Having problems with your Digital Cameras ?

Zoom browser softwater installed for Canon camera will not work. Error message INVALID CLASS STRING. Using VISTA 32 bit


Answers :

Reinstall software from website below:

If you do not have the software, you need to download the software from one of the following locations:
\015\012
\015\012Official Canon Drivers and Software
\015\012
\015\012
Canon USA:DRIVER & DOWNLOADS
\015\012
\015\012\015\012
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Zoom browser softwater installed for Canon camera will not work. Error message INVALID CLASS STRING. Using VISTA 32 bit


Reinstall software from website below:If you do not have the software, you need to download the software from one of the following locations:\015\012\015\012Official ... Digital Cameras

I have windows 2000NT SP4, Ihave a vivitar 8025 camera, that says it works with XP or Vista. Is there a patch that will make this camera work on my computer. The error message is: "The dynamic link library gdiplus.dll could not be found in the specific path CDocuments and Settingslah blah. This camera used to work on my computer bbut after a crash and reformat it won't. any clues??


If you use a memory card (and you should) just use a card reader to download your pics. ... Vivitar ViviCam 8025 Digital Camera

My panasonic dmc-tz5 software will not allow me to burn a CD or DVD. I have tried several programs to burn and they give an error message on the Sony DVD attached to the TV. I have a 64 bit Dell Inspiron and the instructions say that it won't work with 64 bit Vista Home. Any suggestions?


OK, it sounds like you'd like to burn videos captured on your panasonic camera & watch them on your sony dvd player.I have above average experience with video formats on the computer, and for dvd, & I can help you.First of all ... Panasonic Lumix DMC-TZ3 Digital Camera

I have a Nikon S6 digital camera, everything about the camera seems to work fine, except for this "lens error" message I keep getting. Sometimes I'll turn it on, and I can use it just fine. But then there are other times where I have to turn it off and on in order to get it to work. And then there are those times where turning it off and on don't help. I usually give up and try again later. Sometimes it'll still give that error message, and other times, it will just work like normal. What can


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon COOLPIX S6 Digital Camera

Hi.....i am havimng a problem with my memory card PNY Optima SDHC 8 gb class 4......i have been using it in my sony camera....its was working fine at the start but recently after when i inserted the memory card in my camera it say "system error" or "error formating memory card".....i tried other memory cards in my camera and it worked..so i thought to formating my card using my camera usb cable but when i inserted the cable to my pc it says your disk is in read only format and make sure its ch


You will most likely find that your camera will work with cards up to a certain capacity e.g. 2gband not with cards of higher capacity. What this means in effect is that high capacity cards are not compatible with your camera. It would be inter ... Digital Cameras

Nikon FotoShare After using Nikon FotoShare successfully for some years, suddenly on clicking "send" I get this error message 12152 and "server returned invalid or unrecognised response" What has happened After using Nikon FotoShare successfully for some years, suddenly on clicking "send" I get this error message 12152 and "server returned


Transport Status 12152 means Connection Closed by Server.\015\012Eg the server has been taken down momentarily for database or server\015\012maintenance, or there has been a network error. Thi ... Digital Cameras

Olympus D-435 Our camera has been working fine until last week when we started getting this error message - memory full on a blue screen when we had taken only one photo (and deleted all previous photos). Thinking there was a problem with the memory card, we removed it and used only the camera's internal memory which worked for a short while - allowing us to take 12 shots - but now it will only let us take 1 shot before giving us the error message. Is there anything I can do? Many thanks


You can try updating the firmware of the camera since this is not a problem with the memory card its with the camera itself you can check Olympus web site for software update on this.Hope that helps....... ... Digital Cameras

We have installed new xD-Picture Card M2GB into Olympus Digital Camera Model No. C-750 Ultra Zoom not work, Screen mentioned Card Error I purchased a 1GB Sandisk (used camera) but when I power camera on I get a "Card ERROR" message. The very first time I powered up I programmed the date and time....but then got the error message. Now I get it every time I turn it on. I don't have another card to test it with:(


Go here\015\012http://www.casio.com/home ... Casio QV-R40 Digital Camera

Error message When I turn camera on I get following error message; Error 00-00-00 30-00-28 No idea what this means . I can still use playback function to look at photos but can't bring up screen to take photos. I thought it was because memory card was full but have since deleted heaps of photos and it still doesn't work.


... Ricoh Caplio RZ1 Digital Camera

8GB CENTON SDHC memory card - class 4 - worked okay first day. Removed card to transfer pics to computer. Did fine. When inserted card back in camera JVC-PICSIO GC-FM2BU, got "Memory Card Error" message. Could not reformat. Still okay incomputer, so reformatted in computer. Back in camera, got same message. Tried in other cameras - got same error message. FYI, card is NOT locked!


Sounds like you forgot to use the "safely remove hardware" when you removed the card from the computer. Also, never format a card in a computer and then expect it to work in a camera. You can try to format it a few more times in the camera but if not ... Digital Cameras

Got error 99 on canon 1D MARK II. When I push the fire button I get the error message. I use nikon 24mm lens. I used it now for 2,5 years whitout any problem. When I remove the lens and push the fire button 1 time it works, the second time the error agian. Is it the shutter, the mirror, the lens?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon EOS-1Ds Mark II Digital Camera

Last year, my friend & I both bought factory-reconditioned Polaroid 7.0MP digital cameras i737, supplied in original boxes, with all necessary bits. Both of us got 'Replace battery' messages, and cameras stopped working; we both gave up. A while ago, my grandson "poked around", had no trouble taking pictures, but got The Message. I've been trying again. Using Uniross NiMH batteries, 2700mAh, previously used only a little, newly recharged. Menu indicates that the camera knows that's what it's


The possibility that bad contact is draining is a well assumed one ..but the fact that you bought it refurbished lead to think that the batteries it selves were with issues..2nd thing all cameras drain the batteries when those are left inside , ... Polaroid i737 Digital Camera

Card error I used the camera a week ago. Wanted to use it and now I have 'CARD ERROR' message. The cards work in my brothers camera which is the exact same camera.....Evolt 500


Reformat the card but before doing that make sure to create a backup of all the files inside it. ... Olympus EVOLT E-500 Digital Camera

I bought new batteries from local store (one from Walmart and one from Meijer) but both would not work in my Cybershot DSC-H55. On powering up, I get the message "For use with compatible battery only" then it shuts down. The battery that came with my camera still works fine. I thought I had bought bad batteries but I returned for exchange, and 2 replacement batteries from 2 different stores still shows the same error message. Either the stores are selling 3+ year old batteries that have gone b


... Sony DSC-H55 Digital Camera

I have an Olympus X-44, its new and worked fine, but since I had to install a new hard drive this and another digital camera shuts down my computer everytime its connected to my pc, I need the cameras for work and this is causing a great deal of difficulty I need the photos urgently, there are no error messages, there has been a couple of times there is a no connection message but not every time, there has been no problem with any other connection and I use printers and franking machine etc. C


Obviously there is a camera firmware issue. You said you have printers can you see if one of the printers has a set of memory card readers for "Direct Printing these look like Odd looking USB ports but memory cards plug into them. You can use one of ... Digital Cameras

I tried to download the FinePix Z3 software to my new computer 2 times and the same errror message occurs. String X_O_Warning was not found in string table. Then X_OS_WARNING. Then when I tried to open the software and connect my camera it won't work. The camera image doesn't even show on the camera back and the computer shows an error message. What do I need to do?


Your new computer is Windows 7?\015\012You need to download the latest version 5,5 of FinepixViewer to run on Win7.\015\012You can get it here:\015\012 ... Fuji Digital Cameras

Camedia Master I have been using Camedia Master on my computer to edit my photos, for some time now. I like it very much. We have recently bought a new computer however, with Vista already installed. The program has worked fine until recently, but now when I try to use it, I get the message "A problem stopped the program working correctly. Windows will close the program and notify you if a solution is available." That is all that appears to happen, & I hear nothing from Windows! I just cannot us


To learn about the new and free version of Olympus Master 2 software go to: http://www.olympusamerica.com/cpg_section/oima_softwareMaster.asp ... Olympus Camedia C-740 Ultra Zoom Digital Camera

Hi.I use a mercury cyberpix S555V digicam(5 megapixel).I have windows 7 on my pc.I want 2 use it as a webcam on my pc & it supports the feature too.But even after installing its driver from the CD provided in the box,it does not detect the driver.Error message is "THE DRIVERS FOR THIS DEVICE ARE NOT INSTALLED ERROR CODE 28.My USB cable is perfectly fine as it works well while 'Mass Storage".Pl help me connect it as a webcam.It works as a webcam on XP but not on windows 7.Pl help.


Hello, please get the driver here :\012 Support">www.mercury-pc.com > Support \012\012www.opendrive ... Mercury Electronics CyberPix S-555V Digital Camera

I have a Nikon Coolpix L14 and all of a sudden, when I turn it on, the lens moves in and out while making a strange noise until a "Lens Error" message comes on the screen. I tried replacing the batteries, turning it off and on, taking out the memory card, and cleaning the lens. The first time I replaced the batteries, it worked...until the next time I used it and the screen was completely blurred. Then, I had the original problem with the "Lens Error" message. I really don't think it is a conde


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Nikon Coolpix L14 Digital Camera

Here we are on our DREAM trip West, currently at the Grand Canyon. Now, with my D80 getting an 'F---' error message in my LCD settings area. Was using my 18-135mm lens. Finally, and regrettably, switched to my telephoto and error message disappeared. This AM put the 18-135 lens back on and worked perfectly for a few inside shots inside our RV.


Use a clean moist cloth and clean the electrical contacts on the back of the lens and in the mount on the body. When putting the lens back on, try jiggling the lens a little and see if that helps. ... Nikon D80 Digital Camera with 18-135mm Lens

AGFAPHOTO DC730i NEWLY PURCHASED. USING A 4GB SD CARD, GET ERROR MESSAGE "CARD ERROR" ON STARTUP (CARD INSERTED SEVERAL TIMES) AND ALSO WHEN I ATTEMPT TO FORMAT GET "FORMAT ERROR". SD CARD WORKS OK IN ANOTHER CAMERA (SAMSUNG S760). I BOUGHT 2 OF THE 730i AND BOTH EXHIBIT THE SAME ERROR SO IT'S NOT(?) AN INDIVIDUAL CAMERA FAULT. COULD IT SIMPLY BE THAT THE 4GB SD CARD IS TOO BIG ? OR COULD PREVIOUS FORMATTING IN THE SAMSUNG RENDER THE CARD 'UNREADABLE' IN THE AGFA ? NEED THESE FOR NEXT WEEK SO AN


If your new card is actually an SDHC card, your camera can't use it....only SD up to 2GB. ... Agfa DC-730i / AP1100 Digital Camera

My panasonic lumix dmc-fx01 has stopped working, When I turn it on, the viewing screen comes on, I see screen and menus, but the scrolling button doesn't work to select, the zoom doesn't work and shoot button doesn't work. When I have camera in play mode and in video mode the screen displays this message: memory card error please check card This happened before, I took it to be repaired and it cost 90 euro to have a bit of dust removed


Navigate to this page ..>Panasonic Lumix Dmc-Fx01 service manual and go to page #20 Disassembly and Assembly ... Panasonic Digital Cameras

I have a Pentax K 100 D. I have tried using a Flash Memory card (a Sandisk Ultra 16GB) but without success. The message 'Memory Card Error" is displayed even before I could format it. The card had previously been used to store files from my PC (where it worked perfectly) but the camera could not format it even after I had removed all the files etc by reformatting it in the PC (FAT32). Is there any way I can get to use this flash card in my camera?


Hi Doc.SD cards different in size use different technology. there are design changes introduced at 2GB and 4GB that makes cameras not compatible with all cards.When this camera was introduced, it was compatible with cards up ... Pentax Digital Cameras

Memory card errors. I turn it on and get message MEMORY CARD ERROR PLEASE CHECK CARD. Occurs on different cards. Sometimes I can clean the contacts on the card and it will work. Sometimes, I can take pictures but if I remove the card it cannot be read if install it back or by a computer or printer. I use the camera as publicity in trade shows taking then printing pictures, so the cards are removed and inserted constantly. I have reformatted the card in the camera, still fails.


Hi wait a moment pls your request is been proceeding.. ... Panasonic Lumix DMC-FZ18 Digital Camera

When connecting the Kodak C913 to the computer, the USB hub will not receive information from the Kodak. The driver is failing for some reason, giving the error message (during reinstallation of the drive): An error occured during the installtion of the device. A service installation section in this INF is invalid. I have downloaded the software off the site and installed off my disc, however nothing seems to work.


Possible solutions:\015\012Remember you need to turn the camera on when transferring.\015\012Try a different USB outlet\015\012Try a different cable\015\012Try a different computer.\015\012\015\012If all fails plea ... Kodak EasyShare C913 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3993 seconds