Having problems with your Digital Cameras ?
When i turn it on it goes to "please turn camera off and then on again" the camera is a lumix 10xoptical zoom
Repair Help & Product Troubleshooting for Digital Cameras
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
When i turn it on it goes to "please turn camera off and then on again" the camera is a lumix 10xoptical zoom
... Digital Cameras
My panasonic lumix dmc-lz7 camera is not functioning. It turns on the zoom goes in and out and then displays the message "please turn camera off and on again" after doing this the zoom stays out. Turning it on and off again does not get it to work. Jessica
Battery might be weak and needs a replacement or there is improper shutting down. ... Panasonic Lumix DMC-LZ7 Digital Camera
Hi there, I have panasonic lumix fx12, the camera was working fine till suddenly i saw this msg "please turn off the camera and turn it on again" when i turn it off the lens does not goes in and when i turn it on the lens goes it and comes out again but as soon as i press the capture button again the same msg appears on the screen and again the same story, I can hear a little noise from the lens for a few sec too! Could any body help me on this please!!!!!!!
Some say that this could be because the lens is out of alignment. See here: http://www.digitalcamera-hq.com/products/panasonic-lumix-fx12?dj=1&ratings=1 ... Panasonic Lumix DMC-FX12 Digital Camera
About a week ago I turned on my Lumix TZ5 and in the screen displayed this message: "please turn camera off and then on again. I have taken the battery off and I have charged, but the message still displays. When I turn the camera on, the lens extends to the maximum but when I try to use the zoom the camera doesn?t respond. Then if I turn it off the lens stays out. Any idea? Thanks in advance. P.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Panasonic DMC-TZ5 Digital Camera
Unfortunately I dropped my lumix camera today. The outer rim of the zoom part is a tiny bit dented. When I turn the camera on, the zoom tries to come out, hunts a little and then goes back in. The camera appears to be fine apart from the rim which I think may be rubbing on the side of the zoom. What can I do, does the outer rim come off? Thank you in advance, I am on holiday in India and devastated I can't take photos.
Hi, Sorry for that, but the only remedy is to replace the complete zoom assembly, it can not be repair on component level. Thanks for using fixya. ... Panasonic Lumix DMC-LZ2 Digital Camera
Problem with the Canon PowerShot A630 Digital Camera Turning on camera in picture taking mode has lens going full zoom. In picture review mode no controls work. Out of a sudden I can't preview anymore, and in camera mode the zoom goes to 16X and I can't take pictures. Just doesn't work. I did not drop it or harm it in anyway.....please help.
This is going to be an internal problem. It sounds like you might have two problems going on. The zoom switch might be broken, and jammed in the on position. As for previewing your pictures, this could be a slightly loose ribbon connector from ... Canon PowerShot A630 Digital Camera
When I turn on the camera the zoom lense goes in and out and it says" PLEASE TURN CAMERA OFF AND THEN ON AGAIN" When I turn it off the lens stays out and when I run it on it gives the same error message and it will not focus or let me move the lens in or out.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Panasonic DMC-TZ5 Digital Camera
When I turn on my Lumix DMC-FS3 Camera the lens tries to go out but it does it half way, then it goes in and the action is repeated about three times. Then there is a message on the display that says "Please turn off your camera and then turn it on again". I do that and the process repeats. Thank you.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-FS3 Digital Camera
Digital camera got dropped into the sand, and some sand worked its way into the lens and focusing system, and now the camera cannot zoom or focus, but still turns on and takes pictures i have a lumix dmc fx12, and it got dropped into the sand at the beach. the shutter wont close properly, there's sand in the lens, and it won't zoom. Please help!! i don't know how to fix it!!
THIS SOUNDS TERMINAL, BUT YOU MIGHT TRY USING CANNED AIR LIKE YOU USE TO BLOW DUST OUT OF YOUR COMPUTER, AND SEE IF IT HELPS ANY. MOST OF THESE CAMERAS ARE MADE WITH THE IDEA THAT THEY WILL NEVER BE TAKEN APART OR OPENED FOR CLEANING ETC. SO, THAT IS ... Digital Cameras
When I turn on the camera (Lumix DMC-FX35) the lens goes in and out a few times and then displays a message telling me to Please turn camera off and then on again I have done this several times and the lens problems persists What should I do?
... Panasonic Lumix DMC-FX35S Digital Camera
My Panasonic Lumix FS5 tells me to turn off camera and turn on again and keeps repeating this. the lens will not close - I have charged up batteries. This seemed to immediately follow me zooming in to photograph. The lens does move slightly backwards and forwards when I switch camera back on then remains firmly stuck fully out. Please can you help. Thanks
Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-FS5 Digital Camera
Panasonic Lumix DMC-TZ3 I am unable to use the camera in photo/ video mode. When i turn it on the lens goes in and out, stops at rest position. A message then shows on screen, 'PLEASE TURN CAMERA OFF AND THEN ON AGAIN' The fault is still there when I do this. Regards Steve Woodbridge
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Panasonic Lumix DMC-TZ3 Digital Camera
THe zoom of my Panasonic Lumix DMC-FZ8 comes out when you turn it on and goes back in so the lens can be capped when you turn it off. However it is stuck in the extended position when the Cameras is turned on and won't budge or respond to the focus button. HELP! Jim Thank you.
This is actually an extremely common problem with digital camera. This can be caused by two things, 1. The zoom gets caught up when extracting in or out2. An all-to-common need for a firmware upgradePanasonic will fix it for $50, ot ... Panasonic Lumix DMC-FZ8 Digital Camera
Hi, im 14 and i got a Panasonic Lumix DMC-F3 camera for christmas and have had it for about 4 months, a few weeks ago a 1cm black dot appeared on the screen. It doesnt get bigger when i zoom in and doesnt go away even when i go to the cameras menu. today i went to turn it on and another black dot had appeared on the other side of the screen, there is also a thin black line going through the middle of the screen. i have tried cleaning the lens but it didnt make any difference. Please Help me i a
This is a faulty or damaged LCD screen. The fact that the pattern of dots and lines is unchanged by zooming and appears on the menu screen confirms it.The LCD cannot be repaired, it must be replaced. As long as the fault is not due to mis ... Panasonic Lumix DMC F3 Digital Camera
My Nikon Coolpix S203 has a "lens error". Every time I turn on the camera, then lens goes crazy, moving in and out and zooming in and out of focus, all the while making a beeping noise. It then retracts back into the camera and the message "Lens error." appears on the screen. Please, is there anything I can do to fix this? Thank you.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon Coolpix S203 Digital Camera
I have a Kodak EasyShare MD41. I received it last Christmas, I have not used it much but when I went to use it I thought the battery was dead cos it wouldnt turn on. I have fully charged the camera but it still will not turn on. the zoom pops out but then goes back in again. Can you help please. Judy Paterson
Your camera has a lens error. This\015\012 is such a common fault that I hope you don't mind me pasting my stock \015\012generic answer ... Kodak EasyShare One Digital Camera
Have had the camera about a year.... today took a picture with it and screen went black, the camera froze up (zoom lens stayed out didn't close). I have put new batteries in it.... the green light comes on on the back but the lens stays out.... the screen stays black. When I hold down power button to turn it off it quacks like a duck and goes off.... Please help!!!
This\015\012 is such a common fault that I hope you don't mind me pasting my stock \015\012generic answer below. No point in reinventing the wheel!Stuck lenses are probably ... Polaroid i830 Digital Camera
When camera is turned on, screen goes white with comment "please turn camera off adn then on again", lens won't retract or will retract, but opens up again after camera turned off...
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic Lumix DMC-LS80 Digital Camera
Zoom error showing on display screen of my daughters fuji finepix f40fd digital camera. Unable to press button to take photos and when I try to turn camera off the zoom lens goes in and out twice before turning off. Help - my daughter goes on holiday next week and needs her camera!
The lens Is trying to close properly but the focus mechanism has a problem, most likely jammed, so the lens cannot correctly close or work properly.\015\012It will need to be opened up and reset.\015\012Please email me. My email address i ... Fuji FinePix F40fd Digital Camera
The camera says please turn camera off and then on again every time i turn it on I dropped my camera and now when I turn it on the lens goes back and forth and the display reads "Please turn camera off and then on again"
Hi,\015\012I too have the sam problem but was able to solve it. I called the 1-800-number and was told that this is a very common issue or this camera. They told me to tap the lens when it was extended on a cloth or ... Panasonic Lumix DMC-TZ3 Digital Camera
My panasonic lumix dmc-fx01 has stopped working, When I turn it on, the viewing screen comes on, I see screen and menus, but the scrolling button doesn't work to select, the zoom doesn't work and shoot button doesn't work. When I have camera in play mode and in video mode the screen displays this message: memory card error please check card This happened before, I took it to be repaired and it cost 90 euro to have a bit of dust removed
Navigate to this page ..>Panasonic Lumix Dmc-Fx01 service manual and go to page #20 Disassembly and Assembly ... Panasonic Digital Cameras
I dropped my panasonic lumix digital camera to the ground and now every time i turn it on it says "error(zoom)"and the back round is blurry and i cant view anything;please help!
... Panasonic Lumix DMC-TZ1 Digital Camera
I have a Panasonic Lumix DMC-LC50 and whenever i try to take a picture the lens comes out and automatically goes back in and then says "please turn off and on the camera again". I kept doing what it said but it keeps doing it so i bought new batteries but its still doing it. So how do i make it work again? Thanks, ANa
Hm.Maybe you should just stop being a **** and walking the streets at night so your parents can stop calling wondering where the ******** are you dumb ****.Oh yeah about the camera.I already have lots of pictures of your slutty *** so what the **** d ... Digital Cameras
I dropped my panasonic camera onto the zoom lens. the zoom will not close, the shutter stays open. When I turn on the camera it says "please turn off camera and turn on again." When I do this the same message comes on again. Is it worth geting fixed?
... Digital Cameras
I have a small Panasonic Lumix DMC-TZ5 camera. After fully charging the battery I am all of then sudden getting this error message :"please turn camera off and then on again." When the camer is OFF the lens is extended and open. When I move the camera to ON the lens moves in to the closed position closes, then reopens, extends, tries to focus, is unable to and the error message appears "Please turn camera off and then on again" This cycle just repeats. The lens is able to extend it is not st
Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... Panasonic Lumix DMC-FZ7 Digital Camera