Having problems with your Digital Cameras ?

Does anyone konw where i can get replacement parts for the sliding shutter cover on my Canon PowerShot S45? The integral power switch is broken.

Answers :

You may contact the Canon Parts store directly at 1-800-385-2155 to inquire
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Does anyone konw where i can get replacement parts for the sliding shutter cover on my Canon PowerShot S45? The integral power switch is broken.

You may contact the Canon Parts store directly at 1-800-385-2155 to inquire ... Digital Cameras

I have a canon Power Shot S50. The mechanical slider that covers the lens is loose. When I open it, it doesn't power up the camera. I suspect there is a switch underneath the cover is broken.

The open door button on a circuit board is usually micro. A loose cover will likely not make contact with this small switch. Take the cover off and tighten the screws on the inside. Try to locate the switch to inspect if it has been wore off, brok ... Canon Digital Cameras

Canon PowerShot S45 lens is retracted out and lens cover won't open or shut. camera cannot operate. Powers up, E18 shows on blank viewfinder, beeps 3 times and goes back to blank viewfinder. Shift lens cover back, sounds like it's opening/closing, but nothing happens other than the above.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot S45 Digital Camera

Power problem My camera is dead even though it has a fully charged battery inside. You slide the cover back and nothing happens. We tried a different fully charged battery and still nothing. Any ideas? Have the Canon Powershot S30 since many years (some 6000 photos taken) but suddenly the camera is absolutely dead. The lens won't come out when sliding the lens door back, no pictures shown at the monitor when switching the viewing button to the right, no USB connection when connectiong to a P

I have the same camera with the same problem. I have tried the suggested solutions with no result. Any other ideas? ... Canon PowerShot S30 Digital Camera

I have a Canon EOS 40D When I switch it on all appears fine. When I take a photo the shutter remains open & all power is lost. I then need to remove & re-install the battery to recover power. I can view existing photos on the memory card but as soon as I switch to take a photo & click the shutter, the above happens again. Before I decide next steps I was hoping someone out there could help.

See if the problem is related to the memory card. Start by ejecting the memory card and after saving to disk via card reader, format the card. If there is a problem writing to the card, it will probably show up during the format process. Or, inser ... Canon EOS 40D Digital Camera

Broken shutter I dropped my canon powershot A540, and now the shutter doesn't work. teh camera seems to functional perfectly otherwise. I'm pretty sure that its just some spring or connection that was broken, because the shutter is lose. There is very little resistance when i push it and when i try to press only halfway i cannot feel a "half shutter". can i fix this myself?

You are a **** ... Canon PowerShot A540 Digital Camera

I slipped while hiking and sat on my Canon PowerShot SC 210 IS which was in my back pocket (dumb). The shutter cover now does not fully close nor open. I can move it open with my finger, but it will not close fully. There is a visible dent in the rim around the lens cover shutter thingy. Am I screwed?

HiNo, yours is not screwed if any other camera function work.I would like to help you. Could you photo the dent area and post here. After that I can help you. ... Digital Cameras

Canon a80 dear hi,      hope u all r well. please help me to solve the problem for the canon powershot a80 which suddenly got dead.when i press the power switch it takes around 150 ma of current till i keep power button pressed.no light comes on.After releasing thepower button the current goes down to zero.      please help me.i m an electronic technician.this is my personal camera.thanks my email  [email protected]

Here are some simple things to try first for a camera that won't power on:\015\012http://camerarepair.blogspot.com/200 ... Canon PowerShot A80 Digital Camera

The black paisley plastic covers to the shutter on my Canon Powershot A630 do not open fully, so pictures are thin bands of picture amid large black areas where the covers do not open. How can I get the plastic covers to open when the lens extends? The covers appear to be seated correctly.

Here's some tips on fixing stuck automatic lens covers. Good luck! ... Canon PowerShot A630 Digital Camera

A Canon A570IS will power on and and everything works with external power (3.5-3.7V, 2A. 3rd party) but is dead with batteries (two fresh alkaline or NIMH AAs). I have used parts (from junk 570s) and have replaced the main board, button board, flexicable that includes on/off switch & shutter, leds, etc.. Again, lens, flash, storage, LCD, etc. work with external power, but not with batteries. I am at a loss. Any suggestions?

Since the external power works, we need to know, first off, if the battery terminals have continuity with the external power supply contacts. That will tell us an important part of this puzzle. The one hard thing about this problem, is that what ... Canon PowerShot A570 IS Digital Camera

Lens restart error on my Canon Powershot A460. Lens has come out and shutter cannot be closed, inspite of battery & card being removed from it. How ever many times I tried switching ON/OFF button after loading my recharged(may be partially charged) battery, it's not showing signs of recovery. Just one beep sound , a blue screen written Canon & a black screen written "Lens Restart error" comes alternatively according to the pressing of ON/OFF button.In this alternative cycle, for one cycle, a gre

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A460 Digital Camera

Canon A510 Powershot camera will not stay powered on when I turn it on in picture-review mode. It comes on for a second --> Canon screen flashes on -- and then shuts off. In picture-taking mode, it seems to be fine. It stays on. But if I switch to review mode, it turns off. I've changed the batteries. It was fine last time I used it, last week. I left it plugged into the PC for a few days, if that makes any difference.

These cameras have capacitors built into the circuitry. A capacitor holds a higher voltage so the camera will operate when in use. Some modes in these cameras do need a higher voltage to work. The capacitor for the review mode is weak and will need t ... Digital Cameras

Broken shutter I dropped my canon powershot A540, and it seems fully functional..... but when i press the shutter nothing happens! I can't take pictures!

Could be a loose ribbon cable or a frozen internal shutter issue. with out looking at it it is hard to properly diagnosis the issue. let me know if I can help out any futher. ... Canon PowerShot A540 Digital Camera

Canon powershot a310 shutter slide open, black display. shutter slid closed and camera powered on, will display photos.

... Digital Cameras

My Canon PowerShot SX10 IS is 2 years old. Now, when I use the zoom, it beeps continuously and turns off, but the power button glows as the camera is on. Then I need to switch off the power button and the restart to work on it. This happens, when I zoom faster.

I had a similar problem. I took it to a camera repair shop and got an estimate of $45 for repair. The shop repaired the camera for the estimated price. I was told that the camera had needed cleaning. I am satisfied with the repair and the price.I ... Canon PowerShot SX10 IS Digital Camera

My Canon G9 Powershot will not switch on at all. It was working fine then the next time I tried it would not switch on. It was not dropped or was it exposed to water. It about 3-4 years old. The battery shows charged but when inserted into the camera it does not power the camera up at all then it shows it needs charging again??

The\015\012 Canon G9 has a design defect, two screws fall out inside the camera and\015\012 short out the fuse. If you've never had it fixed for no power before \015\012this is most likely what has happened to your camera. ... Canon PowerShot G9 Digital Camera

Canon PowerShot S45 Digital Camera

Maybe this fuse is blown:http://www.hit-karlsruhe.de/aol2mime/images/S45_S50_PowerFuse.jpgShort it or replace it.See also http://www.hit-karlsruhe.de/aol2mime/canon_powershot.htmGood luck! ... Canon PowerShot S45 Digital Camera

Shutter cover opens partially in power shot A520

Brother the camera gear system has got problems it seems. it happens due to misplacement of gears inside it. even tough u can do it manually dont take risk of doing it manually untill u have full knowledge of internal parts. am from chenai. her ... Canon PowerShot A520 Digital Camera

Broken Mode Switch for Canon Powershot A530

... Canon Digital Cameras

Canon Powershot A620 Shutter Button Replacement

... Canon PowerShot A620 Digital Camera

Shutter will not open when you turn power on - Canon PowerShot SD500 / IXUS 700 Digital Camera

This could be due to some dust particles trapped in between the shutter blades. Please take it to the nearest authorized service center. ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Canon Powershot A610 digital camera--LCD screen shows icons, but otherwise is blank--there is no visible movement in the lens when I take a picture without flash--have tried setting it on TV setting and taking a picture, then opening the battery cover for a few seconds after waiting 7 seconds or so, but no images on the LCD except the camera's icons--ideas? probably a stuck shutter, or is it still possibly the CCD sensor even though there's no visible movement in the lens? Ideas? Thanks!

Much more likely that it's a stuck shutter, especially for your model camera. How many tries did you give the fix? Some people stated that it took at least 15 repeated tries before the shutter opened:\015\012\015\012\015\012 ... Canon PowerShot A610 Digital Camera

Lens cover won't open on power shot sd780 is - Canon PowerShot A630 Digital Camera

... Canon PowerShot A630 Digital Camera

The lens cover on my Canon PowerShot A620 does not open all the way when I press the shutter button.I have put freshly charged batteries in the camera.

So the lens cover is stuck.. carefully press the edges so the cover snaps open. ... Canon Digital Cameras

My canon powershot s45 works fine , until i plug it into my computer. then it wont even power up . its not my ports or cords i checked them. i dont have the manual & i think that a setting was changed or something . what settings do i need it on to transfer my pics to my comp?

When connected to the PC the cameras display will blank out, this is normal. If the cameras "Communication" setting is set to "Normal" you can only download images when the cameras drivers have been installed of the bundled CD. If you change it to "P ... Canon PowerShot S45 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3081 seconds