Having problems with your Canon Digital Cameras ?
I have a canon powershot A640 when you press the on button it wil
\015 I have a canon powershot A640 when you press the on button the light flashes and it will not stay on. Not the battery, it just flashes and stays off.\015
Your problem may be due to corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the\015\012batteries and wipe the camera contacts firmly with\015\012a dry cloth (heavy corrosion may require cleaning with a wire brush,\015\012steel wool, or sandpaper). Remove any residue that may have fallen\015\012into the battery compartment during cleaning, then wipe both ends of\015\012the batteries and place them back in the camera. This cleaning clears\015\012the problem about 90% of the time. If it doesn't work for you, chances\015\012are that your camera may have\015\012a problem that requires professional repair.
Repair Help & Product Troubleshooting for Canon Digital Cameras
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have a canon powershot A640 when you press the on button it wil
Your problem may be due to corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the\015\012batt ... Canon Digital Cameras
Brand new (one hour old) Canon Powershot A490 looks like it has a software bug. All the buttons used to work but now no button responds except fpr the left button when one of the two bottom buttons (camera and menu) is pressed. Pressing one of the latter then pressing the left button constantly cycles through the menus.
Obviously, you have a defective camera. Don't try to fix it or you may void the warranty....send it back. ... Canon PowerShot A490 Digital Camera
Canon PowerShot A480 won't take photo. Pressing on button camera on then pressing silver button to take photo when pressed down screen turns black no picture taken. Batteries new. This is the story; camera was working fine then showed low battery bought new batteries took couple of photo's showed low battery again. Replaced battery same thing again but now when pressing button to take photo screen goes black. Camera bought 30/9/2009. Any idea's????
Its just a matter of batteries...some are not powerful enough to operate the camera ....Try to change them and buy some real good ones..like Duracell or Tatra...do not make any compromises when buy the batteries...get the best cause these kinda camer ... Canon Powershot A480 - Silver Digital Camera
Canon a80 dear hi, hope u all r well. please help me to solve the problem for the canon powershot a80 which suddenly got dead.when i press the power switch it takes around 150 ma of current till i keep power button pressed.no light comes on.After releasing thepower button the current goes down to zero. please help me.i m an electronic technician.this is my personal camera.thanks my email [email protected]
Here are some simple things to try first for a camera that won't power on:\015\012http://camerarepair.blogspot.com/200 ... Canon PowerShot A80 Digital Camera
I connect my interface cable to the usb & to the digital terminal & turn the camera on & a red light (not blue) appears beneath the menu button. no menu appears, even if i press the menu button. how do i transfer images? canon powershot sx 10 is
Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Canon Digital Cameras
Lens restart error on my Canon Powershot A460. Lens has come out and shutter cannot be closed, inspite of battery & card being removed from it. How ever many times I tried switching ON/OFF button after loading my recharged(may be partially charged) battery, it's not showing signs of recovery. Just one beep sound , a blue screen written Canon & a black screen written "Lens Restart error" comes alternatively according to the pressing of ON/OFF button.In this alternative cycle, for one cycle, a gre
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A460 Digital Camera
My Canon PowerShot SD780 IS will not turn on. I purchased another battery to make sure that wasn't the problem and it isn't. I have tried pressing the power button and OK button simultaneously for a few seconds and that hasn't helped. The power light doesn't turn on, the lens doesn't open, it doesn't even beep. I desperately need help and would really appreciate any advice. Thanks, Vanessa A.
... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera
I had downloaded pics on my computer few days back but today suddenly my camera,canon powershot sx100 is not talking to the computer...both of them are only months old ...on the screen of the camera comes a message "communication error " as soon as i press the play back button on the camera.... the computer does not show the presence of the camera thru USb
Check that you have the correct driver installed for your operating system. You can download it from Canon ... Canon PowerShot SX100 IS Digital Camera
My Canon powershot G10 switches itself off showing the last picture taken for a few seconds when I press the Preview button. The battery is Ok and it still can take photos. Very strange! Many thanks for your help!
... Canon PowerShot G10 Digital Camera
The lens in not retracting on my canon powershot sd 1400 is ,when I press the on /off button
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera
Hello, I have a Canon powershot SX100 IS, and everytime i turn it on it beeps and says on the screen "lens error, restart camera". I have tried tapping it, shaking it a bit. turning on and off. Put in new batteries, taking memory card in and out. Turning it on at different angles. Connecting to the computer. But nothing is working, it wont even let me look at the photos when i press the play button, and that doesnt even require opening the lens! please help! thankyou.
Try these procedures. ... Canon PowerShot SX100 IS Digital Camera
I bought a canon powershot SX200 IS but the flash is permanently disabled. I've tried pressing the enable flash button on the round dial on the back of the camera in each setting but it still wont enable. Help?
There is a sensor that detects whether the flash has been raised or not. It seems like this sensor has malfunctionned and is telling the camera that the flash is not raised; this is causing the flash to be disabled.\015\012\015\012You mus ... Canon PowerShot SX 200 IS Digital Camera
My Canon Powershot A630's flash won't work. Basically, you press down the shutter button and the little red light goes off, but no flash, and it won't take the picture unless you turn the flash off.
I was having the same problem... \015\012\015\0121. I took off the two screws on side closest to flash\015\0122. Removed side cover\015\0123. Gently wiggled the round silver capacitor at the top that is wrapped with a black fi ... Canon PowerShot A630 Digital Camera
Canon Powershot S1IS Viewfinder will not display image to be photographed. I have pressed the Display button but no success.
HI,Please confirm it that camera does not show live image to take picture and does it playback / show previously stored picture on memory card? Do you see Menu on LCD?If thats correct then camera has bad ccd imager problem. CCD Imag ... Canon Digital Cameras
My canon powershot sd630 is very slow to take the picture after i press the button?
You need to press the shutter button half-way and allow the camera to lock in the focus (it will beep) before pressing the rest of the way. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera
My frind dropped my camera and my lens broke. It is a canon powershot SD600. When i turn it on it says lens error, press reset button. lens is stuck slanted-ly.it also is blurry wen u c the screen. "my friend" doent want to pay for it , so where can i go fix it and how much would it cost ?
Hi Dear,As we can see from your description of your problem. The issue is related to misalignment of the lens. As the lens is stuck it will not come in and out smoothly. And also as you have said the camera lens is broken. Hence, the best ... Canon PowerShot SD600 Digital Camera
My Canon PowerShot A85 switches on the lens rolls out as per normal. The screen is normal, showing whatever you are poiniting the camera at. However the the Red LED below the flash is permanently on, the zoom lever is not active. Pressing the photo button gives no response. The LED above the screen is permanent orange.This is any mode. I have changed the memory card as a precaution as well as the batteries.
The function switch may have come loose or is faulty ... Canon PowerShot A85 Digital Camera
I accidentally pressed the formatting button on my digital camera, canon powershot SD790 IS. Not knowing it erases all pictures. My question is can i get my pictures back, and if so how?
The answer is it depends on whether or not you conducted a "low level" format or not. Such a format will actually write over the card making photo recovery unlikely. But with Canon cameras, format is normally a quick erase (which is recoverable), U ... Canon PowerShot SD790 IS Digital Camera
I have a canon powershot A520 and i had really good pics of my daughter on there and i pressed the "format memory card" button not knowing what i was doing does that mean i erased them all..? because it says "no image" now
Get yourself a SD memory card reader ie one that plugs into a USB port on your computer, and download one the many digital picture recovery programs available freely from the internet,Try a google search for - digital picture recovery software ... Canon PowerShot A520 Digital Camera
I cannot see the screen on my canon camera powershot sd1100. pressing the disp button doesnt help.
... Canon PowerShot SD1100 IS Digital Camera
My canon powershot sd750 digital elph will not power up when i press the power on button. please help.
... Digital Cameras
I have the Canon Powershot SD1200 IS. the functions: Disp., Menu, Func. Set do not work. nothing happens when i press them. When I hit the play button it keeps going through all my photos very quickly. and the 2nd green light blinks quickly. Not one by one manually. It doesnt matter if the camera is on auto or camera. nothing works. On the digital screen on the botton left there is a symbol of a rounded triangle with an S and bottom right there is 9999 when i change it to manual on the upper lef
Try this...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera
My Canon Powershot SC1100 IS, Digital ELPH, has always been great. a problem occurred. the camera said, card locked. I took out the SD card and pushed the switch up. then it was ok, except now I cannot use the view finder?? the display one. it works in video mode but not for taking photos. is there a button to press to make it work again?
... Canon PowerShot SD1100 IS Digital Camera
I am having problems with my Canon PowerShot SD1300 IS IXUS 105 Digital Camera. when i am in the playback mode, looking through pictures, the screen will cut off at the last picture (when instead, it should just go straight to the first picture). the lens does not retract and if i press the on/off button, the camera turns back on, but then cuts off again whenever i'm trying to look through pics. I can't figure out if I need to send it back and exchange it or what. Please help me, thank you!
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera
I have a Canon PowerShot SX100 15, and when I press the button to turn it on, it beeps 3 times and the message lens error restart camera comes on, and then it shuts itself off. I put new batteries in it, that didn't help.
Hello, Your camera's problem is the lens itself. There is something making it stuck, this problem can't be repaired. Take it to Canon or a reliable camera store to get it fixed. ... Canon Digital Cameras