Having problems with your Bushnell 119435c Digital Camera ?

The PIR setting on my Bushnell camera is rotational and has numbers from 1 to 6. What setting will be the most sensitive for animal motion? What does the PIR setting do?

Answers :

Hello. The PIR acronym stands for passive infrared. it is the motion detector. \015\012

\015\012Every time an "event" is detected, the display will indicate "Plr", "EVNT", "rECd" in turn, and the event is recorded on the SD card as a new line in a text file, including the date and time of the event. As long as events are being detected, a new still photo or movie clip (as set in the menu) will be recorded every 30 seconds, indicated on the display by "Plr", "SnAP", then "SAVE".


The sensor that triggers the trail camera is Passive Infra Red, or PIR. Infrared energy is essentially heat energy. The PIR detector operates by sensing a change in the infrared level in its detection zone. This zone is a cone in the center 10 degrees of the camera's field of view. The camera establishes an average long-term infrared level. When this level increased suddenly the PIR detector signals the camera to record a picture and/or an event. Because of this effect, the PIR detector will be more sensitive at night, when the average temperature is lower.
\015\012You can use the red LED indicator on the front of the camera to confirm the detection zone.When PIR is sensed, this "PIR detected" indicator will light. The camera's field of view is a 45 degree cone, centered on the PIR detection zone.

the PIR is strongly sensitive to ambient temperature. The greater

the temperature difference between the environment and your subject, the

farther the possible sensing distance. The average sensing distance is about
\015\01245 ft.

Check the "Sensor Level" (PIR sensitivity) parameter setting.

For warm environmental conditions, set the Sensor Level to "Higher number"
\015\012and for cold weather use, set the sensor for "Lower number". If the temperature is between 56 and 75 degrees farenheit start out with a setting of 3 and experiment to see if it is the best setting under all of your climatic conditions.
\015\0124 thumbs up please.

Repair Help & Product Troubleshooting for Bushnell 119435c Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The PIR setting on my Bushnell camera is rotational and has numbers from 1 to 6. What setting will be the most sensitive for animal motion? What does the PIR setting do?

Hello. The PIR acronym stands for passive infrared. it is the motion detector. \015\012\015\012Every time an "event" is detected, the display will indicate "Plr", "EVNT", "rECd" in turn, and the event is recorded on the SD card as a new l ... Bushnell 119435c Digital Camera

I went to a store and had a look at the Bushnell digital trail camera model number 11-9700. On the box is clearly written that the camera senses game at a distance of 90 feet and that that it is a 2.1MP camera. So I bought the camera on EBay. In the owner's manual on page 4 it is written that the model 11-9700 has 1.3 MP and that the PIR sensor has a range of 60 ft. Please explain. Thank you JCPaquin

As I can see you did not read my email but only want my money. My problem is not a technical one but one of merchandising. Thanks anyway . JCPaquin ... Bushnell Digital Cameras

I have the Bushnell Trail Sentry 11-9302 game camera, 2.1 MP. I went in and entered the password, changed all the settings then powered it down. Turned it back on and now my password doesn't work? How do I reset the cameras password to the default password so I can get back into the setting so I can use the camera?

... Bushnell Digital Cameras

I do a lot of presentatins an my camera is always letting me dow. The problem is the flash doesn't always work. I put the camera on the 'P' setting. I was given the camera for a Christmas Prtesent and unfortunately I have mislaid the instructions so the functions of the settings do not mean anything to me. Can you please advise. The model number is AX480.

"P" is Program mode. The flash won't pop up in this mode unless you tell it to with the manual flash button.\015\012You might be better off starting in Av (Aperture Priority) mode and choosing the depth of field you want via the aperture setti ... Digital Cameras

Animal Eyes When I take a picture of our pets with my camera their eyes come out white when they are supposed to be dark. All of the pictures have been indoors with the flash and the camera set to auto. I'm illiterate when it comes to cameras so could someone help me out! Thanks.

There is a setting on the canon cameras called red eye. Its in the menu and what it does is pops the flash at 2 different times. The first one is a soft low intensity flash this lights up the room and the back ground. The second flash will stop the s ... Canon PowerShot SD400 / IXUS 50 Digital Camera

My Canon EOS Rebel XS digital camera has suddenly stopped taking pictures. It will not focus even though it is on the auto focus setting. The first set of numbers are flashing and there is a flashing dot behind the ISO 800. It was working fine when I used it one time and then the next time it wouldn't. I can view pictures, but cannot take them on any setting except A-DEP and it's not focused even then. Please Help!

Try cleaning the contacts on the camera body and the lens where they meet with a cotton swab lightly dampened with rubbing alcohol. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I own a Canon EOS Rebel XTi. This camera is unpredictable; i.e., I never know when it will decide not to record an image. I have reset it many times to the manufacturer's default settings, and then it SOMETIMES works, but then for some reason stops recording images. I have started to always carry a second camera (a point & shoot). However I am enrolled in a number of photography classes in the new year where I need an SLR. Is this camera issue serious or something I can fix? Thanks.

Okay at least the memory card isn't locked or it wouldn't be taking any pictures. Couple things one is did your format the memory card before using it? Do you format the memory card after downloading pictures to the computer? Do you just unplug the U ... Canon EOS Digital Rebel XTI Digital Camera

Message Display I have a 256MB memory card for my camera. I have not taken many photos. Even at the lowest picture quality setting of 640, the camera reads that I only have 146 images to take. When I try to review what is in the camera, I receive the message "No Valid Image to Play." The instruction manual explains that the message means. However, I was not able to find anything that tells what to do to increase the number of available photos from 146 to more. This problem happened once

You should have the full instruction manual!! ... Panasonic Lumix DMC-FZ10 Digital Camera

I have a bushnell 119512B digital land camera. i cannot set the date, i have set the other 4 but it keeps going back to default on the date

... Bushnell 119455c Digital Camera

Hello ,regarding my dx4530 camera , the camera turns on fine but the view screen is dark, almost as if the lens cap was on , the picture number along with the flash settings show on the screen but dark the background is dark. I can review old pictures. If I take a picture now they show up as blank. Any suggestions? Thanks in advance for any comments or solutions

You are having problem with the lens... you need to change the lens to get a bright picture... ... Kodak EasyShare DX4530 Digital Camera

The top (monochrome) LCD on our Nikon D80 recently broke. I think that it is actually called the "Control Panel," and displays settings, battery life, number of pictures remaining, etc. Please note that this is not the 2.5" color LCD on the rear of the camera. I know that it is merely the LCD because the backlight works, as does portions of the LCD display itself. Does anyone know of a guide or video to perform this repair? Also, does anyone know the part number? I plan to call Nikon tomor

Hi Jason. First of all, depending on the age of your camera and the warranty you purchased, this camera may be under warranty which would result in Nikon fixing it for free. \015\012\015\012Here is a free downloadable manual for your camera ... Nikon D80 Digital Camera with 18-135mm Lens

Owners manual I am looking for an owners manual for a digital concept digital camera model number DF071300829. It was given to me and I don't have any information on how to read the setting and what the camera can do. I would like to download the manual for free or a small fee. Please let me know what to do. Thank you. Kathy

Could you tell me what is the make of your camera? ... Digital Cameras

Bushnell trophy cam. Mod-119405. I have only had this cam for 1 1/2 to 2 months. When I turn on to the setup mode, the screen light comes on but nothing else, It woun't take pictures or vids. I have put in 2 new sets of Energizer batteries and still nothing, the sd cards are the same 4 that I have been using in it, and they work fine in my other camera and Bushnell scout. What is the problem

... Bushnell Digital Cameras

My vidio camera set up dics does not have vista, do you have updates. Name on my camera VP-D190i number 67JT700262A. Can yiu help.

Hi,Pls try ... Digital Cameras

I have an olympus FE-290, and my sister borrowed it for a trip but when she brought it back the camera was messed up. it turns on but the screen is black except for information about the number of pictures left, what picture setting its set on, and what the pixel size is. any help on what i can do to fix it?

I would try looking in the settings to see if the view finder option is enabled or disabled. I would also ask your sister if she change any of the settings. ... Olympus FE-290 Digital Camera

I need to know what model my bushnell camera is but all i have is the serial number

... Bushnell Trail Sentry 11-9200 Digital Camera

I was given an Olympus camera Model:C-350ZOOM(E)2 with camedia 4.1 set up but do not have the 'master serial number' to be able to install it. Please help

To learn about the new and free version of Olympus Master 2 software go to: http://www.olympusamerica.com/cpg_section/oima_softwareMaster.asp ... Olympus Digital Cameras

Pentax E30 Digital Camera: When I take pictures under the sun or even at dusk, the pictures are too bright or pure bright with no image at all. I can only take normal pictures during nighttime. I have tried to change the settings, the white Balance, EV compensation and sensitivity, it still wont' work

Its sound like if the iris motor wont go to the good position its could be the light sensor thats needs to be tested...\012?\012\012hope that give you an idea\012regards Alan ... Pentax Optio E30 Digital Camera

My camera takes pics without any movement infront of it. I set it up in my closet and it still took pics at random over the 30 minutes in there it took 17 pics. Longest time in between pics was 9 minutes. Is there a way to fix the sensitivity?

Scroll thru setup menu and make sure you don't have it in time lapse mode...if it is, it will automatically take a pic every whatever time time lapse is set for.If it is, set to default and reprogram. ... Moultrie GameSpy 4.0 Digital Camera Deluxe

RI have a bushnell trail camera manufactured 07/09/12 with serial number 930205821. It hasn't worked right since we bought it but now it won't record pictures onto the memory card. It just gives an error message on the screen EUNr rECd. Help please, we only took maybe 100 pictures since we bought it, its still new. Thanks Rob

... Bushnell Digital Cameras

I set a password for my bushnell out door camera but now it says "erro" whenever I try to use it and the default doesn't work either. Is there a way to reset it.

Definitely there will be a way to reset ..............you check whether there is a small hole .........if yes use pin to reset ... Bushnell Digital Cameras

I need the owners manual for a Bushnell Trail Camera model number  11-9305 Cannot find on here.

My model was actually 11-9035.... ... Bushnell Trail Sentry 11-9200 Digital Camera

Can't download manual for M753 even though I type in the numbers and hit confirm nothing happens. M753 digital camera used to take great pictures but lately on the same setting some pictures are fuzzy while others are clear. Help!

Hi,\015\012\015\012You can download the user manual from the manufacturer's website by clicking this link\015\012 ... Kodak Easyshare M753 Digital Camera

Frame full My fujifilm finepix camera keeps saying the frame no is full even when i change the settings to renew frame number

I had the same problem with a fujifilm camera, the good news is that it's easy to fix. On the shooting menu (press menu when the camera is in shooting mode) there will usually be a set-up option, within that you should see "Frame No." or something si ... Fuji FinePix Z5fd Digital Camera

I have just purchased a Bushnell Trophy Cam Model 119450. It will take one photo of a moving subject, then only records at the time interval rate ie every 2 minutes or whatever interval is selected. The result is that I end up with hundreds of images taken every 2 minutes (or whatever time interval is selected) but with no images of the animals I am attempting to photograph. I am using the cam in a remote location in India and I am very disappointed with the performance of this camera. Please he

Hi.\015\012\015\012Ensure that camera is on On mode.\015\012\015\012You need to set the parameters for camera mode and triggering interval time. Next, switch to the ON mode. And then the device starts monitoring automatically\015\012Try g ... Bushnell Trail Sentry 11-9200 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 2.1670 seconds