Having problems with your BenQ DC E600 Digital Camera ?

When i turn power on it gives me a system error, connects to pc ok


Answers :

Repair Help & Product Troubleshooting for BenQ DC E600 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When i turn power on it gives me a system error, connects to pc ok


... BenQ DC E600 Digital Camera

System error My camera comes up with a system error and does not take pictures. The lens does go in and out when top dial turned to scene but stays out when power button turned to off and then displays system error... I have tried removing card and battery ...any ideas apart from trashing it? Tony


Go to your camera settings and reset what you can, especially the date and time. Take the batteries out if they are old and leave them out over night. Then turn it on and see if the message is gone. If not, then you may need to get service for it ... Digital Cameras

Power surge Hi, Everytime I connect my camera to my computer, the computer gives an error message saying a power surge has occurred on the USB port and so it disconnects the USB port. I bought a new cable to connect the camera thinking that might be the problem but I still got the same error message. Hope you can help!


... Pentax Optio S40 Digital Camera

At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retracts and the camera terns off. i tried to connect with computer and scan for virous, but, when i connect the USB and turn on the camera, the lense retract and tourn off the camera indicating system error 0030.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... BenQ DC E610 Digital Camera

At the start of a device BenQ DC E610, after the release of the target, the message "System Error 0010" will appear and the digital zoom will retracts and the camera terns off. i tried to connect with computer and scan for virous, but, when i connect the USB and turn on the camera, the lense retract and tourn off the camera indicating system error 0030.


Hi and welcome to FixYa,Initially, a few ideas you may want to consider:\015\012\015\012ensure that both the built-in 13Mb and the SD memory card are formatted through the camera's features/options ... Digital Cameras

Error Message Hello! Every time I turn My Sony camera on it starts beeping and and giving me the error message "Turn the power off and on again." I've tried turning it off and back on, along with taking the battery out and putting it back in and even pressing the reset button and I'm still continuing to get the same error message. Any ideas on what I can try next?


I have the same problem ... Sony Cyber-Shot DSC-L1 Digital Camera

Cybershot will not power up it has been charged and i tried removing the sd card and battery then reinstalling them and still no power. It tried to turn on but shut down. Its giving the error messag too Turn off and turn back on!!! and when it does nothing.


... Sony Cyber-shot DSC-W170 Digital Camera

I have Sony Cybershot 7.2mega pixels DSC-W120 and when I turn on the camera it gives this error 'system error' and is unable to capture picture or browse through other pictures. When I turn it off, it tuns on itself. How do I fix this error?


I'll forward a link to a page where you can view the information to troubleshoot \012this issue.\012\012\012\012\012Please click on the link to view the troubleshooting steps then follow all the steps and check if that helps.\012\01 ... Sony Cyber-shot DSC-W120 Digital Camera

My new panasonic lumixDMC-ZS8 14.1MP Digital camera gives me system error (zoom) when I turn it on.the lens will not open?


The systems control board has detected a fault wth the lens, over time dirt and grime collect in the len causing havoc, the other concern is the gears have jammed or got damaged, either way it is a major dis-assembly and it will be expensive. ... Panasonic Digital Cameras

My Panasonic Lumix DMC-FX150 is giving me a SYSTEM ERROR (FOCUS) message as of last night. It says, ''turn off the camera and turn on'' but of course that doesn't do anything. And I've removed the battery and put it back in, but that doesn't fix it. Any suggestions?


I'm not sure if you've gotten this resolved, you probably have - however, others will find this useful. When I left my memory card out the camera worked fine but when I would insert the memory card again, poof: "SYSTEM ERROR (FOCUS)." You can take yo ... Digital Cameras

My Olympus Camedia D-580 zoom when turned says CARD SETUP. If power off, it turns off. If format it says caution erasing all, then says error. I am unable to upload any pictures taken or even take pictures. It seems my camera is "stuck" at this setup screen and doesn't give other options. Alex Mashaw


Try changing its software. It may be corrupted that is why it has all this problems. ... Olympus Camedia C-350 Digital Camera

Unable to download cards from camera. Consistently gives error message that is unable to connect to camera. USB tested successfully with another camera, card tested successfully with another camera. When camera powered up after connection goes to Busy mode and then blanks screen and utility comes up with only one option (Manage files) available.


Oh, reinstalling the software you got, or try another software like Windows Photo Gallery, or another video editing software and 'Import from Camera'.\015\012\015\012Or, you can buy a USB adapter and directly remove the memory stick and manuall ... Digital Cameras

Have a Panasonic DMC-FS15 and get message saying "turn off and back on" followed by "system error (focus)" Have tried taking battery out for length of time and making sure charged, blew on connections for both battery & memory card - still get the same message, plus the lens goes in and out but doesn't go in when camera turned off.


I have this exact problem. I note, your issue is happening at the same time. Weird.\015\012\015\012Tried a variety of other "fixes" but none seemed to solve this issue. Thoughts?\015\012 ... Panasonic Lumix DMC-FS15 Digital Camera

I had the "Access" error when turning on my Sony DSC-W70. The lens would go in and out a few times, and then I would be instructed to turn the power off and on again, which did not help. After reading comments from a few people with the same problem, I tried yanking on the lens when it was out and giving it a good couple of twists. I also took a q-tip with alcohol on it and cleaned all around the sides of the lens. Worked like a charm!


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W70 Digital Camera

Error C:13:10, displays ''access'', ''turn the power off and on agai


Lens jams can happen without dropping the camera. The lens motor is bad, or a grain of sand has got stuck in one of the lens cogs. Either way will need lens repair/replacement. ... Sony Cyber-Shot DSC-S40 Digital Camera

My sony w55 gives error msg which says turn the power off and on agian. i tried to scan my cam's internal and external memory for viruses but it was all clean. it is still not working. plz help me


It is problem with lens mechanism, qualified camera tech can fix it either repairing of lens mechanism or by replacing complete assembly.Thanks. ... Sony Cyber-shot DSC-W50 Digital Camera

When I turn the power on, the lens comes out then gives me lens error 0x0311, then shuts itself off and retracts the lens.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Digital Cameras

I have reset the camera and it still gets the error code 00000018-4489-957-000 when I try to turn it on. It will only stay on while it is connected to the power cord and only stays on for a second then shuts right back off?


I have checked HP references and they as you already know, have no data published for such an error code.\015\012\015\012If you have tried a new battery, and have no luck powering on the camera, I'm suspecting either a problem with the AC adapt ... HP Photosmart R727 Digital Camera

My sony DSC-w55 camera gives me an error "access turn the power on and off again" and its lense does not open when the cam is on


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Sony Cyber-shot DSC-W55 Digital Camera

Canon 1000D Hello there, I'm in China at the Beijing games. my 1000D is giving me a error message 99. can't take picture. I have turn it off and on, take the battery out but the problem still come back after 4 or 5 snaps. please help. I have change lenses and clear the head but not winning. Thanx well i have the similar problem, that i could identify that the camera goes off state after 30 mins, then i found that the display power cannot come, but the camera is working with view finder, if i


Yep set the auto turn off higher and instead of removing the battery, just open and close the battery compartment.This appears to be a problem I have raised with Canon, hopefully they will release a firmware update soon to fix this ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Camera turns on and shows system error (0e02)


... Casio Exilim EX-Z40 Digital Camera

The lens is blocked half way and turning on gives only the indication: "Warning !! Remove Lens Cap!" and "System Error". How to fix it?


I just flick mine open the rest of the way and keep shooting as iv'e dropped min too many times and keep it in a jacket pocket that gets steppd on and rained on so I'm just banking some money for the day I can't just flick it open again. I sell dig ... Digital Cameras

My camara does not take picture, it gives me error "access turn the power off and on again" the lense does not open when the cam is switched on


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Sony Cyber-shot DSC-W55 Digital Camera

I can't turn my camera on,I press the power button,it gives me a whirling noise,the lenses come out(but not all the way),the picture on the screen is blurry,and I can't make a shot,and after2 seconds the lenses come back in by itself.Then it does it again,without me even pressing any button!But I can still view my pictures.But I can't download them on computer,because it still displays an error message D: 5fo8 5e02,and the lenses start moving again.I don't know how to fix it.Please help me.Becau


The camera may be faulty or it needs to be reset to the factory settings.\015\012Try removing the battery leave it out for at least 1/2 hour, then replace the battery.\015\012If it doesn't work then you need a new camera. ... Olympus Stylus 700 / 700 Digital Camera

My sony cam gives me an error "access turn the power on and off again" and its lense does not open when the cam is on


It's likely that the camera needs a power reset:\015\012\015\012http://www.kb.sony.com/selfservice/documentLink.do?externalId= ... Sony Cyber-shot DSC-W55 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3355 seconds