Having problems with your Digital Cameras ?

Black spots on camera window when I look through the view finder on my Pentax SLR Film Canera (MZ60

Answers :

Dear friend, take your lens off, turn your camera to M for manual, rotate the main comand dial till you see the word BULB, press down the shutter button and keep holding it down, use a hand puffer, not canned air and gently puff some air into the camera. Very important, the lens opening must be facing down so any little debris will fall directly out. Let go of the shutter button when finished and replace the lens, repete if needed. You can buy those little hand blowers or puffers at any camera store. Hope that helps, Barry [email protected]
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Black spots on camera window when I look through the view finder on my Pentax SLR Film Canera (MZ60

Dear friend, take your lens off, turn your camera to M for manual, rotate the main comand dial till you see the word BULB, press down the shutter button and keep holding it down, use a hand puffer, not canned air and gently puff some air into the cam ... Digital Cameras

I bought a PENTAX SLR K 100 D camera, loaded a new SD card, formatted it in the camera , inserted new batteries and tried to take a picture, No pictire, the shutter button seens to not be working. There is a f 689 in the view finder. I tried both MF and AF , both AUTO PICT and P ,The camera is set at defalt settings.I need help or must return it asap.

Just curious if the new batteries are alkaline or rechargeables. If they're rechargeables, make sure they're fully charged, but since alkalines come with the camera, I would use those.\015\012Couldn't find any information about the F689 in t ... Pentax K100D Super Digital SLR Camera

Pentax Optio s50 The LCD display has lost some pixels and now has a circle of black spots on the screen. Is there anyway to fix this or is it time for a new camera? I can't just look through the view finder because it is not a digital image.

If pictures taken in Auto mode look the same on a computer (or when printed) as on the LCD display a Sensor fault is indicated. If the Computer image is OK the LCD display on the camera is faulty.\015\012Assuming your camera is out of guarantee ... Digital Cameras

Hi, I have a Pentax K-x and it usually takes great pictures but for the last past 6 months my pictures look like they covered with dust and also i have have a few spots in the left hand corner looks like I am viewing my pics through a dirty window sceen . I have used the dust remover that is buit in the camera and does not fix the problem do I need to bring it in for cleaning thank you

Hi there you are right in your place. Its a dust. but you need to clean in different way. because the dust stick in side the lens and its not easily clean by that dust clean option. Some how your camera get moisture and dust stick on it. After drying ... Pentax Kx Digital Camera with 1855mm lens

When I start the camera motion camera is indicated and the aperture does not open i.e. no pictureis seen on the LCD or through the view finder. The camera is Canon IS 2 SLR.

... Digital Cameras

Windows Vista!!! When I plug in my cord from the camera (Pentax Optio S5i) to my new laptop with Windows Vista I get a message saying it can't locate Pentax driver and this isn't supported by Pentax??? or something like that.  My camera is not that old.  Is there any way I can get my camera to work with Vista?  I can't even get it to recognize the camera when plugging it into the USB port so it's not a software issue.  HELP I do not want to have to buy a new camera!!!!

There's quite a simple fix to this. Disconnect the camera and turn it on. Press Menu and move to the the little 'tool icon' tab. Under 'USB connection', change the setting from PC to Pictbridge. Press OK. Connect your Optio to your P ... Pentax Optio S5i Digital Camera

Have Nikon Coolpix 885 dig. camera, bought in 2000, still works OK. I had been transferring the photos to my old computer using "Nikon View" 5 version 5.0.0 software that came with the camera and my Windows XP operating system with no problems. I now have a new computer using Windows 7. This is my question: Will it be OK to install the original "Nikon View" 5 disk with Windows 7 or is there a newer "Nikon View" software to work with Windows 7 and my old Coolpix 885?

Nikon View has been superceded by Nikon Transfer and Nikon ViewNX (the transfer and cataloging/viewing\302\240functions have been separated). You can download\302\240the\302\240current versions of all (free) Nikon\302\240software fromhttp://su ... Nikon Digital Cameras

View finder is blurry - Pentax X90 Digital Camera

Try adjusting the viewfinder diopter as described on page 50 of the manual: http://www.pentax.jp/english/support/man-pdf/x90.pdf ... Pentax X90 Digital Camera

When I look through the view finder window. Everything that I see is out of focus...even the little numbers at the bottom. The pictures come out fine in Auto focus, but in any other mode, I can not tell if the camera is in focus. I cleaned the outside glass with a lens cloth but it has not fixed the problem.

Okay looking at the back of the camera where the viewfinder eye piece is right side upper corner you will see a small wheel partially covered by the rubber rim of the viewfinder by the side of it you will see a small line with a + and - that is a dio ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Canon SLR EOS D 1000 camera. Not able to take pictures battery charges, SD card empty flashing busy when looking through the view finder. Please assist or advise

Hi there\015\012\015\012Does the "busy" text have a lightening symbol next to it, or does it just say "busy" on its own?\015\012\015\012Please also let me know if there are any other messages on the screen or viewfinder. ... Digital Cameras

View finder indicators are blurry - Pentax X90 Digital Camera

Try adjusting the viewfinder diopter as described on page 50 of the manual http://www.pentax.jp/english/support/man-pdf/x90.pdf ... Pentax X90 Digital Camera

While in Aruba (91 degrees outside/70 degrees inside hotel room) my digital Pentax camera (Optio M50 model) developed a 'blob' in the LED view finder. It did not appear when I printed several shots to check it out, but it's still there. Is it possibly condensation due to the temp difference? How can I get rid of it? I thought about trying a hair dryer. Please advise. Thank you. Estelle

It certainly could be condensation. When it dried, it could have left a mark on the panel. As long as your pics turn out well, don't worry about it. If you try to take the panel off to clean it and you don't know what you're doing, you could cause ma ... Pentax Digital Cameras

All info inside view finder is blurred.and when shutter is pressed the camera just flutter several times if trying to take a pic and when press the mirror lock up there is a black coverong over the film

... Digital Cameras

I have an Olympus omPC camera that have been brought out of the closet. The Battery check only works if the self timer is turned on. Also can not see through the view finder nor does the film advance work.

... Olympus Digital Cameras

Older Pentax Lenses & Pentax digital SLR cameras

... Pentax Digital Cameras

Blurry images i m using the camera to capture images by CT scan film the ct film is multiple small images in view with name of patient and other details, viewing in view box (like glow shine board), before 2 ds my camera not capturing fine image, image view a blurry i can read patient name or other details. so i need help

It is possibly a CCD failure when it starts to fail it do like this as unable to focus the pics properly and the pics are blurry discolored and have different shades sometimes horizontal and vertical lines with white noise it is known problem in the ... Sony Cyber-Shot DSC-P73 Digital Camera

My camera turns on, but will not focus. You can hear the lens trying to focus but all the view finder shows is black and white horizontal lines. You can view the pictures that are already on the card in the camera, but nothing else through the view finder.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon Coolpix 5700 Digital Camera

View finder Camera will not switch to view finder mode it stays in LCD viewing even when the camera mode switch is changed, and will not switch to the menu allowing the card to format

I had the same problem, it is the switch inside that is broken which allows you to switch back and forth between viewing pictures and taking them. There isn't really a fix besides getting the switch replaced and I am having a very hard time trying to ... Konica Minolta DiMAGE Z6 Digital Camera

LCD Screen Hi i'm having a problem with the LCD screen on my camera. Today i used the tripod to take a few timer photo's and when i was done i took the camera off the stand and was viewing them when the screen started to flicker and went gray i have not had this problem before when using the tripod and the camera was secured the same way, i can view the photo's through the eye view finder but not the lcd screen. I there a solution or do i need to send the camera back as this is the second camera

There could be a loose connection to the lcd screen. You should have it looked at. ... Fuji Finepix S9600 Digital Camera

I have a Canon Legria FS19 and like I suspect a number of others cannot detect the camera when trying to run Camera Window. Nor do I get the option to import any movies when using imagemixer 3 se Ver.4 I am running xp with service pack 3 and my pc can recognise the camera as a separate drive in explorer. picassa 3 will pick up stills and allow these to be transferred and whilst I can drag and drop the .mpg files from the camera in explorer and can view them in Windows Media Player windows

You will need the Canon to Window Movie maker converter to convert CANON video to avi, wmv or mpg ... Digital Cameras

View finder was damaged during a vacation trip. The view finder was cracked and while I can still take pictures, I cannot frame the picture. Where can I get it repaired or do I have to buy a new camera. I just purchased this camera. It takes great pictures.

Call tech support listed in the manual ... Olympus FE-210 Digital Camera

My polaroid 300 instant camera is leaving 3 distinct white spots in the exact same location on every photo taken. When you look closly at the photo, you can see the white spots are indentations on the film. I've gone through 4 rolls thinking it might be the film, but I'm beginning to think it's the camera. Any suggestions?

... Digital Cameras

The view finder or screen are black. The lens moves out when the camera is powered on, I can hear the shutter click when pushed; the telephoto is moving; I have all the settings show on the screen when the camera is powered on but I cannot see anything through the view finder or on the screen and no image is captured when a pic is taken. I changed the batteries and it made no difference.

I know it may sound like the shutter is moving, but you're going to have to actually look down the lens barrel to confirm it's actually moving, and not just producing a sound effect from the camera. Also keep in mind Canon's SX IS series cameras are ... Canon PowerShot S3 IS Digital Camera

When i view my photos om my camera they are all there. But when i connect my camera to my laptop it open the window to view files but there are no files or photos available. But when i connect the camera to another laptop i can view the photos on the other laptop? please help with a solution for my laptop.

Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Sony Cyber-shot DSC-H50 Digital Camera

Focus camera will not focus, even sight screen is out of focus The camera will not focus. When switched on it beeps with a flashing green light near rthe view-finder and the lens housing extends. This repeats and the then the viewing screen goes blank. Pressing the AEL button will illuminate the viewing screen, but it is out of focus. Half depression of the shutter makes no difference. I had previously some intermittent operation of the zoom mechanism. The camera has not been dropped or jarred.

Your camera is having a problem positioning the lens unit, more than likely the cause is grit/dirt in mechanism, I recommend that you take the camera to a autorised service agent to have it stripped, cleaned and rebuilt. This is not really a repair t ... Olympus Camedia C-5060 Wide Zoom Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5445 seconds