Having problems with your Digital Cameras ?

Konica minolta mode switch

\015 You stated that you had some switches in stock for the problem with the Dimage Z6 in an earlier response,do you still have the item necessary to fix the problem,is it something that I could possibly replace or would I have to take it to a camera repair shop,and finally how much does this part sell for?\015

Answers :

The mode switch is soldered to a circuit board inside the rear panel of the camera, below the LCD screen. It requires a degree of electronic knowledge and skill, as you are dealing with very small, static sensitive boards. The repair requires the circuit board be removed.
\015\012I do have the switches in stock, if you want to repair it yourself, or take it to a camera repair shop with switch in hand. The switch is $23.55 USD. plus $4.00 shipping.
\015\012Cheers,
\015\012Dave
\015\012
\015\012
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Konica minolta mode switch


The mode switch is soldered to a circuit board inside the rear panel of the camera, below the LCD screen. It requires a degree of electronic knowledge and skill, as you are dealing with very small, static sensitive boards. The repair requires the c ... Digital Cameras

My Konica Minolta dimage z25 camera cuts itself off when I switch to the camera mode. New batteries do not solve the problem. Any ideas?


... Digital Cameras

PROBLEM WITH MY KONICA MINOLTA DIMAGE A2 DIGITAL CAMERA, AFTER TAKING SOME PICTURES WITH MY CAMERA, I REMOVED THE MEMORY CARD FROM THE CAMERA AND DOWNLOADED THE PICTURES TO MY COMPUTER, EVERYTHING WAS FINE. THEN I RETURNED THE MEMORY CARD TO THE CAMERA, THIS IS WHERE THE PROBLEMS STARTED. THE CAMERA POWERED UP OK, THEN I TRIED TO WATCH THE PICTURES I HAD JUST TAKEN ON THE MEMORY CARD, THE CAMERA INFORMS ME,(UNABLE TO USE CARD). I THEN SWITCHED TO SHOOTING MODE, THE CAMERA WOULD NOT LET ME TAKE A


Have you formatted the cards in the camera or in the computer? ... Konica Minolta DiMAGE A2 Digital Camera

System Error I downloaded the pictures onto a CD from my Konica Minolta today like I always do. When I was finished I went onto the camera to delete the pictures and format the card - like I always do. (I have had this camera for right at 1 year) When I turn the switch to the "view" mode it comes up with "system error" within about 2 seconds and the whole camera turns off. If I go really fast I can delete one picture at a time. I can still take pictures and they still show up (for 2 seconds).


Same thing happend to my father's camera (memory card). Seems that deleting the pictures from the card via the computer solves the problem. Corrupt files on the card cause the camera to read system error. No corrupt files = working camera! :) ... Konica Minolta DiMAGE Z5 Digital Camera

My Dynax 5D will not release the shutter nor will it turn off unless the battery is removed. The access light and the display remain on when the camera is turned off at the switch. All menus and autofocus work as normal, it will simply not release the shutter in any mode or with any of my Konica Minolta brand lenses.


Always use the best quality batteries available, I used some cheap batteries in my compact and had problems but it came good after a while with good quality batteries. Also the automatic lens protector had some grit stuck in it from the beach stoppin ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

PROBLEM WITH MY KONICA MINOLTA DIMAGE A2 DIGITAL CAMERA, AFTER TAKING SOME PICTURES WITH MY CAMERA, I REMOVED THE MEMORY CARD FROM THE CAMERA AND DOWNLOADED THE PICTURES TO MY COMPUTER, EVERYTHING WAS FINE. THEN I RETURNED THE MEMORY CARD TO THE CAMERA, THIS IS WHERE THE PROBLEMS STARTED. THE CAMERA POWERED UP OK, THEN I TRIED TO WATCH THE PICTURES I HAD JUST TAKEN ON THE MEMORY CARD, THE CAMERA INFORMS ME,(UNABLE TO USE CARD). I THEN SWITCHED TO SHOOTING MODE, THE CAMERA WOULD NOT LET ME TAKE A


Hi.If you already tried several memory cards, then it looks like the problem is the camera.To ensure you can go to a camera shop and ask them to test it, but if you already tried several new cards (ensure size of card is with ... Konica Minolta DiMAGE A2 Digital Camera

Two switches on my Konica Minolta A2 don't work: they are the circular direction switch on the camera back, and the ISO change switch on the left side. Also the anti-shake lamp lights up sometimes and will not turn off. Can this be repaired?


To repair it the camera must be taken apart, and the switches teated with circuit cleaning solution or replaced. ... Digital Cameras

I have a Konica Minolta Dimage Z6. The camera worked fine for a year. Got a System Error and now the Mode Button does not work. Can not shoot using the viewfinder and can not place the mode Button to look at photo's. Also am not able to format disk in camera.


I fixed my problem by removing the BATTERY then the MEMORY CARD which I replaced with an empty formatted memory card and replaced battery then connected Camera to my LAPTOP and on the LCD it was saying setting USB connection then with mode switch s ... Konica Minolta DiMAGE Z6 Digital Camera

Minolta a200 video switch does not work - Konica Minolta DiMAGE A200 Digital Camera


... Konica Minolta DiMAGE A200 Digital Camera

Konica Minolta Dimage 7 delay in start up and shot down procedure


... Konica Minolta DiMAGE 7i Digital Camera

My konica-minolta a200 stabilizer stopped working. its icon in the display is permanently red (actually it means the camera is too hot - but it is not). when i switch the camera on, or when it wakes up from sleep, you can feel a strong rattle or buzz from the stabilizer which lasts about 5 seconds. any ideas? thanks yigal


... Konica Minolta DiMAGE A200 Digital Camera

I have a konica minolta dynax 5d and it works fine. Only when there are to mutch foto's on my flash card (4G) it won't start up the program when i switch it on then the shutter doesn't work anymore (it still auto focuses). When i clean the card with a computer and i remove the map dcim the camera starts up again. It is very frustraiting when it doesnt work on a holliday fore instance resent in Barcelona... mist lots of good pictures. what can i do about it???


Try changing you card with other one and see what's happennig: if the camera is working properly then the card has issues.CIAO ... Konica Minolta Dynax 5D / Maxxum 5D Digital Camera

When I switch on my Konica Minolta E50 camera, "Error 2" appears and the lens does not come out. How can I fix it?


Solution for Error 2 on Minolta Dimage E50 is not very ease, anyway, the problem is involving the socket lens control flat. To proceed: remove front screws of camera, then check on left bottom close the lens if the flat socket ir really inserted on h ... Konica Minolta DiMAGE E50 Digital Camera

Konica minolta dimage z6 problem


My mode switch also failed. As an electronics tech (retired), I was able to source the proper part, and replace it. The camera is perfect again. I have more of those switches in stock. ... Konica Minolta DiMAGE Z6 Digital Camera

Built-in Battery I have a Dimage Z10 digital camera and it would appear that the 'built-in long-life battery' has now run out as my settings are no longer held when the camera is switched off. The manual suggests that the camera needs to go to a Konica Minolta service facility - as it is about four years and outside the warranty period is this something that I can do myself - if so how would I go about it?


... Konica Minolta DiMAGE Z10 Digital Camera

White Screen I am using Konica Minolta DiMAGE X50.I accidently dropped the camera from the chair.When I start the camera now , the screen appears to be completely white and I cannot see a single color.The screen remains white even when I preview pictures.When the camera is slightly tilted I can make out informoation on the screen reagrding battery level,current mode,present on the sides. What is the nature of this problem ? and can I solve it ? Thanx


Did you find a solution for this? I'm trying to find which LCD would work on this same camera. ... Konica Minolta DiMAGE X50 Digital Camera

What is the distance at Macro mode? - Konica Minolta DiMAGE A200 Digital Camera


In wide-angle macro mode, the minimum focus range is as close as 30cm from CCD (21cm from the lens front.) At this point, the magnification is 0.03x (equivalent to 0.12x in 35mm format).(Focal length is 7.2mm. At maximum magnification 283mm x 213mm o ... Konica Minolta DiMAGE A200 Digital Camera

What is the distance at Macro mode? - Konica Minolta DiMAGE A1 Digital Camera


In wide-angle macro mode, \015\012\015\012the minimum focus range is as close as 30cm from CCD(21cm from the lens front.)\015\012\015\012 At this point, the magnification is 0.03x (equivalent to 0.12x in 35mm format). \015\012\015\012(Focal length i ... Konica Minolta DiMAGE A1 Digital Camera

What are the flash metering modes? - Konica Minolta DiMAGE 7i Digital Camera


The ADI flash metering mode combines distance information from the auto focusing system with information from a pre-flash exposure. On the other hand, in Preflash -TTL metering mode, the exposure is calculated with a pre-flash only. Flash emission co ... Konica Minolta DiMAGE 7i Digital Camera

What are the flash metering modes? - Konica Minolta DiMAGE A1 Digital Camera


The DiMAGE A1 employs three metering modes; ADI (Advanced Distance Integration) flash metering, Preflash-TTL metering and Manual. \015\012\015\012The ADI flash metering mode combines distance information from the autofocusing system with information ... Konica Minolta DiMAGE A1 Digital Camera

When I switch to look at pictures I've just taken, I get system error and camera shuts down. Konica Minolta Dimage Z6.


Test etst test ... Konica Minolta DiMAGE Z6 Digital Camera

Mode Switch I have trouble switching from video to camera mode. The switch moves ok, but the camera stays in video mode. Sometimes it will switch, but may not stay there very long. Is this a dirty switch? Can I clean it?


I have this used camera and have the same problem. Does anyone know what the solution would be? I don't want to spend moneyy on this but would like to know if there is a DIY fix that I could try... Thanks ... Canon PowerShot SD300 / IXUS 40 Digital Camera

Image fault with Konica Minolta Dimage X1


Did the camera have been dropped? ... Digital Cameras

Konica Minolta Z6 camera lens won't retract or zoom out


I have the same problem. The lenses does not retract when turned off or function with the zoom control when turned on. Has anyone found a fix? ... Konica Minolta DiMAGE Z6 Digital Camera

This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.


You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0743 seconds