Having problems with your Canon Digital Cameras ?

Card cannot be accessed error - Canon Digital Cameras


Answers :

Hi,
If you have another memory card, please try it in camera.
If same error message appears then let me know model number of your Canon camera to find out the reason of problem.
Thanks.
Repair Help & Product Troubleshooting for Canon Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Card cannot be accessed error - Canon Digital Cameras


Hi,If you have another memory card, please try it in camera.If same error message appears then let me know model number of your Canon camera to find out the reason of problem.Thanks. ... Canon Digital Cameras

I have a brand new Canon PowerShot SD750 camera, I have a sundisk imback 1gb memory card in the camera. I took a bunch of VERY IMPORTANT photos over the past two weeks and suddenly the camera says "Memory Card Error" and I have lost access to my photos and cannot take photos unless I put in another memory card. Are my photos lost for ever, or is there a way to access them?


CardData Recovery can recover data from all camera flash memory cards includingCompact Flash Card (CF), Smart Media Card, Secure Digital Card (SD),Multi-Media Card (MMC), ... Digital Cameras

Have happily used my SLR panasonic digital camera and taken thousands of photos on the SD card, but today it says "memory card error please check the card". Never seen that before and cannot access any of the photos on it. Can't see anything wrong with card, won't read in another panasonic camera either, nor through the card reader attached to my printer. Camera works fine with diferent card. How do I rescue my photos please?


Have you tried this memory card on your computer? \012 If this memory card can be read functionally on your computer, you'd better copy off all your stored photos to another memory card or drive and format this card immediately to check whether ... Digital Cameras

Hello Sir.Madam, I have DSC-H10 digital camera. It is having memory of type "Memory Stick Pro Duo". This card was working fine till the day. To transfer images to my PC, I have accessed this card to SD card reader and then after I inserted this memory card again in camera. Now I am Getting error "Reinsert the memory Stick". I thought that card may have corrupted but I can access it by SD card reader. Also I have formatted it in FAT format and then tried to use in camera but still its not work


Your problem is that you have formatted your MemoryStick from your computer. Your Sony camera uses its own proprietary formatting method and does not understand FAT32. You may also have corrupted your memory card if you didn't click on "safely remove ... Digital Cameras

Card error with card in it says card error cannot access 1g xd card in camera or card reader.It displays card error.The card ha been sent to 3 photo retrieval places with no success.I do not care about the card, I just want my pictures back. I think the pictures were lost when I was reviewing them in the camera and the batteries went flat.I would be grateful for any help in getting the pictures off the card. thanks from vicki


Dear vivky\015\012\015\012there is a solution :\015\012\015\012visist thuis website , download the program and see if it cam recover your files\015\012\015\012 ... Olympus FE-170 Digital Camera

We have a Samsung digital camera L830 USB connection under Windows Vista shows SD card as drive F: however when we open we get error 'Cannot access F:' or similar. Got latest driver from Samsung still no luck can anyone help?


Try accessing the memory card of your camera using the software provided along with the camera. ... Digital Cameras

I just bought a SanDisk Ultra SDHC memory card - 4 GB for my Canon 610 Camera. Previous to this I had a 1 GB card in the camera and it worked fine. Now with the 4 GB card I get a message which says "memory card error" and "Card locked!". When I go to the screen tools screen on the camera, the word format is blanked out and cannot be selected. -- Is this the wrong card for the camera?


Hi,Canon A610 firmware support maximum 2GB memory card and above that limit, memory card error message will appear.Please use up to 2GB memory card in your camera.Hope this info will help you.Thanks. ... Canon PowerShot A610 Digital Camera

I have a Canon Power Shot SD790Is DIGITAL ELPH and the camera keeps saying card error, card locked. I am aware there is a switch on the side of the card, and it is currently unlocked. When I turn the camera on however, it still says there is an error and that it is locked! Please help! Thanks.


HelloOk, here is something you can try:In your case the \015\012problem is not with the card but rather with your\015\012camera's card reader. This is a rather hard problem to fix yourself but\015\012here is what you can do. ... Digital Cameras

I have a Canon Digital Rebel XT / EOS 350D Digital camera. Camera is not reading memory card, it says memory card error. Can this be fixed? or where can Itake it toget it repaired.


CHECK OUT THIS MANAUL FOR HELP!!!\015\012\015\012http://www.usa.canon.com/uploadedimages/FCK/Image/White%20Papers/R ... Canon Rebel XT / EOS 350D Digital Camera

Format error I have a Sony Cybershot DSC-S600 digital camera. When I put it on it tells me Access and after that there comes Format error. And I can not take any photos. I have tried to format the card several times in a card reader and in the camera. Some times it was able to use but at the moment it is totally refusing.


Try to use your card in another camera.\015\012When you say you tried to format it through a card readr, do you mean that the card reader was connected to your PC? ... Sony Cyber-shot DSC-W70 Digital Camera

Camera says memory card error, card locked - Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera


Look at your memory card. SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Canon 10d digital camera Err 02 message - CF card error Have tried multiple CF cards in this camera with same result. Cards all work fine in my other 10d and in card readers / media players. Checked CF card slot - no bent pins. any ideas?


Most likey your problem is the cf card reader when ever the camera was made they could have not heated up the board all the way causing a cold solderjoint after time this joint becomes week and gets disconnected on the back side no visual damage is s ... Canon Rebel XT / EOS 350D Digital Camera

Question for SanDisk SD card 2 GB - Camera is Canon PowerShot SD870 IS Digital Elph Question: When memory card is inserted in my camera the message "memory card error - card locked" shows when the write protect tab is in either the locked or unlocked position. The card is full of my pictures from a trip to Beijing! Please help. Thank you.


There is a small switch in the card that is currently in the locked position. you need to move it over to the other position to unlock it. ... Digital Cameras

My canon Digital IXUS 8015 says card locked when I try to take a picture. I can access photos taken last month on the same card Today when I tried to take a photo the camera beeped and displayed to following message "card locked". I removed to 4GB card and checked the tab was set to unlock. This did not rectify the problem. The card will work in another camera. Any suggestions?.


Your\012 camera uses SD memory cards. On one edge is a slider switch: towards \012the electrical contacts is the unlocked position and away from them is \012locked. Unfortunately, the switch is easy to move a ... Canon PowerShot A530 Digital Camera

When I turn my Canon EOS Rebel T3i, my camera says 'Card cannot be accessed. Reinsert/change the card or format card with camera.' How do I fix this?


... Canon EOS 600D Rebel T3i Digital Camera

"memory card error" on Canon PowerShot SD600 digital camera


We hadnt had any case like this before. i will try to research on your problem as this is the first time too that i have encountered such problem. ... Canon PowerShot SD600 Digital Camera

Canon powershot sd780 is/ixus100 is digital camera, every sd card that is used comes up as card locked on the screen of the camera and camera cannot be used.


Move the slide switch on the side of the card. ... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera

I have a camera Canon A590is, that is not being recognize by the laptop. In the device manager the "Canon Digital Camera" has a yellow marker. After trying to reinstall the driver, a error message "Cannot install this hardware" apperars along with "The Data is invalid" What can I do to fix this problem. Already trie dby reinstalling the camera SW (Zoom browser...) Thank you, Milton


You didn't say what operating system you are using in your PC. If you have Windows XP or later follow these instructions. Since you apparently have the driver and software on a CD, unplug the camera from your PC, remove the camera software from the P ... Canon PowerShot A590 IS Digital Camera

I have a Canon Ixus 100is digital camera that I cannot connect to the PC. When the camera is connected and I choose a canon option, i.e. Zoombrowser EX 6.7.2, a box appears. The box heading is "CameraWindowDC.exe - .NET Framewoek Initialization error" and the message is "Unable to find a version of the runtime to run this application". Can you help? Regards David


Download and install Microsoft .NET Framework 3.5 -->start download.Then connect your camera and see the result. ... Digital Cameras

I used a 4 GB Duracell SD Memory Card in my Canon digital camera. The card now says there's an error and that it is locked. The little switch on the side is "unlocked" but still says locked in the camera. Please help to unlock it. Thanks.


Sounds like the memory card needs to be reformatted. you would need to put it in a laptop or desktop and reformat the memory chip that way. ... Digital Cameras

Camera canon ixus 105 memory card error - Canon PowerShot SD1300 IS IXUS 105 Digital Camera


There are several possible causes for "memory card locked", "memory card error", or "no memory card". The most common is trying to use a 4GB or higher SDHC card with an older camera made before SDHC format came out. Other causes include problems with ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

I have a Digital Rebel 40 D camera less than 1 year old and I removed the memory card and I cannot get it to go back into the slot. The eject button is still depressed after I depressed it to eject the memory card out of it. This is the first time this has happened. I had the original Canon Rebel with over 100,000 pictures taken on it and this never happened. This camera has less than 5,000 shoots and not it is unusable. Any suggestions ? Thank you, Terry


Im no expert, but i would use a flashlight to look inside the memory card holder and see if anythings messed up, and maybe jiggle the eject button a bit, and just maybe the button doesnt come up again until you push in the memory card. give it a litt ... Canon EOS 400D / Rebel XTi Digital Camera

Format error I have a full card of photos and when I went to upload them on the computer I got a "format error" reading on the camera and now cannot access anything on it.  I just looked at these photos last night on the camera and they were fine.


Just get a new card or delete some pictures ... Gateway DC-T50 Digital Camera

My Canon Rebel Digital DS 6041 EOS is getting error code 02 when when I use any new CF card. I have been using the same card for 3 years, and have tried numerous other cards and only the original card works. The original cf card is now lost, and now my camera won't work with any other card. 


Have you tried formatting the new cards in the camera before trying to use them? ... Canon Rebel XT / EOS 350D Digital Camera

I have a new canon power shot a580 and have used a kodak 2gb memory card. I started with an empty card, took approx 30 pictures and then "memory card error" shows up on my little screen. I can't retrieve the existing pictures or take any new ones. I'm new to this digital camera thing.. What should I do?


Did you format the card in the camera first to initialize it? Use a card reader to download any pictures on the card to a folder you create on your desktop. Then, format the card in the camera. ... Canon PowerShot A580 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4580 seconds