Having problems with your Digital Cameras ?

Nikon D70 The flash won't pop up and a clicking sound when I push the shutter. Also get r03 error. Jenean Stone

Answers :

Ma'm, try to check the settings mode of your camera it must have been flash disable. see also the bulb of your camera must be the flash bulb got defect.
Dear Sir/madam,

That's not an error, that's the space remaining in the buffer.The R03 or R04 message relates to the amount of shots you can take\015\012before the buffer is full. Try the camera on the Fine Jpeg setting and\015\012see what you get. Smaller file = more pictures\015\012before the buffer is full. Then you need to go into your CSM Menu, and scroll down to CSM #4, and turn LONG EXP. NR to "OFF".

good luck

Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Nikon D70 The flash won't pop up and a clicking sound when I push the shutter. Also get r03 error. Jenean Stone

Ma'm, try to check the settings mode of your camera it must have been flash disable. see also the bulb of your camera must be the flash bulb got defect. ... Digital Cameras

Button-be-dead Ok, so this might sound kind of stupid but my camera was in my purse and I didn't drop it or anything, but when I went to take it out to take pictures, the button you push to take the picture was already half down so it won't stop auto-focusing. I can't zoom in or out, look through my pictures, turn the flash off, delete pictures, or change picture styles. I know it's because of the button already being down halfway but I really need to know how to fix it and get the button back

Thanks for posting this article as I had no idea of the cause and was suspecting a firmware/software fault.\015\012\015\012I had the same problem a few days ago. As my camera was out of warranty and the advice from a salesperson in a well known chain ... Canon PowerShot A75 Digital Camera

FLASHES C:13:01 When I turned the camera on, I looked at monitor to take picture and was flashing C:13:01-wouldn't take a picture. Shut camera off, turned on and got two pictures off. That was it. By shutting camera off and on was able to get to the review setting and viewed the 80 pics. stored; that was yesterday. Today I get the c:13:01 code on each camera mode and review setting only shows the 2 pics from yesterday, then blue screen, though as I push the review button the on screen picture nu

OMG!!! If you still have the camera, try this. I read in one of these forums to spray a burst of brake cleaner in there and blow dry for a few seconds and believe it or not, it worked! That's after me taking it apart to make sure the connectors weren ... Sony Cyber-Shot DSC-P200 Digital Camera

Sony Cyber-shot DSC-H10 No flash happening for me and when I push the flash button I get a yellow caution with the exclaimation mark stating that "flash setting cannot be changed" and when I do take a picture I can hear clicking going on in the camera which I assume is the flash. I have manually lifted the flash and there is still not a flash going on. Please help....Donna

Certain camera settings can not use the flash. You need to change the camera to another setting and turn the flash on. ... Digital Cameras

I have an old Sunpak 3075G Thyrisistor circuitry Flash that I used to use over 15 years ago, I recently got interested in Digital SLR photography and went to try it out the other day but I have a problem The flash refuses to fully charge up. Even with new batteries , it just continues to emit a high pitch hum usually associated with it recharging, but the ready light will not come on at all. When I try to push the mainual flash button I get no operation so I presume its not charging itself.

... Digital Cameras

I was taking photos over the weekend with my Olympus E-500 and the eyepiece viewfinder got darker than usual. I was using a promaster 5750DX flash. Even without the flash, the eyepiece viewfinder has remained dark. Also, I reset all settings to the default settings and now when the built in flash pops up, there are a series of three "beeps" and the camera tries to focus. I cannot get it to take a photo however. I also pushed the button for the sensor cleaning today. Could this have screwed u

Hi,\015\012Before doing sensor cleaning did you keep camera on bulb setting. This allows the cameras mirror to stay up until you choose to close it\015\012When you press the shutter release button it will lock the mirror up out of the way ... Digital Cameras

How do I get my Sanyo Flash camera to work in Windows Movie Maker? Downloads and will play on viewer but will not import to Movie maker. I tried Prism Converter but i get picture on some but no sound.

I use the Sanyo video to Windows Movie maker converter import the footage successfullycheck ... Sanyo Xacti VPC-CG9 Digital Camera

I was trying to put in my password and it would not take the password and the key keeps flashing to tell me the trail camera is still locked. Now I can not even get the trail camera to start when I push the power button. It comes up with the dashes and immediately shuts down. I don't understand any of these problems and how do we get this corrected?

See "forgot password" above. Bushnell has a serious problem on their hands if they want to continue selling these cameras.\015\012\015\012They need a PIN # for each camera. ... Bushnell Trail Sentry 11-9200 Digital Camera

Can't get flash to work. I push the icon for the flash but nothing happens?

There are some modes in which the flash will not fire (like sports or fireworks). Also, the flash will not work for videos, only for still photos. ... Nikon Coolpix L11 Digital Camera

I have just purchased a KWorld DVD Maker 2 and set it up as per instructions and the DVD Maker itself says by pushing the button it will start flashing blue, well this does not happen and it gets very hot. I have the bigger usb end plugged into computor while my Sony video camera has only two female outlets 1 yellow the other black so I insert two cables with male adaptors to install. Where do the other leads go to or are they for other appliance uses. Please advise as I am getting frustrated

The 1 yellow and 1 black female outlets are likely for RCA Phono jacks and older VCR connections. DVD Maker sounds like you would use a camera that has USB cable to the computer and the computer writes DVDs using the Kworld DVD Maker 2.\015\012 ... Digital Cameras

Hi, I have just bought the Fuji JX530. When I take a picture I get a split second clicking sound coming from the lens before the flash goes and the picture is taken. The picture is fine and the mechanism moves smoothly when turned on/off and zoomed in/out. Is this just the normal operating sound of the lens or something else ??

When you press the button, the camera performs many functions in a split second such as set the focus, set the aperture and shutter speed, calculate the flash power, etc. It will make sounds and if the pictures are fine, then all is well. ... Digital Cameras

I just bought a tl105 samsung camera. When in movie mode, I can't always get it to start recording. I get an audible sound, but sometimes nothing happens when I push the shutter button, and sometimes it starts recording.

If you've just bought it, take it back to the vendor and request they demonstrate it to your satisfaction.If they can't because there's a fault, request a replacement or refund under warranty. ... Samsung TL 105 Digital Camera

I686 Err:A5,62,63,01,32 Java failure on i686 BRUTE. Found factory reset tool. Followed instructions for FLASH STRAP and I get the old Err:A5,62,63,01,32 Run utility and it replies Error 0 Application Error Contact Support. MBM 0A.40 Zues P80 S14 M0 R03 AP Prd BP prd UID Flash ADBA Err:A5,62,63,01,32

... Motorola Digital Cameras

Just got a pentax K200D for chrissy, am absolute beginner! Have taken some photos on automatic then must have pushed a wrong button. Now cant take a photo, only get a flashing F-- 999 on LCD panel. Help! Pam

My husband spent 1/2 hour interpreting the manual and found I had taken the aperture setting off automatic! ... Pentax K200D Body only Digital Camera

Power on Hi! My name is Sam, i bought a casio Exilim Ex-Z50 3 years ago. For some reason, whenever i push the on/ off button on the camera, it makes a bip, bip sound, the screen stays black, and the zoom does not come out. The battery is fully charged because i got the measure out from my volt-meter. Can i have an advice on what's to do to get my camera fixed.

Try the procedures in this tip. ... Casio Exilim EX-Z50 Digital Camera

There's a long delay from the time I push the button until the flash goes off and the picture actually takes. I miss the smiling child and get a turned head instead.

Press the shutter button half-way and allow the camera to lock in the focus (it will beep) and when the moment is right, press the rest of the way. ... Digital Cameras

When I press the shutter button all the way it doesn't always take a picture. It flashes a few times and some numbers blink and the green dot blinks. It also says "busy". I might get a picture one out of ten times I push the button. Please help!

What numbers blink? The numbers are the error code that can help me identify the problem and tell you how to resolve the problem.Sai. ... Canon EOS 500D / Digital Rebel T1i Digital Camera

The gears seem to be frozen. the lens wont move in or out by self and when turned on screen displays turn cam off the back on? If you get the lens out or push it back in, in wont move back into the other position by itself. it doesnt even make any sounds like its trying to move

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FX50 Digital Camera

Zoom error Today after using my camera for awhile the back screen displayed "zoom error" and a little sound whirled. Then the camera shut off by itself. I turned it on and off a couple of times, but without success. The lens is extended and will not withdraw back into the camera. I have taken out the batteries and re-inserted them. Finally, I gently pushed the lenses back to the body of the camera (as they seemed to be trying to go back to the camera), I am still getting the zoom error reading a

You may be true that sand must be creating this problem, as this happens very often. the sand enters into the lense assembly, creating friction in the movement. if this has happened total dismantelling and cleaning of the lense assembly will solve t ... Olympus Camedia C-350 Digital Camera

Blank LCD Hi! I have a Sony Cyber-shot digital camera, DSC-S40 model. I've been using it for two years now. Some months ago I couldn't get a picture from the LCD. It just went white. I can't see a thing. When I shoot the flash goes on and I can also hear the sound that it's capturing some image, but the LCD is still white. It can easily switch ON and OFF. I've even recharged and changed the batteries. It's festive season and I need to capture some memories with my Sony camera. I have misplaced m

Well its a cheap fix, dosnt last too long. In the lower right corner of\015\012the LCD, not actually on the LCD but just on the plastic portion of the\015\012camera push very hard ... Sony Cyber-Shot DSC-S40 Digital Camera

Broken zoom my camera was on so the zoom was out and i tripped and landed on it. now the inner part of the zoom is sat at an angle, wont move in or out & when i turn it on you can hear it attempt to push it out fully 5 times while the orange light flashes and then it gives up and turns off without the screen starting up. Does it sound fixable or is it time for a new camera? I only got it last xmas. Any idea where the best place to take it for fixing is? I'm based in Milton Keynes

You may want to call Olympus Customer Service to discuss their repair policy and procedures. They will have suggestion as far as repair goes or give you a local place to take it for service. Their telephone number is 800-622-6372 option 2 and then ... Olympus FE-210 Digital Camera

After the second or third picture that I take the camera freezes up and the "red busy" light continuously flashes. and will not let you do anything or let you push any buttons. The only way to get out of it is to take the battery out of the camera and put it back in. After doing so none of the pictures that I just took show up. What do I DO?!

Take the battery out put it bak in repeat this a few times and waahalla!!! ... Olympus Stylus 760 Digital Camera

Help!!! Hi I have a Dimage 7 HI and It only lets me take one picture at a time before deleting. My card is empty and when there is one picture on the card you get ready to take a shot and it sounds like it is going to take it and you can press the button all the way but it never takes it. on the screen it says that the frames are moving but it doesn't take the photo if there is already on taken. ai need help to figure out why that is . is there a button that got pushed to change the amoun

1. Format CF to FAT16 - no remember how many folders u may have at once2. Set "DRIVE" to single frame3. Set quality to FINE - RAW may take up to 10MB and u can`t take series nor UHV movie ... Konica Minolta DiMAGE 7Hi Digital Camera

My sony I just got a DSC-S40 from a friend. I actually swoped my previous camera for this one. When I switch it on, the lens seems to get stuck and not come out all the way. I makes a grinding noise and does not show any picture on the screen. The flash goes off when I push the button, and the little guide dots on the lcd screen shows, but the the screen stays black. I am able to view the photo's that are on the camera taken before this problem, but am unable to take any photo's now. The shutter

I can fix your camera, it is not an easy thing to post because the post would be forever long....$20 and it would be good as new. ... Sony Cyber-Shot DSC-S40 Digital Camera

The flash on my Samsung NV15 camera is sticking. I basically have to push down on it after I know it's been released in order to get it to pop up.

... Samsung NV15 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3223 seconds