Having problems with your Digital Cameras ?

On my Finepix S9500 when I select programmed aperture or shutter priority when I go to select the speed or aperture I am unable to change the aperture or shutter speed, or in fact the ISO setting. The camera seems to work well in automatic mode but I am unable to do any creative work because I can't overide the autp mode. Help!!

Answers :

Sorry, not a solution but wondfered if you ever solved this because I cannot work it out!
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

On my Finepix S9500 when I select programmed aperture or shutter priority when I go to select the speed or aperture I am unable to change the aperture or shutter speed, or in fact the ISO setting. The camera seems to work well in automatic mode but I am unable to do any creative work because I can't overide the autp mode. Help!!

Sorry, not a solution but wondfered if you ever solved this because I cannot work it out! ... Digital Cameras

Shutter speed I'm trying to work out the mode which gives the shutter speed of 1/1500 I think it's the 'sports' mode but unsure if aperture will also need adjusting Is this right? If not how do I achieve fastest shutter sped? Thanks

On most fuji cameras the programmed shutter speed for the sports or action mode is 1/1600. This is the mode you need to use. You should not have to change the aperature unless you have a problem with the light. This is the most difficult shot to make ... Fuji FinePix S3500 Digital Camera

Using my Canon XSi/450D, I'm interested in doing High Dynamic Range photography. But I can't discover how to make the automated shutter-speed range multi-shot (3 for the 450D) AEB work. I've gone into the menu and select and change the AEB range ( -2V) and pressed "set." Working from the "AV" in creative mode, I then set up my first shot with focus and ISO, and shoot. Now what? When I press the shoot button, an ordinary photo is captured, and if I continue to press the button additional cap

Click on this link http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=139&mod ... Canon Digital Cameras

Suddenly I can't control the aperture with the sub command dial in the manual mode. I have tried a "hard reset" and the two button reset to factory defaults. In M,A and S modes the shutter and aperture values will disappear and only return after a two button reset.I can adjust the aperture in A mode with the command dial.The shutter speed is adjustable in M mode with the command dial.

In Manual mode only the front dial can be used to set the aperture. That is probably In Aperture mode you can only choose the the Aperture. Shutter speed is automatically chosen. That is why the shutter speed value will disappear.In Shutt ... Nikon D80 Body Only Digital Camera

I have a nikon d200. The last time I used it (only a few days ago) it was fine, everything normal. Then yesterday I pull out out of the case and everything seems to be going wrong. It is metering INSANELY low, like a shutter speed of 100 in full daylight produces a REALLY dark image. It won't auto focus at all, and i am unable to change the fstop in manual or aperture priority modes. I tried to restore it to factory settings and the lcd screen flashed to indicate it had been restored but no luck

Your boyfriend is probably right, and it makes sense, if you can't change the f-stops. \015\012The following blog on Flickr might help you:\015\012 ... Nikon D200 Body Only Digital Camera

Hi i am using a Nikon N75 to take pictures for my photo class, and the instructor wants us to take low light indoor phtotos at a shutter speed of 1/30 at f2.2. However, when i go to set these settings in manual mode the camera will not let me set my aperture to 2.2 it usually stops at 4 and there is no way i can make it 2.2. i didn't know if there is a limitation on the camera but it seems like i should be able to select what i want.

It's probably a limitation of your lens. You didn't say what lens you're using, but one of the common kit lenses sold with the N75 only goes to f/3.3 at best. If you had a lens that opens up more, the camera will let you use it.The differ ... Nikon Digital Cameras

My scroll button is not working..Camera - sony hx100v..i could able to select it by clicking but couldnt able to change the values (shutter speed , iso , aperture)

... Sony Cyber-Shot DSC-HX100V Digital Camera

Nikon D80 with a Sigma Lens (80 to 200 I think). In manual mode, often shutter won't release - this was a close up of a hummingbird with a fast shutter speed. Internal light meter showed underexposed, but the background was dark green. Initially, the shutter released, but later would not operate either with a remote, or by manually depressed the shutter release button. Switching back to auto, the camera seemed to work fine, but in this mode could not get the desired shutter speed. In full manual

In full manual, yes it should. ... Digital Cameras

The mode dial doesn't seem to work. The camera is stuck on the high speed sequential setting. When we select iauto, it takes one picture and then freezes. When we select the camera option on the mode dial, it takes 13-15 pictures in succession and then freezes. The pictures are taken without the button being pressed. We need to power off to change modes. The camera did work for a little while.

Base from the description of your problem what we can do here first to correct the problem is to reset or restore the camera settings to its default from the camera MENU. Then once you done that check if its working fine now. ... Olympus Digital Cameras

External Flash I set my Epson 3100z camera to manual mode and set up the camera for external flash. I manually set the shutter speed to 1/60 sec and the aperture to F4. I also set my SunPak flash to F4. My exposures seem pretty good. However when I review the various photo info's, the aperture reading is F5 or F4.8 not the F4 I set. Why is this? Anyone experienced this? The shutter speed are also not always what I set on the camera.

Be carefore that the stopping-down of aperture due to zooming to tele-photo. Flash compensation may be needed. \015\012 ... Epson PhotoPC 3100Z Digital Camera

D90 flash I just bought a new Nikon D90 and I was on a shoot and the built in flash popped up (in bright sun in manual mode) and I cannot get it to stay down. the camera will work but only to 200 shutter speed. if I hold the flash down then it will work at all shutter speeds. Any Ideas on how to get the flash to go down?

I have just fixed this problem on my D90. Go to http://dieselpic.wordpress.com/2010/07/14/d90-flash-wont-stay-down-how-to-fix/ to see how I did it. ... Nikon D90 Digital Camera with 18-105mm lens

Shutter speed I cannot remember the aperture, but when I try to take a picture of the moon with my FZ20, even @ 2.8 aperture, I certainly do not have 1/100s shutter speed, but more like 1/10 or even less (P mode). I wonder if there is a problem with my camera ? How can I check that it is correct ? Can someone with experience of moon shot give me some "standard" shutter/aperture so I can compare ?

Rule of thumb I read was f11 and then 1/ISO for shutter speed. This means that if you're using ISO 100, you use 1/100. ISO 80, then 1/80. White balance set to SUN (because moon is reflecting sunlight).\015\012\015\012Wait! My camera doesn't do f11!!! ... Panasonic Lumix DMC-FZ20 Digital Camera

Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t

I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens

Hi. I am on vacation in the Indian Ocean islands at this moment with a brand new Nikon D90 + 18-105 lens. Was taking photos this morning. From one shot to another, the camera suddenly stopped working. When I press the shutter button, it still focuses and when I click through, I can hear the shutter clicking (tried this with different shutter speeds). However, no photo is captured/stored. Also, the Lv button no longer works. When I press it, the camera is unable to switch from viewfinder to LCD l

If you happen to have a hair dryer with you please use it to take off possible moisture from the camera, warm the camera and keep repeating it , do not over use but just to make sure that exposure to mist could have caused condensation within.\ ... Nikon D90 Digital Camera with 18-105mm lens

I am unable to get the shutter speed above 1/60 on our D200. It was working fine. Is there some setting in the camera that would limit shutter speed even with flash?

The flash is probably what's limiting your shutter speed. All cameras have a maximum shutter speed that syncronizes with the flash. ... Nikon Digital Cameras

Hi there, I have a nikon D50 camera and the inbuilt flash unit does not work any more.... it pops up in dark conditions bu tthen fails to fire. The camera will adjust the shutter speed as if the flash was turned off, and the flash doesn't work in any flash mode or any function mode. Could it be the bulb perhaps? I have reset the camera as well to no avail. please help! thanks :)

Hello, and welcome to Fixya.. This is a very common and known issue with the D50 camera by Nikon. Some buyers flash only works once and then quits. Its due to the speed of which the flash pops up, it literally breaks ... Digital Cameras

Canon Rebel XT I can't change aperture or shutter speed in manual mode

You may try this. Reset all in the menu setup.What you will be doing to to reset all the settings back to factory settings. Then you will want to go through the settings and reset them the way you prefer. ... Canon Rebel XT / EOS 350D Digital Camera

Cannot adjust aperture or shutter speed in manual modes

Suggestion.... try to reset all settings to default. See what happens then. ... Canon Digital Cameras

My Nikon D70 is not giving me correct meter reading. It is either over/under exposed in Manual, Aperture, Shutter and Program mode. However all the option under the Automatic modes seems to work fine. Is the sensor going haywire in Manual related mode??

How low/high do you have the ISO set? ... Nikon Digital Cameras

Shutter speed and apertue not working for Nikon D60 Digital SLR

What about other modes?\015\012Can your camera still take photographs?\015\012\015\012You can Try the following;\015\012 Remove the batteries , as also remove the memory card. wait for about 5 minutes. Then install the o ... Nikon D60 Digital Camera with 18-55mm + 55-200mm lens

Olympus e410 - shuuter speed not working in manual aperture or speed mode

... Olympus EVOLT E-410 Digital Camera

I have a FinePix F440 Digital Camera. It worked really well until recently when using auto shots and even portrait shots seem to let so much light in you can barely see the image. The shutter speed seems really slow as thought it is sticking. It still works ok in movie mode. Help!!

... Fuji Digital Cameras

Displays all white in all modes. Kodak V570. Turn the power on and all I can see is white. I have tried a different battery an no battery, just power cord. I know the camera good enough I can go into the menu options and select some different features without actually seeing the menu. All that seems to work fine and the lens is working ok. I can push the shutter button, the flash goes off. I can't see the photo on the camera, but I can see the photo if I put the SD card into my computer. Please

Displays all white because all the color screen have RGB mode if any of mode's are not work correctlly it's mean's color chip was fail and not working. u have to repair ur camera and change ur display screen. ... Kodak EasyShare V570 Digital Camera

I have an EOS Rebel XTi. The Mode dial does not show all zones, ie: It shows Program and Shutter-priority and automatic depth-of-field but does not show Aperture-priority or Manual modes on the setting display when selected on the dial.

Rebel does not have 1.0.4this can be a possible non canon firmware or a beta versionflashing your 1.1.1 may help out with this issue. ... Canon Digital Cameras

Aperture Priority Mode - an undocumented feature

In addition to the "quirks" of the Landscape and Aperture Priority Modes (neither mode works as documented!)..... The camera also behaves differently in full Manual Mode (it changes the settings, whether you want it to or not to compensate for availa ... Epson PhotoPC 3000Z Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2673 seconds