Having problems with your Aiptek MPVR Digital Camera ?

How do i fix a "card protect" warning message


Answers :

Hello

OK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock.

6c99e31.jpg

If\012 the error is still displayed after you did the above, you might want to\012 try the card in another camera.

If\012 the card works in another camera . the problem is with your card reader\012 in your camera.

If you open you sd slot and look inside with a \012sharp light , you should be able to see on the left side of the slot \012there is a little copper or spring steel lever switch. This switch work \012as follows:

1. When no card is inserted / no write protection ,\012 the switch is open and thus the protection is off.
2. When locked\012 card is inserted , the tab is depressed and tells the camera that the \012card is lock.

Contrary to popular belief ,the little tab on the \012sd card is not an electronic switch and does not physically influence \012the card operation itself. If you put a locked card into a camera \012without a sd lock switch , you would still be able to use the card \012normally.

It is incredible difficult to fix this switch because \012of space limitations in the sd card. Look into the sd slot and if you \012can see the switch , use a needle to pull the little tab down toward the\012 base of the camera by about 2mm or until it works being careful not to \012bend it.

If this does not resolve your problem , there might be a\012 short in the switch circuit and the camera will need to be disassembled\012 to resolve this error. This should cost no more than $50.

Please\012 feel free to contact me if you need further information

Kind \012regards
Andrea
Repair Help & Product Troubleshooting for Aiptek MPVR Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The message said "card locked" so I bought a new memory card after several attempts to fix it. With the new card in, the message now reads, "card unreadable"


Make sure you're using an SD card, 2GB and smaller. The M537 won't work with higher-capacity SDHC cards.SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The ... HP Photosmart M537 Digital Camera

256mb Card I have a Camedia Digital Camera C-5050 ZOOM. I have 3 xD cards for it, a 32mb, a 256mb and a 2gb card. The first two work with out any problems, but when i use the 2gb and it asks me to format it I keep getting a message that says there is a card error. This seems to happen with any card size higher than 256mb. Is there anything I can do to fix this?


Maximum card size supported for C5050 is 2GB (CF/Microdrive slot) and 512mb (XD card slot) ... Olympus Camedia C-5050 Zoom Digital Camera

S400 memory card error. Turn on camera - display "NO IMAGE MEMORY CARD ERROR". Can not take pictures, can not display pictures. Have several memory cards - same message, different cards. If the camera can be fixed who can and where should it be sent.


The internal BIOS battery has run down and is causing this error. Don't attempt to fix this yourself. Canon will fix this for you for free, with free shipping, regardless of your camera's warranty status. See and print out the following advisory: ... Canon PowerShot S400 / IXUS 400 Digital Camera

I have formatted an 8Gb SDHC card and when I insert the card into the camera and have it on m-card mode I get an error message Code11 why does this happen and how can I fix it ? Is the camera compatible or do I need a smaller size card ?


The NV-DS65 uses SD cards, 2GB and smaller. ... Digital Cameras

I have a PowerShot A95 Canon camera and when I insert a CF card messgae comes up "No memory Card" and I am unable to re format card. I inserted a new card and same message appeared. Is there a way to fix this please Also, my PC indicates I have no sound device for some reason. I have Wndows XP


What size card are you using? It is a Type 1 card, correct?\015\012\015\012Your computer probably need the sound driver installed (or reinstalled). What make and model is your computer? Or motherboard. ... Digital Cameras

I have formatted an 8Gb SDHC card and when I insert the card into the camera and have it on m-card mode I get an error message Code11 why does this happen and how can I fix it ? Is the camera compatible or do I need a smaller size card ?


The NV-DS65 uses SD cards, 2GB and smaller. ... Digital Cameras

When i insert the xd card i get a message saying card error or card full even though the card is empty. any ideas on how to fix this or is time to replace it.


1) Try and clean the contacts on the card, soft dry cloth. I don't think you can get at the contacts in the camera, but you could give the card port a blast of compressed air if you got a can.2) As the card is empty, try a re-format in t ... Fuji Finepix S5800 Digital Camera

Card the sd card is in but there is a message screen card locked how do i fix this


SD and SDHC cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. ... Vivitar ViviCam 8400 Digital Camera

Additional question... thanks for a reply & possible solution on my concern. i just have another question, i try to open the memory card thru the use of card reader to copy all the pictures in my pc then i successfully capture the files from my memory card but most of the jpeg file cannot preview i think it was corrupted, is it possible to fix those files? another question, what if a message "Do you want to format?" prompt. does it mean i can no longer retrive all the pictures from my memory car


Try all three of the listed programs, especially the third one from VaioSoft. But yes some of the pictures may be corrupted. Not much that you can do then. Also, if you format the card you may no longer be able to retrieve them. Here's the link t ... Canon PowerShot A710 IS Digital Camera

Hi there. i have a canon ixus 30 camera. i brought a brand new 4gb memory card for it. when i put it in the camera it says 'memory card error'. i read somewhere that formatting it helps but when i tried to format it on the camera it doesnt work because the format word is blacked out. i also tried formatting the card on my computer. it formatted it but when i put it back in the camera it still came up with the same error message. what can i do to fix this so i can take pictures etc??????


Many people are unaware that the newer SDHC format cannot be used with most older cameras. Your camera was manufactured well before the SDHC format came out. I'm sorry, but there's no way that a 4GB SDHC card will work with your camera, it just doe ... Canon PowerShot SD200 / IXUS 30 Digital Camera

Card keeps reading memory card full and won't let me take any pictures. Put a new memory card in and gave me the same message.. What can I do to fix..


Format the card. To do this put the card into the camera, turn the camera on. Then scroll through the menu until you find the format function. Format. If it warns you that the card's contents will be erased you must proceed to use the card. If y ... Kodak EasyShare C330 Digital Camera

I have a problem with the sd card in my Trailscout 119900. Anytime I turn it on I get a "no SD card" message. The card is ok and has been checked in other bushnell cameras. Is there an easy way to fix this? Thanks a lot!


Were you able to fix this mine does the same thing ... Bushnell 11-9000 Digital Camera

My camera is years old and I never bought a memory card for it until recently. When insert the SD card, it tells me it needs to be formatted. When I format it, I still cannot take pictures - I get a "card full" message. How do I fix this?


The camera is to old to see the new card,,all you can do is up-date its programing or find an old card ... Vivitar ViviCam 3705 Digital Camera

Memory card error message - I've checked good cards on it (not larger than 2 GB). I believe that there is a problem with the connection of the card to the camera. Is it just a spring type mechanism? Can this be fixed and if so, is it expensive?


The camera might just want you to format the card in the camera. This will erase it so download any pictures to your computer first using a card reader if necessary. Also, check the position of the slide switch on the side of the card. ... Panasonic Lumix DMC-FZ50K Digital Camera

My Canon Powershot A560 memory card is locked and it is the camera doing it not the memory stick.And there is nothing in the manual about how to fix it. When I turn on my camera I get an error message"memory card error" then when i press to view pictures it says the memory card is locked and turns itself off. I have had this camera for some time and have never had issues uploading pictures onto my computer or with the memory card.I really would rather not lose the pictures that are on the camer


Remove the memory card from the camera. Note that there is a small slide switch on one of the long edges of the card. Slide the switch to unlock or lock the card. ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I have an Olympus FE-340 digital camera. About a week ago I got a message that my memory card was full after I had deleted all of the photos in the memory. As soon as the camera was turned on it said, "Memory full." I thought it was a problem with the card so I planned to replace it, meanwhile I was using internal memory. It now says "Memory full" and there is nothing stored on the camera. Is there any way to fix this?


Solved ... Olympus FE-340 Digital Camera

I inserted a 2gb memory card into a fujifilm digital camera A330 and getting an error message "card not initialized." How do I fix?


It wants you to format the card in the camera. This will erase it so if there are any pictures on it, download them first using a card reader if necessary. Then, go into the menu and find "format"...follow the on-screen instructions. ... Fuji Digital Cameras

Display reads "unable to use card. format? yes no." I've had the camera a few years now and never had this problem. I have: 1. tried to format but it still gives the same message 2. tried several other cf and memory stick with same result 3. these same cards still have all the same picture files 4. I checked the troubleshooting in manual I have always enjoyed using this camera and wonder it it can be fixed or if I need to shop again.


... Sony Alpha DSLR-A100 Digital Camera

When I tried to upload photos my computer didn't detect the device and said to be careful removing the camera or the photos could be deleted. When I removed the USB chord and tried to reconnect it to my computer a message came up that says "clean the terminal of the xD card with the dry cloth" I did that and the message keeps popping up. There is another options called FORMAT but when I click yes on format all of my pictures will be deleted...is the only way to fix this to delete my pictures on


1. Stop trying to connect your camera to the computer. Obviously, this is only giving you problems.\0122. Get a card reader. Use it to download your pictures from now on. \0123. When removing anything (camera, card reader, etc.) from a USB port on yo ... Olympus FE-280 Digital Camera

Card Locked After downloading pictures to computer, the camera indicates a message: Card Locked. What should I do to fix this problem.


Hey thomas8833,\015\012 The type of memory card this camera uses is called a SD card which stands for secure digital. On SD cards there is a tab on the side of the card that can be switched between the locked and unl ... Canon PowerShot A550 Digital Camera

We have a Panasonic DMC-FZ20 Lumix camera. We have been using this camera for over 10 years and suddenly, with one memory card (again that we have used many, many times before) have a message, "THIS MEMORY CARD IS PROTECTED" when we want to take more pictures with it. How do we fix the problem??? Your help will be greatly appreciated, Barb Olson


Try taking off the memory card and adjust the small tab on the side of it. ... Panasonic Lumix DMC-FZ20 Digital Camera

Card locked When I turn on my camara I get a message card locked. How can I fix this?


Make sure the SD card's lock slider is in the unlock position.I might be overlooking the simple of it. But sometimes that's all it is.If you can, try another card. ... Canon PowerShot A410 Digital Camera

My Panasonic Lumix DMC-TZ2 camera has a blurred display within 25 seconds of being turned on when in any mode other than playback. When the display blurs, it quite quickly becomes unviewable, and if I try to take a photo, an error message saying WRITE ERROR PLEASE CHECK THE CARD shows on the screen. The card seems fine and pictures I took before today all look good, both on the display and in a computer. Is there any fix, or do I need a new camera?


This is a problem with the camera lens and yes this can still be fix but you need to have it check on a service center but that price will not be cheap so if I may suggest it will be better to get a new camera..... ... Panasonic Lumix DMC-TZ2 Digital Camera

I was able to download pictures using a SHG 18 in 1 Reader/Writer. But then when I put the card Dx 1 Mb back in the camera and turned it on, I get the message "Card not initialized" but I can't format it in camera and I can't format it when I put it back in the reader. I'm a novice who was given this camera for Christmas. I could be doing something wrong that is simple to fix.


The message is trying to tell you that you need to format the card. The\015\012owners manual will have "how to format" information for your camera.If you cannot format the card it could be the card or the camera. The only way to know for ... Digital Cameras

I have tried 3 different Sd cards in my Norcent x125 DCS-760 camera. All 3 times I received a ''card error'' message. What can I do to fix this???


Hi,\015\012\015\012May i ask, have you formated these cards before putting them into your camera?\015\012\015\012If not then the first step is to format your SD card through the camera menu. (Read your camera manual to see how ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2533 seconds