Having problems with your BenQ DC C1030 Eco Digital Camera ?

My C1030 digital camera, which I bought at the end of december 2010, is having a major problem. The lens won't close anymore and when i try to turn it on, it makes a strange noise and it gives a black screen and turns off and still the lens won't get in, it stays out. I tried new batteries, but that's not the problem. Please advise.


Answers :

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous interiors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particles that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for BenQ DC C1030 Eco Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My C1030 digital camera, which I bought at the end of december 2010, is having a major problem. The lens won't close anymore and when i try to turn it on, it makes a strange noise and it gives a black screen and turns off and still the lens won't get in, it stays out. I tried new batteries, but that's not the problem. Please advise.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... BenQ DC C1030 Eco Digital Camera

My Sony DSC-W100 says "Turn the power off and on again" but still wont take any pictures! The screen just stays black. Anyone know what is wrong with it and how much it will be to get it fixed?


Sir, u replace ur memory card ... Sony Cyber-shot DSC-W50 Digital Camera

My Sony DSC-W100 says "Turn the power off and on again" but still wont take any pictures! The screen just stays black. Anyone know what is wrong with it and how much it will be to get it fixed?


Took alot of dropping and banging but finally worked for me too. What I ended up doing was constantly rapping it with my knuckle very fast as it was opening and closing. Second set of doing that and bam, I've got a focus again. ... Sony Cyber-shot DSC-W100 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


This is a hardware problem. Your simptons is tipical of a lens position sensor being faulty.\015\012\015\012There is however nothing you can do yourself. Contact your nearest Sony dealer and take the camera to a Sony service centre. ... Sony Cyber-shot DSC-W50 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


Could not believe it but it worked for me as well. First time I see that a good smack makes it work ... Sony Cyber-shot DSC-W70 Digital Camera

Lens problems I am deployed and I sent my camera to my wife and she has managed to brake it, I was hoping to get some help on this problem: When off, the camera lens is in the position as if it were being used. When turning the Canon Camera Powershot A530 on, the Canon logo screen comes on as it should. Following the blue logo screen is 2-3 rapid beeps made by the camera and a black screen is shown with the words, "Lens error, restart camera". Immediately after showing this screen for five


Try opening your camera, check the lens gear if its teeth are\015\012complete. If so, check if something stucks on it. Its much better to\015\012bring your camera to an authorized service center to re timing your\015\012lens track... ^_^ ... Canon PowerShot A530 Digital Camera

I turn my camera on and all the icons come on the screen but the image stays black. I get playback but I cant see an image when I want to take a picture. Its as if the lens cap is still on but it isnt. I have a Optio MX


Your camera is going to have a sensor that lets it know if the image cap is on or not, its possible the sensor might be damaged, or pressed in, or stuck. ... Pentax Optio MX Digital Camera

When i turn my camera on, it seems fine, all buttons functional. When i take a photo, it flashes, but no photo will pop up in my screen. Instead the screen stays black, and then the battery starts to get really warm. then i cant turn it on or off, the only way to get the batter to stop heating up, is to take it out of the camera. i can put the battery back in, turn it on again, but it will say no pictures had been taken, and the problem continues every time i try and use it. There is no history


FREE INFORMATION REGARDING YOUR CAMERA FIRST \012\012The Stylus Tough-3000 can be submerged up to 10 feet underwater and incorporates four preset underwater scene modes as well as the ability to capture HD movies underwater. It can also w ... Olympus TOUGH3000 Digital Camera

Lens Error I recently had a problem with my Casio QV-R4... every time I'd turn it on, the lens would retract and I'd get a "LENS ERROR" message on the screen. I talked to customer support and they told me that Installing the new version of their firmware, v1.01 would fix this problem. I've since installed the new firmware version, but I am still receiving the lens error. Has anyone else encountered this problem? Does anyone know how to fix it? Please help!!!


As solutions 1 & 2 indicate, lubing the gears works!! This is a great camera, so I hope all of the QV-R4 owners try this. I may become a maintenance item for the camera.\015\012 \015\012I have a few a ... Casio QV-R4 Digital Camera

Black screen Turn on the camera, the start screen shows up, then it turns black when ready to get pictures taken. Tried going through all menus, can see all menus just fine, didnt mess with anything. Tried every setting, still, nothing. Also, can see all saved pictures, and the other lens was cleaned off.


Try cycling through the Display button until you're able to view photo to be taken. ... Sanyo VPC-S500 Digital Camera

Black screen This is the fourth time I have asked this question and I still don't have an answer. My camera turns on but it will not do anything else and the screen is black I've never dropped it or anything I just turned it on one day and that's what happened now can someone please help or is this a problem that cannot be solved and I should just get a new camera?


You need to change the lcd screen but this is quite costly for a repair, better yet change the camera ... Polaroid i737 Digital Camera

Lens problem When I turn on my camara it stays on for only 30 seconds, the blue screen stays on and the lens part wont open ,its stuck,, then the camara just turns back off. Ive replaced my AA batteries and thats not the issue. Someone please help,, christmaS is coming and I needed my camara. Thanks


I had the same problem with my canon powershot sd 400.\015\012The shutters would not shut and the lense was halfway out.\015\012When I turn on the camera, the screen saver stays on, and after a few seconds, it turns itself off.\015\012\015\012I got a ... Canon PowerShot A520 Digital Camera

Just purchased an powershot SX1 IS. I took one photo, zoomed in on it to see how clear the zoom was once taken a photo. THen it switched itself of with the lens still out. Now when turning it on it has a black screen and say lens error...restart camera. I have tried holding func. when turning on the camera and the time comes up on the screen. But as soon as I let go of func I get the error msg.


Hello if you just purchased this unit Then i advise you to take it back, this sounds like a system control issue or main board problem. Holding the function key while turning is factory reset, if this is not working right them the camera has a bad sy ... Canon PowerShot SX1 IS Digital Camera

Whenever I turn my camera on, all my LCD shows is a black screen. I can still take pictures but they all show up as black screens. Also, I can still view all my old pictures that I took before this phenomenon started happening. Are there any suggestions to what I can do to get rid of this problem? Thanks.


Hi, ... Kodak EasyShare M863 Digital Camera

Fuji S9500 Finepix S9500 Camera now (Oct 2012) almost 6 years old. Once or twice has ahd a problem when turning on to take pics (balck screen only) and ahs then recovered when turned on again. But now has stayed with balck screen and onlya limited single blep when turning on. View function still working and settings available, but just black screen when trning on to take photos. Any ideas to fix it? How much migth ti cost to send in to Fuji Srevice? Is 6 years as much as I shoudl expect fr


... Fuji FinePix S9500 Zoom Digital Camera

Blackness? My Canon Will turn on but the screen stays black, any pictures I take are black, and Yes the lens cap is open. The settings still show on the side so the camera is on it just.. stays black


Have you tried reading the instructions? How long did you buy it? Try to press the pad or stick like a button inwards. That is how I get the image to go on my digital camera. Did it work? ... Canon PowerShot A570 IS Digital Camera

DSC-HX5, Lens is Stuck in Zoom out mode. Turn On works but screen stays black. Automatically turns off after 10-20 seconds.


... Sony Cyber-Shot DSCHX5 Digital Camera

DSC-HX5, Lens is Stuck in Zoom out mode. Turn On works but screen stays black. Automatically turns off after 10-20 seconds.


... Sony Cyber-Shot DSCHX5 Digital Camera

I dropped my Kodak EasyShare M530 and now the lens wont retract, when i turn the camera on, the lens makes a click noise and the screen lights up but then it turns itself back off again, with the lens still out, can i fix this myself or will i have to get proffessional help? Any advice will be grateful, thank you.


I have this same problem, but I never dropped the camera. I got it 2 months ago. ... Kodak EasyShare M530 Digital Camera

Pretty much constant but sometimes intermittant problem of the camera fe-210 screen goes black. all functions appear to be normal but it does not see through the lens. So everything is black on the pictures taken. It's like the opening is shut. Sometimes it will work when first turned on for one or maybe two exposures. then it goes black and may stay that way even if turned on and off or changing any of the settings.


Hi,Would you be able to View Recorded images / Video's ?If\015\012\015\012\015\012 yes, this is a Faulty CCD Sensor. This is a Common Problem on almost \015\012all the Brands like Sony, Kodak, Canon. There were Certain Recalls ... Olympus FE-210 Digital Camera

I have a problem with my sony cybershot dsc-w210. i put my battery in and turned it on, the lens came out but the screen was black. but then it just turned off and the lens stayed out and now it doesnt want to turn on. what can i do to fix this...


... Sony Digital Cameras

I have a Cyber-Shot DSC-W120. When I go to turn it on, the screen stays black and the lens just goes in and out, then I get an error message to turn off camera and then turn it back on. This is a new camera and I would like to get it fixed. What can I do to make it work?


Try Initializing the Camera. To initialize the Camera. First, press the Home button to display the Home menu. Then, select the Settings option in the Home menu. Then, select the Main Settings1 under the Settings option and set the Initialize under th ... Sony Cyber-shot® DSC-W120 Digital Camera

My L730 was knocked off the table and seems to have now jammed, when I turn it on it makes 3 loud beeps then the screen goes blank. The power light stays on but it doesn't seem to be attempting to do anything. The lens is still out. I've tried removing the battery and waiting before replacing it then turning it back on and I've also tried gently manually moving the lens but the problem persists. Very Infuriating as I recommended this camera to others, 2 of which have bought one since !! Can anyb


Hello.Your brand of camera has very little to do with your problem. This has to be one of the top digital camera problems of all time. There is a very good solution here on fixya click the link below.And please give the author thumbs up,he's explaine ... Samsung Digimax L730 Digital Camera

Frozen camera Ive had my camera for about 6 months its a Samsung s500 and when i go to turn it on the lens wont pop out nad its liek frozen. The little green light stays thier and the screen is black, and eventually liek 2 hours later the screen turns on but u cant take pictures but you cna review your already takesn ones. Ive tried new batteries, it doesnt work. What should i do?


Your lense is jammed try to put your finger in it and close the lense all the way it might me like hardly closed, i had that problem and now my is open all the way so i cant close it yuo can email me at [email protected] or im makaluso06 ... Samsung Digimax S500 Digital Camera

My camera turns on and shuts off right away, the lens comes outand the screen does it's opening casio thing and the green light is flashing then all of a sudden the screen goes black and the lens goes back in, i fully charged the battery and still get the same thing happening!


... Casio Exilim Card EX-S100 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4282 seconds