Having problems with your Acer CU-6530 Digital Camera ?

Accer digital camera will not come on if on screen will on power

\015 Accer digital camera will not come on if on screen not on or will hand and zoom lense gets stuck outward\015

Answers :

Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Acer CU-6530 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Accer digital camera will not come on if on screen will on power

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Acer CU-6530 Digital Camera

I have a Sony S980 digital camera. The camera powers up but a message (Switch camera off and on again) comes on the screen. I think the lens is sticking instead of coming out but unfortunately I do not know what to do next. Do you think it can be fixed? Thank you very much in advance.

HI there,The unit could have a mechanical problem and causing the lens not retract. I suggest that you try to tap the camera at bottom lower back while pressing the power button.If the above solution does not fix or solve the ... Sony Cyber-shot DSC-T9 Digital Camera

I have a samsung L200 digital camera. It was working fine until my 2 year old little girl decided she needed to play with it. Not sure if she done something or not but now the camera will not work. When I try to turn it on the power button lights up but that is all that happens. The screen does not come on or anything else. Also the lens seems to be stuck and will not go back in. And I also just noticed that the power button will only turn the camera on but will not turn it off. I was trying to

Sounds like she may have dropped it and caused a lens problem. I don't know how much damage you've done so far in attempting to disassemble it but, if you can, put everything back and try the following:\012\012 ... Samsung L200 Digital Camera

I have a Sony S980 digital camera. The camera powers up but a message (Switch camera off and on again) comes on the screen. I think the lens is sticking instead of coming out but unfortunately I do not know what to do next. Do you think it can be fixed? Thank you very much in advance.

Only solution is replacing LENS BLOCK ASSY its part no is as\015\012A-1701-284-A LENS BLOCK ASSY ... Sony Cyber-shot DSC-S980 Digital Camera

On my GE E1050TW digital camera, when i start it up, it has a list of options such as '640x480p NTSC 4:3' and '720x576p PAL 16:9'. When i choose one of these options, another screen comes up with three options, 'YCbCr444', 'YCbCr422' and 'RGB444'. The first two are shaded grey and the last one is the only one i can click. when i do, the screen goes blank but the power light stays on. What ever i do, i cannot do anything to make my camera work. Is there a way of resetting it or something to make

These are output settings for when you want to connect the camera to a tv. If you were connected to a tv, when your screen goes blank, the picture would appear on the tv screen. ... General Electric Digital Cameras

My olympus stylus710 digital camera is currently not working. when we turn the camera on the lens opens and extends, quickly retracting. this happens several times before the unfocused screen turns blue and D: 5f08 5e02 comes up on the screen. once its in this mode no buttons work except just to power it down. any ideas on how this can be fixed? thanks

That looks like a software error. Check that the battery is fully charged and read the manual at troubleshooting section. if you don't have one, seach on web and you`ll find it. ... Olympus Stylus 710 Digital Camera

Help please last time i used my vivicam 5340 digital camera it worked fine. i have been trying to turn it on for the last couple of days and wierd stuff has been happening.the welcome screen comes on when i press the power button.I see the battery symbol comes on and then it goes off.i have been trying it now for a while and the same thing happens each time. i recharged the batery and tried again to put it on. that didn't work. I placed it on external power, that didn't work either(i took out th

See if keeping the power button pressed continuously without\015\012releasing keeps the camera on ... Vivitar ViviCam 5340s Digital Camera

When i press the power button to turn on the camera, the lens does not come out as it should - I get a "Lens Error - will shut down automatically - restart camera" appear on the screen - My Camera is the PowerShot SD1400 IS Digital ELPH - I have only had this camera for a few months

See Lens Error ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Olympus SP- 550 UZ , Model number Sp -550 UZ, L 08208054 UO 18x optical zoom - 28mm wide, Digital Camera DC 6V As soon as the power button is pressed, the screen lights up the lens comes out with a message "Zoom Error" and the lens immediately goes back into the camera. I can also hear light clicking sound as the lens goes back into the camera. This problem has been going on occasionally and then I could see the object to be photographed. Now for the last few days I am unable to take any pictur

... Olympus SP-550 UZ Digital Camera

I have a Canon Power Shot SD1000 Digital ELPH 7.1 Mega Pixels. For some reaons my pics are not downloading. The pictures show on the screeen, but the EOS Utility does not automatically come on the screen. I go to the EOS Program and open, but still nothing is happening. I have uninstalled and reinstalled but this has not made a change. I am in my 50's and not good at this! The camera is awesome and has always worked extremely well. Any ideas? Could something in the camera settings have changed.

The Best solution wud be to buy a card reader writer and transfer the pics using that ... ... Canon PowerShot SD1000 Digital Camera


The camera uses a TFTLCD monitor, which is a high power usage device, any battery that are not high power will have the same results as you do (I have the same camera and done the same with cheaper batterys).I will say go to a supermarket ... Hitachi Digital Cameras

My Canon Power Shot A80 Digital camera goes ON but only shows the screen name Canon then the lens goes back into off - some sounds come on and then E18 shows in the lower left of a black screen. Help.

Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A80 Digital Camera

I have a sony digital camera CYBER SHOT model Dsc -P92.When i switch POWER ON the green light comes. The lens moves out a bit but retracts back.The LCD screen does not come on.The green light switches off.I am not able to shoot pictures?

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\ ... Sony Cyber-Shot DSC-P92 Digital Camera

I own a canon s2 is power shot. Symptoms began with the digital zoom beeping and the screen going blank when invoked to draw an image closer. After a periood of time of avoiding the zoom, the camera lense stuck inside and gave an e18 message when beeping. I could still survey old pics but can't take new pics as the screen is blank and the lense won't come out. The warranty expired 10 months ago, I've tried forced air, changing batteries and mem card and pressing on the lense. The lense is off to

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Canon PowerShot S2 IS Digital Camera

My Optio 60 digital camera powers on but goes to a black screen and i am unable to get it to come back on. Would you please give me assistance on this issue?

CCD failure due to moisture and condensation dont worry they may repair it free of charge bcoz many products are affected by BAD CCD world wide Pentax is also on the list they have also issued service advisory for some models even if u are out of war ... Pentax Optio 60 Digital Camera

My powershot s31s digital camera will not come on. I have new batteries and they are installed correctly. The screen kept going black for no reason and now it will not power on

... Canon PowerShot S3 IS Digital Camera

My fuji finepix s700 digital camera green power light come on but the screen is black

I apologize, but did you check to see if the elexctronic viewfinder is active instead of the LCD screen? There is a switch to the right of the viewfinder labelled EVF/LCD and if you accidently pressed that then the LCD stays dark until that is presse ... Fuji FinePix S700 Digital Camera

Power on . lens comes out . blank screen - Digital Cameras

Now a days, many cameras come with an option to switch off the LCD ( to increase the battery life ). So, check for it. Usually, pressing the 'display' button (if there is one) would solve the problem. ... Digital Cameras

Digital camera I have a cannnon power shota510 digital camera when i turn the power on the screen shows the cannon screen then goes black then it makes a beeping noise then proceeds to shut off i've changed da battery but still cont. to do it

The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try:\015\012\015\012 ... Digital Cameras

I have a HP camera CW450t camera and cannot turn it on with the power button on top. I know the batteries are good because I can turn on the camera with the review button and review the pictures that I have taken. When the power button is pressed the green light on the back of the camera flashes but the lens does not come out and the led screen does not come on. when you take your finger off of the on/off button the green light goes off as well.

Had the EXACT same problem with the CW450 model. I called support because I was mad and wanted it replaced. The support tech helped me through the issue. The answer is- NiMH. Alkaline batteries are unstable and not powerful enough for use with this c ... HP Digital Cameras

EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help

You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera

Dropped camera i dropped my camera and when i turn it on the screen looks cracked and it white! it looks broken on the inside. I have a polaroid i830. One day i dropped it on the floor, and it doesn't work now. If i push the power button on, the power light comes on, but the screen and everything stays off. I also can't get the light to turn off unless I take out the batteries. The screen appears to have a crack. Is there any way to fix it before spending to get a new one ??

My camera fell out of my pocket book and busted the door. I glued it. that worked for about 6 months. I need the door for it and it will be as good as new. ... Polaroid i832 Digital Camera

When I push the power button, the lens cap comes out and on the screen is a very brief shot of what the camera is aimed at. The camera stays engaged for one second and the lens cap goes retreats back into the camera and the power goes off and nothing is on the screen. This happens after the battery has been fully charged also.

Try to remove the rechargeable battery and use a battery of the same \012type but an alkaline like the energizer. Sometime rechargeable battery \012malfunctions that it seems fully charged but actually is not. If the \012camera continue to power on w ... Kodak EasyShare M1093 IS Digital Camera

Press power button, lense doesn't expand out but view screen comes on blurry for about 3 seconds then camera beeps 3 times and screen goes blank, blue power light stays on and camera is locked up, won't do anything without taking battery out and trying again. Anyone have any ideas??? Camera worked 1 hour ago then this just happened. Hasn't been dropped.

Very common problem, you have a bad lens. Unless under warranty the camera may be history. ... Samsung Digimax L730 Digital Camera

Canon S2IS Either screen is dark when I power up the camera. I can see previous images but I cannot record anything. Sometimes I can reboot the camera and it will work for a shot or two, but currently even that does not work. I have changed batteries with no good results. They power up everything but do not affect the recording of pics. Jeff Canon S1IS have problem with dark screen... I have a brand new Canon PowerShot A560 Digital Camera. I put in brand new batteries. On after shooting n

Your camera has the know issue of Stuck shutter, whichhappens after some time (weeks or months) thata camera is notused.\015\012\015\012Unfortunately the repair of it requires a complete disassembly of the camera, including the lens, fix ... Canon PowerShot A560 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4457 seconds