Having problems with your Canon Digital Cameras ?

My camera Canon SD1400IS show a message "error e32" a few minutes after I started it and turn off yourself.

Answers :

Repair Help & Product Troubleshooting for Canon Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My camera Canon SD1400IS show a message "error e32" a few minutes after I started it and turn off yourself.

... Canon Digital Cameras

I am new to the video world and just purchased a Canon HF S200 from a guy here locally it is used but looked to be in great condition and working properly. But less than 15 minutes after the purchase and only transporting the camera in my car, when I powered the camera on everthing seemed to work properly except the rotating LCD screen would not come on unless you turn it 180 degrees counter clockwise it comes on and works properly. If you start to turn it back it goes off again. When I turn the

Have you got the user manual? If not, you can download it from www.iusermanual.com.I am not familiar with you videocam but the mannual shows all of the buttons and functio ... Digital Cameras

I have a canon SD1100 I just purchased and after a few minutes the camera will not shut off, the power button won't work and I have to open the battery cover to turn it off. Somehow this completely drains the battery too every time even if it was just charged. Also the camera turns itself on by itself about 10 minutes after you put the battery in it and once again you can't turn it off. I got another battery and the same thing happens. Otherwise it works fine.

If this is a new camera, you should be running back to the store to return it. ... Canon PowerShot SD1100 IS Digital Camera

My canon 20d stopped taking photos for no aparant reason. Kept getting error 99 and when I re insert the battery it starts clicking on it's own whether turned on or not. I sent it to Canon repair who wanted to charge me more than it was worth to repair but that was before they even started to analyse the problem. I decided to buy a brand new 20d. Put in the battery and the CF card and exactly the same thing has happened. I can get the cameras to come on but when I press the buton the flash jumps

If two cameras are doing it, I would suggest the contacts on your lens are dirty.\015\012\015\012Try the following diagnosis steps for solving ERR 99 issues : -To isolate the cause of the issue, do the following: -1. Tur ... Canon Rebel XT / EOS 350D Digital Camera

When i turned on the canon camera, and start using the shoot, the left portion of the camera where the lens is located started to get heat, what's the caused of sudden heat of the canon camera?

It's perfectly normal for digital cameras to get warm. Things like the CCD for example generate heat and due to lack of room for a proper heatsink they can use the actual metal of the camera body to get rid of that heat. If the camera get's really ho ... Canon PowerShot SD1000 Digital Camera

My canon sd1100 IS camera won't turn on. it started off when i would try and take pictures and it would turn off with the lens stuck open, then i could turn it back on and thelens would go back and i could take pictures again. now it won't even turn on at all no matter what i do.

... Canon PowerShot SD1100 IS Digital Camera

I have two issues with my Canon EOS Rebel XS. One issue has been acting up for a while: If I turn the camera on and try to shoot, it tells me shooting is not possible and to turn the camera off and on again or redo the battery insertion. The only thing that works is if I take the battery out and in and turn the camera on again. The second problem started yesterday. My camera would not turn on so I thought the battery was uncharged even though I got no message saying that. But after chargi

Hi,\015\012\015\012You may get the ERR XX before (Shooting is not possible, Turn the power switch to off and on again or reinstall the battery) , where XX is the error number..\015\012\015\012Please leave the error numb ... Digital Cameras

Camera Canon A710 IS started to ask set time date when turned on

When the camera is left without power for an extended period of time, the time and date settings are gone. You need to reset them and when you're finished, click the set/ok button twice. ... Canon PowerShot A710 IS Digital Camera

Canon power shot a620 will not turn on. new batteries, that i tested. slowly started having trouble with it turning on and now it will not turn on at all.

... Canon PowerShot A620 Digital Camera

Canon SD30 I just recieved my brand new CanonSD30 in the mail, it says that i need to charge the battery on the charger for 90 minutes and the light will be orange until it is fully charged and should be taken off the charger immediately when the light turns green. This has not happened, the camera will not turn on and it will only turn on when it is on the charger though it will not take pcitures even with a memory card in. I am getting very frustrated. Thanks

Defective product return it for a replacement ... Canon PowerShot SD30 / IXUS i Zoom Digital Camera

My Canon Powereshot 200SX IS does not start properly. Display comes on but the lens stays closed inside and a led blinks. After a while display turns black, a beep comes on and the white text says: there is an error, try to start again. Starting it again brings exactly the same situation. Loosing the battery does not help either. Camera seems not to react to any control buttons. There has not been any any obvious reason for this, no falling onto the ground or any other impact.

See http://www.fixya.com/support/r13011856-lens_error ... Canon Digital Cameras

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche

Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

My CANON Powershot A470 is giving me the following error message: lens error, restart camera. Ive tried multiple times. I turned it off for a few minutes, nothing happened. I removed the batteries and memory card for a few minutes, nothing happened. I shook it easily...nothing happened. I vacuumed the lens and tapped the lens...still nothing.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot A470 Digital Camera

My Canon S3 IS compact has a viewfinder problem. Upon switching on it always shows the "settings" icons around the viewfinder but the image is not there. I have to turn the camera on and off about 6 to 10 times. The viewfinder image starts to appear dim and blurred. Finally it starts to work OK. It is 2years old and taken about 1000 images.

It sounds like the camera either has a connection for the image that isn't the greatest or the control board needs some work. You could try removing the outer panel and taking a blow dryer to the internal parts but don't let it get too warm and see i ... Digital Cameras

When I turn on my Canon PowerShot A75 digital camera, it has streaky pink lines. When that finally clears up,(which may take several minutes) it usually has a pink tint. If I try to take a picture, the picture is streaky or pink. Is this the problem that Canon will fix free of charge? The problem has been getting progressively worse since last year. What do you suggest?

This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot A75 Digital Camera

I have a Canon PowerShot A400 digital camera. when I turn the camera on, it acts like it is going to turn on, then it starts beeping and the screen goes black. It has the message E18 in the lower left corner of the screen. I changed the batteries, but it is still doing it.

Please see this post:\015\012\015\012http://www.fixya.com/support/t102982-e_18_problem\015\012\015\012Good Luck!\015\012\015\012Brian ... Canon Digital Cameras

Camera problems I can see the different setting symbols on the screen and when I turn it off and on I can see the canon pic it shows upon coming on. However, when I take a pictures I can no longer see the picture I am taken on the screen and although it appears to have taken the picture the picture turned out black. This starting taking place after my husband changed my settings I cannot figure out what to do to change it back. Please help.

This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot A85 Digital Camera

My fujifilm finepix f480 is brand new and i've only used it about 4 times. Without any incident to start a problem, the charger stopped working and the camera wont turn on at all with the battery in it. The charger light will go on for about 2 minutes and then turn off, and the camera light wont go on at all with the battery in it...is this the camera or the battery or the charger?

Looks to me as charger issue. Digi cam dont work if battery is very low... forget about flash. Also check the input voltage for charger as it should be compatible with power supply at your home. ... Fuji Digital Cameras

Canon ZR200 memory card say ''card error'' when inserted. Card is not locked. I have formatted it. Have used 3 different sizes of cards. Sometimes it will say ''card error'' then start working a couple of days later as if nothing was wrong. Last card used worked for 13 pics then started ''card error'' next time I turned it on. Currently it just says ''card error'' all the time.

Sounds like the contacts for the cards are dirty. Turn off the camera and remove the batteries before doing the following.\015\012\015\012Try taking a piece of card stock (or a manilla folder) and cut it to the size (width only) of your ... Digital Cameras

Camera problem My daughter just received a new HP635 camera for her birthday. At first the camera worked fine, but after a few minutes of use, the camera started flashing the welcome screen repeatedly and the zoom lense would move in and out over and over until we opened the battery storage compartment of the camera. Opening the battery compartment is the only way to turn the camera off. Everything on the camera becomes inoperable when this process starts which now is every time the camera is tu


My canon digital IXUS 60 is not working. It was going fine and then I turned it around to take a self portrait and clicked the button when i lokked back at the screen it was blank and i haven't been able to turn it on again using the on/off button, how do i start it again. it is like it has shut itself down and frozen.. help, its my dads and i dont want it to be broken....

Sounds like you accidentally pressed the display button which turns your LCD display on and off (to save batteries). Turn on your camera, and press the DISP button once in the lower left corner. ... Canon Digital Cameras

I received a canon powershot as a gift last year and am just now really starting to use it. The pictures seem fine, but the it seems like I am frequently requested to put in the date and time (i.e. about every 2nd or 3rd time I turn the camera on). Is there somethign I can do to get the camera to retain the date and time? It is sort of annoying that I can't turn it on and take a picture quickly since it won't let me take one until I have entered the date and time. Also, I don't think it is stamp

There is a button battery in your camera (CR1220) that remembers the date and other settings when you remove the main batteries. It probably needs to be replaced. It's in a slide-out holder next to the AA batteries (see page 184 in the manual). ... Canon PowerShot A590 IS Digital Camera

Canon A400 Hi, I have the above camera (canon power shot A400) and have just solved the E18 error by tapping the plastic A/V out cover - THANK YOU ! However, now, although the camera turns on, lense extends and I get full working order - after a few minutes I get the message 'Change batteriers'. and the camera dies. I have now put in several new batteries (including the little(cr1220) but the same message keeps coming up and the screen and the whole thing dies after a few seconds. Is this a furt

Having using standard LR6 batteries in a Canon before you will only get 3 or 4 pics max before it drains the batteries. You really need high power AA's like 2300mAH+ rechargeables for any good performance or Lithium AA's ... Canon PowerShot A400 Digital Camera

I have a Canon Powershot Digital camera just over 1 year and we turned it on the screen is all black now(started out 1/2 black-it flashes but no picture is taken- all settings are as they have been since we bought this camera from BestBuy. This is the 2nd Canon Powershot we bought in the past 3 1/2 years & it will be the last one. Can you tell me what I can try to get this fixed? Thank you. Karen from NC

Test ... Canon PowerShot A85 Digital Camera

Handycam suddenly won't turn off. When I remove the battery it turns off ,of course, but when I reinstall the battery it starts up even though it is on off. If I try to record it won't and a C:13:01 shows up on the upper right hand of the screen and is flashing. Window shows 103 minutes of battery power left. It wants to stay in photo mode and won't stay in video mode. It will take photos but it won't video. Basically the on/off/mode ring is not working. Can you help? Thanks, Mike

Could you post the model of your sony. Seems to be a Memory Stick Error. Take the memory stick out of the camcorder, and clean the contacts.Take any lead pencil. Take the eraser and rub it on the gold contacts\015\012on the me ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2845 seconds