managed to get a few more copied but some jpegs just cannot be viewed despite trying every


Look it happens without any explanation you cannot correct this it may be a file system error camera is very specific in these terms and sometimes do not read pics if u copy them back , i will suggest not to go deep inside this problem because number ... Panasonic Digital Cameras

Zoom lens cannot go in. camera cannot be turn on with new battery. after turning on the camera, the lens comes out. however, the camera does not turn on. after changing new battery, nothing happens after pressing on/off button.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Casio QV-R51 Digital Camera

Flash unit will not open or work in any mode except "easy". If you try to change flash setting with control button, you get message that "flash settings cannot be changed"


You may have accidentally hit the BRK button next to the shot button. this turns on bracketing and locks out flash changes. Hit this button again to turn off bracketing ... Sony Cyber-shot DSC-H50 Digital Camera

Cannot find the resolution setting . my photos are not clear when i print them large. i have been told to change the resolution setting but i cannot find it on the sony cybershot dcs-t20 camera


Make sure you set your camera at 8M when you take pictures, however when you do this you will not be able to store as many pics on your memory stick, The higher the resolution the clearer and larger you can print. If your Camera is set at 3M then whe ... Sony Cyber-shot DSC-T20 Digital Camera

Battery change Sony Cyber shot DSC W55 I am getting a 'battery dead ' signal and cannot find where to change the AA batteries Sorry I have mislaid the manual and feel very silly.


u can download manual for ur came ... Sony Cyber-shot DSC-W55 Digital Camera

My Pentax Optio M20, which is just out of the guarantee period has developed a nearly total shut down. I cannot get any of the functions. I have changed the batteries but that is alli have done.The zoom lens will open but will not close instantly and i cannot get into the memory.l


Hi there,It seems that there was a mechanical problem on your camera thats why it will not function properly and the lens arenot able to retract fully. better to send it into a nearest Pentax servcce center to fully check the unit. ... Pentax Digital Cameras

My manual program does not work; it's as if the program was stuck on "user". I cannot change the aperture, the speed goes up only to 250 and the exposure bar is not visible. I don't know what happened, since I did not change my settings since last use.I use Pentax K10D.


... Pentax K10D Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0888 seconds