Having problems with your Digital Cameras ?

Lost power when changing LCD replacement screen

\015 Had power then it went dead. I charged it for (2) hours and still nothing. Can you help?\015

Answers :

The connection from the power button to the power circuit might have been loose or disconnected upon changing the LCD screen. If you can redo the LCD replacement please do. Also double check continuity of the power when you open the camera. What you can try initially is clean the metal contacts between the battery case on the cam. Maybe the battery is not reaching the metal contact points so you may need to pull it a little upward.
This is a problem with the battery connector that's why the camera wont power on, this requiore some service already so better take it to a service center near you......
Repair Help & Product Troubleshooting for Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lost power when changing LCD replacement screen


The connection from the power button to the power circuit might have been loose or disconnected upon changing the LCD screen. If you can redo the LCD replacement please do. Also double check continuity of the power when you open the camera. What you ... Digital Cameras

The lcd screen on my camera cracked, and it had a dark spot on it. I bought a new screen to replace it. I replaced it, but the only thing that happens its the the camera lens opens and everything stops. The lcd screen doesn't come on, and the camera wont power off. is there something that i am doing wrong, or that I need to do to get this to work? thanks, Lavoia


Maybe you installed the LCD screen wrongly and it doesn't respond if not properly installed. ... Digital Cameras

Hi, in a Kodak C743 , the display was replaced and the backlight remains on even when the camera is shutted off. It only gets off removing batteries. Any software release or connection change is required? What happens if the backlite wire is disconnected?. Do I get a dark screen on the LCD? Can you help? By the way if I decide to buy another replacement LCD screen Gen 1 , what consideration should I take in account in order to get the right one?


There is a brand or model of LCD screen that does this. The buyer I purchased some from is called yallstore. I have not noticed a significant discharge of my batteries but I am using 1.2 volt rechargeables. when a 1.5 volt is installed it really s ... Kodak EasyShare C643 Digital Camera

I replaced the lcd display screen with a new one ordered on an internet site. When the camera is powered on, all I Get is a white screen. All other functions seem to work normally. Do you think I got a bad replacement screen, or is there something else wrong with the camera ??


You might have mde mistake,while attachment.of lcd unt to the mother board ... Olympus FE-360 Digital Camera

I replaced my LCD Screen on my Canon SD450. The camera would start up, but the screen wouldn't show properly, now the camera won't power up at all. The power cable for the screen is bent from trying to get the connector seated properly.


Might have broken/shorted a trace in the ribbon cable that supplies the LCD with data, use a continuity tester on all traces to see if you have an open or short. Use the alligator clips of a multimeter to grab 2 sewing pins to use as probes as the tr ... Canon Digital Cameras

My daughter's l18 has a broken LCd and powers on but quickly powers off. If I change the LCD, would you expect the other problem to resolve? My daughter's friend thought the solution was to go buy a l20 as a replacement. But a second friend (friend?) managed to break the LCD on that one too! Are these cameras known for fragile LCDs? I'm assuming the warranty won't cover - but might I be wrong? Thanks, Frustrated Mom in NJ


Hello Marge. The entire Nikon line is sturdy but all cameras are fragile in a sense. Nikon Extended Service Coverage does not cover the cost of repairs associated with misuse, abuse or damage as a result of water or impact. Perhaps the ... Nikon COOLPIX L18 Digital Camera

In replacing a LCD screen on my Kodak V1233 I touched the metal of the LCD screen on the camera's circuit board and it sparked. The camera now does not power on. Have I fried the circuit board and what are my options?


I think that's a safe bet that the circuit board is damaged.\015\012I would see if it is repairable through kodak.com's website:\015\012\015\012 ... Kodak Easyshare V1233 12.1MP Digital Camera with 3x Optical Zoom

Fuji s700 camera, lcd display screen may be broken. when I power up the camera the screen is white with thin, balck lines running horizontally through 3/4 of the screen. the remainder of the screen is all white. I assume its cracked or something( my 2 year old likes to throw things), if so any suggestions on repair or should I just replace...


This sound like a broken LCD screen. Does the EVF (Electronic View Finder) still work? If you can live without the LCD, your still in business! If not, replacement by a repair shop is the only other option. If you want to try it yourself, you migh ... Fuji FinePix S700 Digital Camera

Fuji s700 camera, lcd display screen may be broken. when I power up the camera the screen is white with thin, balck lines running horizontally through 3/4 of the screen. the remainder of the screen is all white. I assume its cracked or something( my 2 year old likes to throw things), if so any suggestions on repair or should I just replace...


You can search the screen @ ebay and replace it yourself.. if you got a little screwdriver, you can do it!\015\012\015\012i just did it myself!\015\012\015\012see ya ... Fuji FinePix S700 Digital Camera

We replaced LCD screen, now the camera won't power


Hi, if you are still looking for replacement lcd screen for your camera, pls don't hesitate to contact us http://szaideal.diytrade.com/\015\012we are a leading supplier ... Polaroid i735 Digital Camera

Black screen Yesterday I grabbed my camara for a not to be missed shot and found that I too have the same problem now of the black image through the view finder and on the lcd screen. I have replaced the batteries, tried changing settings and nothing works. I too can see the icons and view previously taken pictures but can take no new ones. I feel that paying $350 for a disposable camara is a bit much! I purchased it just a little over a year ago. I saw on the Canon website that they are fixing


This happened to me then my camer just started working again after playing around with the modes ... Canon PowerShot S3 IS Digital Camera

Camera dropped. screen not working but camera is. replaced lcd screen, powers on, but no picture. what else could it be


CCD ... Digital Cameras

I have cannon power shot a95 camera. when I turned on today the lcd screen was blank and it takes black photoes. Working though as you can review past pictures. Changed the bateries and memory card. Reconfigured memor card also. The icons show on screen. The shutter is opening and the counter is advancing and flash working. please help me. thanks


Call support 1-800-828-4040 and describe your problem to them.They are going to send me a shipping tag for free shipping and will repair the camera for free if the problem is the CCD Image Sensor.Consumer Products Hom ... Digital Cameras

The camera is 2 years old, when turning on the power it goes to the date set,you can change the year, then it slides over to the month, but seems froze up, then the camera resets itself, if you skip the date set up, it shows a view on the lcd, but can't take a picture, and the camera resets again. My son borrowed it and took pictures snorkeling, so it may have gotten wet, but the lcd screen is not distorted as it was a year ago when I got water in it.


... Olympus Stylus 770 SW Digital Camera

Ive completely shattered th lcd on my jvc everio 30 gig camcorder but the rest of the camera works im pretty sure i havent hooked up to cpu yet but power turns on and all as normal all the sounds seem the same an etc... was wondering if its possible to get the lcd screen replaced at all and repaired ??? a[pprox what the cost might be if its even possible??? and where to do it im in victoria bc thanks??


Hi there,\015\012\015\012I'm sure you can get it replaced. You can call JVC's support line at + 1 (800) 252-5722 and provide them with the postal code of your Victoria, BC location. They would be able to provide you with the nearest servi ... JVC Digital Cameras

Screen will not come on, changed the battery with a new one and charged it . will power on but the lcd screen is blank


If the camera experienced any sort of physical or liquid damage, the LCD screen is always the first thing to go on a point and shoot. You will need to have the camera serviced by Casio or a certified technician and you'll be looking at a repair bill ... Casio Exilim EX-S500 Digital Camera

I have a 3 year old Sony DCR-DVD202E Camcorder which has worked perfectly up until yesterday, when the lens cover refused to open. Other thsn this the camera powers up normally and the LCD screen shows a white dot where light is entering through the cover I have tried changing the battery, switching the camera on and off many times, powering it from the AC adaptor and, at the suggestion of Sony, resetting the camera. None of this has worked. It is possible to open the cover manually, so it is


Happened to me before. NO Problem!!! The mechanical lens cover is "powered" by a small spring. When a little bit of dust/dirt/sand gets into the track it slides in, i gets stuck. CAREFULLY open the lens cover (maybe with the help of a toothpick) and ... Digital Cameras

I have a Canon G6 Powershot camera. My problem is that I have lost the two screws that hold the LCD screen housing together. Apparently they fell out at some point and I now need two replacements to keep the front and back together on the screen so that when I rotate it, it doesn't separate!! Anybody know where I can buy these two tiny screws? Thanks! MMM


Have you contacted Canon Support and asked them about this?\015\012\015\012Ask them if you can buy from them or from a third party, Canon authorized repair center.\015\012\015\012You might also Google Canon G6 Powershot Parts! ... Digital Cameras

NEED to change the lcd display screen for canon ixus 860 is, any idea how much does it cost for and where can i buy it from (india, pune) Initially it had small spots on the screen, now its hs big spots.. need to replace it :(


One possible source is http://uscamera.com/ck9-1294.htm ... Canon IXUS 860 IS Digital Camera

Lost AutoFocus My camera is new, bought 2 days ago, and yesterday I was changing the modes wheel (on top). Then I noticed it couldn't set focus at all, anymore! Should this be a problem with the camera, or can fix it by changing some configuration? At Scene mode, appears a [CAF] icon at left botton of the LCD screen (not documented in manual).


Set focus - it is autofocus is it not?\015\012 Take a few pictures and check whether they are sharp or not\015\012Also make sure your finger is away from the sensor window when holding the camera ... Samsung Digimax S630 Digital Camera

Hi, I have a Canon Power Shot S2 IS 5.0 megapixels that was working fine until one day I changed the memory card from 512MB to a 1GB. Now every time I turn the camera on and try to take a picture, a beeping sound and a legend on the LCD screen that reads: Memory card error. It's like something locked the shutter mechanism. I tried other memory cards with the same results. Thanks, Roger.


Its possible that there may be an error on the camera try to reset the camera by \015\012\015\0121. Turn the mode lever to the camera or play button\015\0122. Press and hold the MENU button for more than 5 seconds.\015\0123, T ... Canon Digital Cameras

Camera: Olympus C-720 Ultra Zoom Problem: All of a sudden the camera will not recognize nor format the memory card. I have tried changing the card, and the batteries...thinking the power was low, but with no success. On the LCD screen I get an 'Card Error'...with 2 different codes: 132F & 1304. I have tried to get information about these codes but there also I have not been able to acquire any results. Could someone please help me to fix this/these problems so I can begin to use the camer


This problem has been happening to owners like you since the camera first came out. Go to the Olympus website and e-mail them with your problem. By now, they have a solution to the problem. ... Olympus Camedia C-720 Ultra Zoom Digital Camera

Just bought a Canon Powershot sx10is. Bought used. worked fine at first. Now when I try to power on the camera the LCD screen quickly flashes white. The camera never turns on. I have tried various types of batteries including alkaline and rechargable. I have also tried replacing the small watch type battery that is in the camera (CR1220) and nothing works. Any Ideas?


I don't know where you bought the used camera but if you can, return it. ... Canon PowerShot SX10 IS Digital Camera

Canon Powershot SD750 powers up fine; lens extends fine. The LCD is black. I can see a faint image - enough to enter the menu and change settings. Increasing brightness has no effect. Seems like the screen has gone bad. Any suggestions??


It's not the screen, but its backlight that is the problem. It's likely a poor connection of the ribbon cable in its connector socket. This problem will require either professional repair, or your opening the case to reseat the backlight ribbon cab ... Canon PowerShot SD750 / IXUS 75 Digital Camera

When i turn on my sx 200 camera the camera has power but the lcd screen does not come on you have to press the on button several times to make it work. tried charging changed battery not worked


How old is your camera (presumably under 18 months as they haven't been out for that long)? There does seem to be some faults appearing with this camera. Have you tried resetting it to factory settings as that's what Canon told me to do when I had pr ... Canon PowerShot SX 200 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3419 seconds