Having problems with your Digital Cameras ?

My Canon Rebel XTi lost its RAW capabilites, probably after downloading the last firmware update. I get the 6 Quality options, but not the RAW option.


Answers :

I think the RAW is not available in the "Auto" option. The Instruction Manual doesn't mention this or the explaination of the RAW feature. Thank You.
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Canon Rebel XTi lost its RAW capabilites, probably after downloading the last firmware update. I get the 6 Quality options, but not the RAW option.


I think the RAW is not available in the "Auto" option. The Instruction Manual doesn't mention this or the explaination of the RAW feature. Thank You. ... Digital Cameras

My Rebel XTi lost its RAW option in the Quality capabilities, probably after installing the latest Firmware update.


Is it in one of the creative zones? Like shutter speed or aperture? As using one of the baasic modes you can't choose to use RAW. ... Digital Cameras

Hi... i purchased this camera 2-3yrs back in the earlier days i enjoyed a lot with its picture quality and image stability.. but from last 2months i m not getting the quality what i was getting in beginning what might be the problem for this? i get shaky images even in daylight. please give some tips to correct it


Change you camera ... Canon PowerShot A710 IS Digital Camera

RAW quality mode option


In the RAW mode, the image is compiled of raw data with no compression and no enhancing settings from the camera such as sharpness, contrast etc. It provides a higher dynamic range with the maximum image quality without being processed, so the user c ... Olympus Camedia E-20N Digital Camera

I have a nikon d70 digital camera with which I have shot a few thousand exposures. A number of what seem to be minor software errors have been cropping up. For instance: I can't get the camera to "beep"; I can't format the memory cards using the 2 button system - I have to go through the menu setup; I can't select certain of the image quality options using the "quality" button - I have to go thru the manu. Certain numbers come up unreadable on the control panel. The above problems do not stop


Hi,\015\012 Sounds like you have a hardware issue and not so much a software problem...\015\012Try: removing battery and lens leave off for a few days.\015\012put in a newly charged battery and different lens...\015\012turn on ... Nikon Digital Cameras

When I recently turned on my camera (D-630 Zoom) to take a picture, I got the message titled Card Setup, with two options "Power off" and "Format". I turned the camera off, took out the memory card (1GB) and put it back in, as I did the last (and only) time this happened, about two years ago. But it has not worked, and I have been getting this message with the two options for a few days. Any ideas? Thank you.


If this exact card has worked in the camera before, chances are it has gone bad. Typically, if the camera says to format the card it is because it does not recognize the card. The only reason this would happen is if the card is unreadable from malfun ... Olympus D-630 Zoom Digital Camera

I just bought a sanyo vpc-t850 camera last night, I installed the software, I took a couple of pics and was trying to upload them the problem is I plug my camera up with my usb to my pc, I turn the camera on, and I choose the option pc everytime I do that, my pc shuts down and when it goes to restart it will not get off the part where windows loads. Can you help me find a way to upload my pics, I really like this camera and I would hate to have to return it for another one, if I can fix the prob


Have you trade to uninstalled the drivers and software on your computer that came with the camera?If this is a case of no solution due to bad compability, you can always buy a memory card reader (if your computer doesnt have a on board on ... Digital Cameras

Hello, I purchased a Kodak Easy Share C613 at my local Target last November of 08. I really like it but when I try and go backwards to look at my pictures it won't let me. Or it won't let me delete my pictures that I just took. I don't have the receipt or box anymore. My mom got the same one I could use her box to send it to you all to get repairs but the serial numbers will be different. Can you please tell me what are my options or what to do in this case I really need it fixed. Thanks so much


Haved you tried to take a picture without a memory card? if you unable to delete the pictue just using the internal memory of your camera., It means the buttons of the camera is defective and the navaigational key. you may call kodak at 1 800 235 ... Kodak EasyShare M1033 Digital Camera

Just purchased Nikon S570 less than a week ago. After taking 10 or so pics today while out on a hike, the camera locked up saying it could not read the card. It would not allow me to take anymore pics. It would not allow downloading of pics off the card either as it locked up my computer when I tried to download the pics. Also, the camera has locked up while I was trying to set menu options several times over the last couple of days. I have simply turned it off and then back on again to get it w


I simply returned the camera to Best Buy and asked for another one after describing the problems I had with it. I have not had any issues with the replacement camera.... ... Nikon COOLPIX S570 Digital Camera

Unsharp Images When enlarging any file fromn the Fuji S2pro, I am not getting sharp prints. Whether I shoot raw or fine jpeg, when blown up to 16x20 they are soft. Unsharp mask must be used to make it saleable, but I am still not happy with the quality.


Remember, always shoot in 12 meg raw. Never sharpen in camera. No problem. Now try USM at 100%, 4, and 2.1 to 2.6 pixels for a good, sharp 16 x 20. Remember, unsharp pictures are usually NOT caused by the camera. 1- poor technique 2- poor lens 3- too ... Fuji FinePix S2 Pro Digital Camera

I got my Canon a590 this past christmas; since then, every so often, it will not show any image on the screen. All I can see is the menu options. Every time I want to take a picture, all I get is absolute black. However, I can view pictures on a memory card with no problem on the main screen. The last 3-4 times this happened, the problem usually went away within a few days. I've tried replacing the batteries, but to no avail. Is my lens bad, or is it due to a more intricate problem?


Your camera should still be covered under the one year factory warranty. I would go to the Canon website and contact them for a covered repair if I were you.\015\012\015\012Best regards,\015\012Bob ... Canon PowerShot A590 IS Digital Camera

I have a Canon Ixus 700 with a 2GB SD card. I dont know why, but sometimes after I take a picture it deletes the previous ones. For instance, I have taken 20 pictures, everything ok, when I take the 21st it could happen that all the pictures get corrupted (including the last one), I get the first 10 and the last one or I loss all previous and only get the last one I took. I have checked the SD card, changed it, formatted it, etc and it still happens randomly. It is frustrating and I dont feel co


Have you ever connected the camera to your computer for downloading and then disconnected it without using the "safely remove hardware" function? If so, you could have corrupted the camera. Try going into the menu and find "reset" to get back to fact ... Canon PowerShot SD500 / IXUS 700 Digital Camera

I cannot get the Casio camera to find the firmware update


... Olympus SP-350 Digital Camera

I cannot get Remote Shooting option when I loaded the software for my Canon 350D (Rebel XT) camera on a computer with Vista. The software loads the Remote Shooting option for computers with Windows XP. Only option I get under Camera Settings is, Acquire and transfer images to memory card. Can anybody help me please.


According to Canon, camera communication is supported by Vista, like you have experienced. See:\015\012 ... Canon Rebel XT / EOS 350D Digital Camera

I need to know how to reset the resolution setting on my Fujifilm Digital Camera FinePix S5700/FinePix S700? Can you help me get the best quality? It isn't blurry, but I think it could be better. Maybe, I can't get any better than the settings I have already. What should my settings be to get the best quality pictures from this camera? Can anyone tell me, Please? Thank You, Vickie


See page 80 of this manual. ... Fuji FinePix S5700 Digital Camera

Hello sir, I have olympus C-70 model which is working very good for last 5 years. I am on vaction to france and it worked well till last 2 days. I have switched it off 2days back and switched on last night and it is not getting started. I have charged Battery fully and tried and still it is not getting started. Please help me in njoying my vaction with my Cam


Hi try to reset ur camera...To do such reset, turn on the camera and\015\012hold the menu button down for longer than 5 seconds. A message should\015\012hopefully come up on your LCD asking if you want to reset the camera.\015\012Select Yes...t ... Olympus Digital Cameras

I need to know how to reset the resolution setting on my Fujifilm Digital Camera FinePix S5700/FinePix S700? Can you help me get the best quality? It isn't blurry, but I think it could be better. Maybe, I can't get any better than the settings I have already. What should my settings be to get the best quality pictures from this camera? Can anyone tell me, Please? Thank You, Vickie My pictures look perfect in the view finder, but come out on the computer as grainy.....also, my S setting does not


You can try checking the user manual for those settings this is the link for that http://www.fujifilm.com/products/digital_ ... Fuji FinePix S5700 Digital Camera

Canon Powershot G10 image quality problems... I have had my Canon Powershot G10 for 2 years and have had the same problem from the start... it is now driving me mad! When viewing photos in anything other than the supplied Canon Zoom Browser or Photo Professional the quality is poor. The images are noticeably blurred and appear grainy. I normally shot in manual mode with ISO80 and record images in RAW+JPEG. Processing the RAW photos seems to slightly improve the blur (though it is still there)


... Canon PowerShot G10 Digital Camera

How do I get rid of the yellow camera icon? How do I get to the white balance option? It is faded out, all the other options are lit up. Please help!


Here is your user guide.http://www.fujifilm.com/support/digital_cameras/manuals/pdf/index/s/finepix_s3200s40 ... Fuji Finepix S3300 Camera 14 Digital Megapixel - Fuji

My Canon D50 is used only for astro imaging.The camera is not modified.My problem is when I shoot at ISO 3200 for faint galaxies,I get a huge amount of grainness..My friend has a Canon D40 and does not have this problem when shooting ISO 3200.The grainy background is so intense that it makes post processing of any quality impossible. Is there such a thing as a suggested setting for the Canon D50 that shows exactly what are the proper setting for the Canon D50 to get high quality images? I real


You could experiment with setting the ISO to 1600 or 800 and use corresponding longer shutter speeds. ... Canon EOS 50D 15.1MP Digital SLR Camera Digital Camera with EF-S 18-200mm f/3.5-5.6 IS Standard Zoom Lens

Exposure problems My CP 5400 is unable to get the correct exposure. It underexposes (even with all possible exposure correction)and the dark parts of the picture get a greenish tinge. The sunlit parts turn purple. It's a strange situation. Any ideas what to do? Is there a way to reload the camera's firmware? Is the firmware available anywhere?


Available here:\015\012\015\012http://support.nikontech.com/cgi-bin/nikonusa.cfg/php/enduser/std_adp.php?p_faqid=10119&p_created=1084174795&p_sid=R48Z9KSh&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD0yJnBfcHJvZHM9MSw1MCZwX2NhdHM ... Nikon Coolpix 5400 Digital Camera

I have a Canon EOS 50D Digital Camera and use 3 different Canon Lenses. I am getting "Error 30". I have taken the internal battery out and re-installed the firmware. At times I can shoot quite a number of shots before getting the error. But, once I start getting the error, it comes about every 4 or 5 shots. I believe this is very similar to the "Error 99" in the Canon 30D, which I also have. The 30D has been sent to Canon for repair and worked for a while and now it gets the Error 99 every coupl


Here is a link about err 30:\012 http://photo.net/canon-eos-digital-camera-forum/00WcpB\012\012\012I hope this helps! ... Canon EOS 50D 15.1MP Digital SLR Camera Digital Camera with EF-S 18-200mm f/3.5-5.6 IS Standard Zoom Lens

Silly problem I just can't figure out how to turn the side bar with the different shooting options off and use a regular shooting mode that's not night or outdoors, or some other option--I can't seem to click out of it, and I also don't have the option of using close-up, which I think is because I can't get rid of the menu sidebar. I don't have a manual to look this up in...


Everything you ever wanted to know about your camera:http://www.fuji.fi/documents/12/5000_manual.pdf ... Fuji FinePix S5000 Digital Camera

Intermittent problem The camera works fine for awhile then the 4-way selector suddenly will not change the menu. Or it gets stuck on full flash or no flash. The selections may get mixed up. The review won't activate except for the last shot sometimes. Then if you leave the camera for a couple of days it seems to fix itself. Everything is fine then suddenly all the troubles come back. Although it gets messed up like this you can still take photos with it and you can use the other modes usually to


Sometimes, by changing the swithces of the control panel solves the problem ... Sony Cyber-Shot DSC-S85 Digital Camera

On my GE E1050TW digital camera, when i start it up, it has a list of options such as '640x480p NTSC 4:3' and '720x576p PAL 16:9'. When i choose one of these options, another screen comes up with three options, 'YCbCr444', 'YCbCr422' and 'RGB444'. The first two are shaded grey and the last one is the only one i can click. when i do, the screen goes blank but the power light stays on. What ever i do, i cannot do anything to make my camera work. Is there a way of resetting it or something to make


These are output settings for when you want to connect the camera to a tv. If you were connected to a tv, when your screen goes blank, the picture would appear on the tv screen. ... General Electric Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2222 seconds