Having problems with your Bushnell Trail Sentry 11-9200 Digital Camera ?

Bushnell Trail Sentry camrera will not accept any code

\015 I have a Bushnell Trail Sentry digital camera as a Christmas present. I am not able to set the code, I had trouble getting it to even take the default code the 1st time, then finally it did. One time I tried to enter a 4373 code but switched it back, afraid I would forget it. I turned camera off after 154 pictures, removed SD card and then tried to restart camera per directions. It will not take 0000 code or 4373 code. It goes to "erro" after each round of entry and then goes to off. I am lost for what to do. I did have trouble the initial time with it. After multiple tries the 1st time it finally went thru which made me think there may have been an issue with the camera. What can I do? Any ideas?\015

Answers :

Maybe take it back to shop or better to send to manufacture they will fix it i guess for a small cost ..DO NOT just dump it on ebay or trash item why not give the manufacturer a change to be good responsible company and fix or replace item for a small fee
If the Bushnell Trail Sentry 11-9200 is turned on without an SD Card in place, it may need to be reset. Reset it by pulling one of the batteries out partway, insert a new or empty SD card, and put the battery back in place. Read this Set Up Guide for instruction how to set up your passcode.
\015\012
\015\012The camera will not Make sure the power is off before installing or removing the SD Card. If you forget, you need to do the reset procedure above.
\015\012
\015\012Buy Name Brand Trail Scouting Cameras here.
Repair Help & Product Troubleshooting for Bushnell Trail Sentry 11-9200 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bushnell Trail Sentry camrera will not accept any code


Maybe take it back to shop or better to send to manufacture they will fix it i guess for a small cost ..DO NOT just dump it on ebay or trash item why not give the manufacturer a change to be good responsible company and fix or replace item for ... Bushnell Trail Sentry 11-9200 Digital Camera

Trail Sentry won't accept password - Bushnell Trail Sentry 11-9200 Digital Camera


You have to contact the manufacturer to get the password reset.Password recovery can be facilitated by contacting Bushnell customer service \015\012line at 800-423-3537 pressing option 2 in the main menu. Your units \015\012serial number ... Bushnell Trail Sentry 11-9200 Digital Camera

I have a Bushnell Trail Sentry game camera and it will no longer take pictures. When I enter my code the number 5860 appears on the screen, then the word "snap" and then letters SLP appears and nothing happens. I have put new batteries in it and a new memory card and still it will not take a picture. What do I need to do now?


... Bushnell Trail Sentry 11-9200 Digital Camera

CODE EUNR IS COMING UP - Bushnell Trail Sentry 11-9200 Digital Camera


... Bushnell Trail Sentry 11-9200 Digital Camera

Bushnell trail sentry master password reset - Bushnell Trail Sentry 11-9200 Digital Camera


... Bushnell Trail Sentry 11-9200 Digital Camera

How to rest bushnell trail sentry


... Bushnell Trail Sentry 11-9204 Digital Camera

Bushnell Trail Sentry Digital Trail Camera


I can solve these issues in about 2 minutes. email me @[email protected] ... Sony Cyber-Shot DSC-V3 Digital Camera

Bushnell Trail Sentry Model 119320C Problem


Maybe the deer are turning the the camera off.they are pretty smart .just kidding ,im a minnesota deer hunter,and i have downloaded the manual for this camera,and am currently looking for solutions,as far as formating the card ,you need to know what ... Bushnell Trail Sentry 11-9200 Digital Camera

My Bushnell Trail Sentry camera won't turn on


... Bushnell Trail Sentry 11-9200 Digital Camera

Bushnell Trail Sentry Model 119320C


Hello. Your camera is suffering from exposure to the elements and must go to the shop for treatment. Here is the info. you need to get it to a service center asap. ... Bushnell Trail Sentry 11-9200 Digital Camera

Bushnell Trail Sentry is locked on flashing SD card icon


... Bushnell Trail Sentry 11-9200 Digital Camera

How to format a trail camera - Bushnell Trail Sentry 11-9200 Digital Camera


I'm sure the Bushnell Trail Sentry User Manual can help you with this. See -Setup and Operation Guide - If the Sentry is t ... Bushnell Trail Sentry 11-9200 Digital Camera

Bushnell Trail Sentry Digital Trail Camera


To reset the password:Turn unit on and wait for password promptDepress the and hold the enter button until cameraswitches into 5-digit password mode _ _ _ _ _.Trail sentry systems will not indicat ... Digital Cameras

My bushnell trail sentry worked fine for a couple times


... Bushnell Trail Sentry 11-9200 Digital Camera

Bushnell Trail sentry camera


... Bushnell Trail Sentry 11-9200 Digital Camera

Forgot password on bushnell trail sentry game camera


If the Bushnell Trail Sentry 11-9200 is turned on without an SD card in place, it may need to be reset. Reset it by pulling one of the batteries out partway, insert a new or empty SD card, and put the battery back in place. ... Bushnell Trail Sentry 11-9200 Digital Camera

I have a Bushnell Sentry Model 119303 and it is password protected and I set it up and now it won't accept the password, is there a way to reset password? Elaine


Here is the sollution turn the unit on and hold the enter key untill four dashes are displayed then enter 66214 the digits will not display but the last four digits so dont worry about that and hit enter the word pass will be displayed and you can co ... Bushnell Digital Cameras

My trail sentry will turn on but not allow me to enter my security code; what do I do?


... Bushnell Trail Sentry 11-9200 Digital Camera

I got a new Bushnell Trail Sentry 5.0 mp and I can't get it to work. I must have entered a password and not know that I did. Is there a way to set the password back to default. I got past the password to go to the menu and now once I turn it on, it errors when I enter 0000 as the password. Can you help me, please.


I have the same problem the only solution I have been able to find so far is that you have to send it back to Bushnell with Proof of Purchase and they will reset it.\015\012\015\012Fuzzy ... Bushnell Digital Cameras

My trail sentry will not let me reset the code


Normal\015\012 0\015\012 \015\012 \015\012 false\015\012 false\015\012 false\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 MicrosoftInternetExplorer4\015\012 \015\012\015\012 \015\012 \015\012\015\012\015\0 ... Bushnell Trail Sentry 11-9200 Digital Camera

Reprogram password on 119320c - Bushnell Trail Sentry 11-9200 Digital Camera


... Bushnell Trail Sentry 11-9200 Digital Camera

Flash will not work - Bushnell Trail Sentry 11-9200 Digital Camera


... Bushnell Trail Sentry 11-9200 Digital Camera

Cannot remember password - Bushnell Trail Sentry 11-9200 Digital Camera


Hi\015\012\015\012The default password on this camera is “0000”. If you have not changed the code you should be able to bring it back to life with this code,\015\012\015\012If you previously changed the password in ... Bushnell Trail Sentry 11-9200 Digital Camera

Forgot password - Bushnell Trail Sentry 11-9200 Digital Camera


I have the same problem. I think I can break the code because I think I know 2 of the numbers, but this camera is an accident waiting to happen like this because you think you're setting the time or something and it is the password and then you're sc ... Bushnell Trail Sentry 11-9200 Digital Camera

I have the Bushnell Trail Sentry 11-9302 game camera, 2.1 MP. I went in and entered the password, changed all the settings then powered it down. Turned it back on and now my password doesn't work? How do I reset the cameras password to the default password so I can get back into the setting so I can use the camera?


... Bushnell Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0377 seconds