Having problems with your Canon Digital Cameras ?

I think I need an update, but I can't find it. I am running Canon FS11 on Mac Snow Leopard (10.6.3). It has worked in the past, and the report says that there is a software problem. Thanks


Answers :

Http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=2547&modelid=16183
select the model and the operation system ...when you select the model (if needed I selected it but it seams sometimes it only direct to the download location and needs selected again )
so ..when you select the model select the camcorders..and than the standard definition flash memory camcorders...and you will find it in the list ..also select the last category in the right drivers and downloads..and all you need is to select the Operation system ..for Mac OS x there are updates available ..even in the first line for Mac 10.6 ..
Have a nice day !
Repair Help & Product Troubleshooting for Canon Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I think I need an update, but I can't find it. I am running Canon FS11 on Mac Snow Leopard (10.6.3). It has worked in the past, and the report says that there is a software problem. Thanks


Http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=Do ... Canon Digital Cameras

I installed S3000 software for Windows XP on my Windows Vista. Now it won't run. I downloaded the driver fix for Vista but something is blocking the program from running - it says: Windows 4.1 has stopped working. Can't get past it. Need to get these pics of my camera and emailed out for a job bid! Finepix shows all of my pics just fine, it just won't upload off my camera. Please help!


You don't need the software to download the pictures fromthe camera to your computer.\015\012\015\012The pictures are on the memory card in the camera. \015\012\015\012Two ways to get them:\015\012\015\012If you c ... Fuji FinePix S3000 Digital Camera

Hi I have a Canon PowerShot 460 Digital Camera and it works great when I want to take pictures or make movies. The problem is that when I try to connect it to my computer to retrieve the pictures on the camera, my computer says that my camera isn't detected. I don't understand why that is because the camera's software works fine. I thought it was a problem with the USB cord, but it works fine with other electronic devices. The USB doesn't seem to work with the camera. I don't get whats the iss


Plug the camera up in the normal way and take a look at 'My Computer'If the PC is seeiong the camera it will indicate this by 'putting' up a new Remoceable drive Icon- If it has work at it from there.If it did nmot - Remove the Camera so ... Digital Cameras

Have old Olympus D-510 and Camedia Master 2.5 Software. Used software back with old Win98, then new computer to Win XP, downloaded update for 2.5 to work with XP. Now have another new computer with Windows 7. Question no. 1 - A friend who is a computer technician told me I dare not download any older software programs as they could ruin Win 7 operation. He said go to websites and download new software. Got to this site it says it can run a scan and replace driver or whatever is needed, but


Your friend is correct...you could cause problems trying to install an old software program on Windows 7 (although it probably would just reject it). Windows 7 sometimes comes with photo editing software already loaded. If not, there are free program ... Digital Cameras

Kodak Easy Share camera - I'm using ScanDisk as a device to plug my memory card into and transfer pictures. I somehow got it to work once, but Kodak Easy Share usually tells me "no device detected". My control panel tells me the device is there and working fine. I tricked it once by reinstalling and Easy Share software actually allowed me to download my pictures (last night). Today it is saying no device detected again, and nothing seems to work.


I bought a 4gb scandisk sdhc card and my camera wants to format the disk but it won't ... Digital Cameras

I have recently purchased the NX2 software, and as recommended changed the setting on my D70s from JPEG fine to NEF (or Raw). In the past I have downloaded files using either Nikon View software or the Microsoft download wizard. But the Microsoft wizard tells me their are no pictures on the camara, and Nikon View software transfers the first two images then encounters an "unexpected problem", and when I try again it says "an unexpected error occured. Try again. This just repeats. Can you help?


Try Nikon Transfer at http://support.nikontech.com/app/answers/detail/a_id/61.You can also download a codec from Microsoft that makes Windows recognize NEF files. ... Nikon Digital Cameras

Memory Card my camera displays "this card cannot be used" or "Warning! this card cannot read" when it was working fine for the past few months.. I don't know what's wrong with it, the manual says what to do, but when I do it, it doesn't work.. I can't take any pictures with my memory card in now.. but without the card I can take up to five pictures.. which is dumb because it was working fine before.. and i did nothing wrong to it..help?


Maybe you need to buy a new card for your camera, the card was now defective and could not perform to the normal function.. ... Nikon Coolpix L11 Digital Camera

My Dad has a Polaroid Digital 320 - S/N049PS08N072080 Camera. The software that came with it will not load on our computer. We have WindowsXP, the software says for Windows 95 & 98. We need software that will work with Windows XP and we need the cord that goes from the camera to the computer. Can you help me with this?


XP drivers here.\015\012http://www.polaroid.com/service/software/photomax/fun320.html\015\012\015\012Manual here. will tell ... Digital Cameras

My kodak easyshare c183 computer downloader isnt working on my camera it just says open my computer run the kodak software downloader but whenever i clink on it,it doesnt work


Having gone two months without a response, I assume my suggestion to use a card reader solved the problem. ... Kodak Easyshare V1233 12.1MP Digital Camera with 3x Optical Zoom

Hi I have a Canon A460 which has worked fine. My problem is with the transfer of images to the computer. I get either a message saying camera not found or I get a message saying camera detected with a box underneath where I would expect to see zoombrowser or another software to launch the action. The box is empty so I can't select anything. This has only just happened recently. Probably around the time I installed a Canon MP270 printer/scanner (which is a pig to use). Thanks Pat


Well, obviously your registry has changed and your camera is no longer recognized. No problem....just get a card reader and use it in place of your camera. That's what the pros do. ... Canon PowerShot A460 Digital Camera

When I try to take a picture, it says memory full. But, when I try to look at the memory it says no file. I tried using the disk, installing software, formatting it.. Nothing works. The SD memory card is used, but has no pictures on it. Its driving me insane.


Format the SD card make sure the camera is set to place the new files on the SD card and not go to the internal memory. What I fully expect is the camera has defaulted to using the internal memory which is now full of files/pictures and needs to be s ... Vivitar ViviCam 8025 Digital Camera

I have a digital Canon IXUS 75. When I connect the camera to my laptop using the USB port and then turn on the camera- nothing happens. The software is installed successfully and it has been working fine for the past two years then all of a sudden - it doesn't work! any assistance would be much appreciated...


Download another driver for yours. A glitch in the computers hard drive may have wiped it out partially\015\012Free drivers are availble such as this one below\015\012\015\012 ... Canon FS100 Digital Camera

I got a Nikon D3000 for Christmas. I am unable to get the Nikon transfer software to work. After plugging the camera into the computer the computer asks which program to open and I select Nikon transfer. It acts like it is going to open the program but all Nikon transfer will do is say preparing to start up the application. I have uninstalled, used Nikon registry cleaner, reinstalled, and downloaded the update none of which worked. Please help! I have scoured the internet for answers with no luc


Consider NOT connecting the D3000 to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the ... Nikon D3000 Digital Camera

I have a Vivicam 35. Software on the disk didn't work so downloaded software from the internet. I see an image on the computer and can take pictures when plugged in but when I'm unplugged and take pictures then connect it says that there aren't any pictures...


Vivitar 8025 cd they gave me to small for computer ... Vivitar ViviCam 35 Digital Camera

Battery Problem I bought a Nikon Coolpix L12 Digital Camera this past summer and have had no problem until last night. My camera turned off and said "battery exhausted." After changing the batteries twice with new batteries, the lens would open for a second then close and the camera turned off once again saying "battery exhausted." I don't know what happened. I had same problem. No matter how many times I have changed batteries, It works for a second then closes with signal saying "warning batt


These cameras have a internal battery that holds data for the camera to keep its settings. These batteries can be replaced but the camera has to be disassimboled to change it they should be able to be changed at a local camera shop pretty cheap. ... Nikon COOLPIX L12 Digital Camera

Software Installation I recently went out and bought a Pentax Optio SV. It has 5.0 megapixels, and 4.0x zoom. Camera works fine, all that jazz, BUT its the connectivity issue. Pentax has a software that comes along with it that is obviously outdated by a longshot, and when i go to install this ACDSee for Pentax, I try to install but it just says I need Windows Media Player 7.1 or higher to continue, but i have windows media 10.0. Then, I thought i might be tricky and just insert the SD card into


Pentax camera creates an own folder at each inserted SD card. So, try to find your image and video files in the folder named 100PENTX.\015\012\015\012For example, my camera saves the shot images into folder:\015\012\015\012SD card:\\DCIM\\100PENTX. ... Pentax Optio SV Digital Camera

I have a dz-mv100e camcorder. it didn't come with software (secondhand). I have downloaded driver from Hitachi and a generic udf reader. also power directory editing software which seems to recognise it to retrieve files for editing. the files are .vro extension. when working with editing program says it is not compatible and impossible for me to burn. I go to burn to dvd and my computer shuts off. any help please??!!


Good Day,\015\012 \015\012What is VRO? VRO is DVD Recorder File, i.e. DVD Video Recording Format streaming video file. An associated Several manufacturers use .VRO / .IFO files. This is a new specification ... Digital Cameras

Kodak Z1015 Brand new Kodak Z1015 camera. I take three shots and a message appears on the screen saying "PROCESSING". At this time the camera is inoperable. 40 seconds later the message goes and I can take another three or four shots, then same all over again. Kodak as much use as an ashtray on a motorbike. They say I must take a download from the Easyshare software, but that won't work. Any suggestions? Cheers, Dave Watts.


Have you tried downloading updated firmware. Also this camera is slow in processing photos(especially if you use the Smart Capture mode. Hope that helps ... Kodak EasyShare Z1015 IS Digital Camera

My canon ixus 860 is is a year old. Donloads have worked perfectly up until now, using the canon browser. Now, suddenly, when I connect it to the HP laptop for downloading pictures, it says that the camera is not connected and to retry. Have tried several times but it is not working. Have uninstalled and reinstalled the software, as well. Your suggestions on how to solve this are appreciated. Kind regards, MJB


Hi there,There is a way -You need to restore your operating system to a back point.If you are using Windows XP than follow the below link to restore it -http://www.microsoft.com/windowsxp/using/helpandsupport/getst ... Digital Cameras

I cannot connect to my camera. I have installed the software but when i plug my camera in it says check the connection. This is the second camera i've tried, both say the same thing. My usb port is working properly.


Connect the camera and the push the switch by which u see the photos on the camera screen ... Canon Powershot A480 - Silver Digital Camera

I have a Canon 400d and have recently photographed a wedding. Most of my normal work is for a picture agency which I have been supplying with work for the last four years. I recently had some photos rejected due to excessive noise. The photos were taken on a setting of 200asa which in the past have been ok. The wedding I recently shot, the photos were again very noisy and due to the weather all the shots were taken inside at a hotel. I would say the majority of the shots were at least o


... Canon Digital Cameras

Every time I try to turn my camera on the lens wont come out and it says lens error 111 0 0. I tried replacing the batteries but it didnt work.


Try these procedures. ... Kodak Easyshare C813 Digital Camera

Canon A50 I am needing the software/drivers for my SanDisk reader that reads pictures from my camera disk (actually a Canon A50 digital). My original disk is for Win98 only and my Win2000XP was working with this SanDisk somehow before I had to clean my computer out. Now I'm needing the software and when I put my disk in it says that this disk won't work with my OS. Any suggestions? Kelly Hayden


You should be able to find your driver on the link below:\015\012\015\012http://www.sandisk.com/Retail/DriverDownloads.aspx ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Transtwain exe I bought the Star Wars Clone Wars Digital Camera Kit. It brings the Image Master software and driver installation CD and a USB cable. Everything installed right, right until the moment that the Image Master software turned on and it did not recognize the camera connected. The TransTWAIN.exe shows up and says that it has stopped working. I uninstalled the program many times and still the same result. Is there any help I can get with this matter? My son has taken many pictures on hi


... Digital Cameras

The canon 800x digital zoom will not download the video via the firewire cable. worked in the past. tried rebooting, restarting and running RegCure software.


... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2863 seconds