Having problems with your Canon Digital Cameras ?

Canon S2IS, Lens does not retract, Errror E18


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair \012center for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

Hope \012the advise is useful.

Regards
Andrea
Repair Help & Product Troubleshooting for Canon Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon S2IS, Lens does not retract, Errror E18


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\012\01 ... Canon Digital Cameras

Canon PowerShot S45 lens is retracted out and lens cover won't open or shut. camera cannot operate. Powers up, E18 shows on blank viewfinder, beeps 3 times and goes back to blank viewfinder. Shift lens cover back, sounds like it's opening/closing, but nothing happens other than the above.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot S45 Digital Camera

Hi, I have Canon PowerShot A95, Digital Compact Camera, when i switch on the camera it will beep a few times and the LCD will display a little E18 in the lower-left corner. The lens gets stuck in the extended position, and refuses to move either to focus the lens or to retract when powered off. would be great if you could provide some advice for rectifying the problem. thanks


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Canon PowerShot A95 Digital Camera

Hi, we dropped the Canon IXY in the sand and the lens now won't retract. We have tried to clean out the sand but the message persists. Is E18 a lens problem or something else?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Canon IXY 1000 Digital Camera

Canon digital IXUS 400. The lens will not retract. When turn on the monitor lights up after bleep , it then bleeps again, E18 appears in the left hand corner and then it powers off. The lens remains extended. Can you advise how to correct the error? I have tried charging the battery and cleaning the contacts.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot S400 / IXUS 400 Digital Camera

Canon Powershot SD450 E18 problem: The camera lense would not open and reported error code E18 on power-up and then would shut down. I followed a procedure on the web for this issue and got the camera lens to open and it was working (able to take pictures for about a minute). When I powered down, the lense did not completely retract. I tried re-powering on but nothing happened. The camera is not getting any power. I figured the battery died so I re-charged it. I put the fully charged batt


... Canon Digital Cameras

E18 lens will not retract - Canon PowerShot S2 IS Digital Camera


Hi your answer of your problem e18 lens will not retract.i have send this information to solve your problem.Turned the camera on with weak batteries. Lens extended and won't retract.\015\012 ... Canon PowerShot S2 IS Digital Camera

Canon iXUS 750 approx 3 years old. Getting E18 message. Lens will not retract, unable to take photos. Camera not dropped.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot SD550 / IXUS 750 Digital Camera

My canon ixus 750 shows a code E18 on the screen and the lens will not retract. But the camera will not allow me to take any photos it just switches off. Please help me.


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Digital Cameras

E18 error message lens will not retract - Canon PowerShot SD500 / IXUS 700 Digital Camera


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Powers off my canon powershot sd600 digital camera keeps powering off after about 30 seconds. I have gotten a new battery and that didn't help. On the left hand side before it shuts down it has the letter and numbers E18 on the bottom. The zoom lens is also sticking out and will not retract. There are no error messages on the camera at all. If anyone has a solution please let me know. Thanks!


E18 is a lens error message, the lens is stuck or bent, and wouldn't come out, that's why camera shuts off after it tries to do so at the start, not much you can do, but replace the whole lens assembly ... Canon PowerShot SD600 Digital Camera

Hi! We have 10 year's old Canon PowerShotS50. Today I got E18, lens would not open or retract. I've tried all the methods on http://www.e18error.com/repair.html , no help. Than I followed one by one the methods posted on this page - and suddenly 'smacking' the camera while turning on (Golem's comment) worked for me! Many thanks to everybody for your help, saves money and time. J.


\012Hello there,\012\012The E18 error is related to the LENS not able to retract fully. If it is still under warranty, I would advise you bring it to the nearest service center. This is to avoid further damages. Otherwise, you can try a f ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Canon PowerShot shows an E18 on the screen. Lens won't retract.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A85 Digital Camera

I also have A canon poweshot S21S camera . The lens will not retract cannot take pictures and code E18 . Is the camera hard to take apart ?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Canon PowerShot S2 IS Digital Camera

Canon powershot s2 is lens won't retract error e18


Try tapping not so gently. other than that it will most likely need to be taken apart and put back together the right way. And any broken parts replaced. ... Canon PowerShot S2 IS Digital Camera

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

I had the E18 error--lens wouldn't retract and


Focus problems are quite common after a lens error, it sounds like you still have an issue with that lens unit. If you need help, there's a great site taht just specializes in the powershot problems, nothing else at all. Try going to ... Canon PowerShot SD890 IS Digital Camera

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche


Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

Canon S80 lens won't retract


I have the same camera and had this problems today. My son solved the problem for me. He put his thumbs on each side of the lens and pressed inwards causing the lens to pop out. Since then, I have been able to close and open the lens repeatedly witho ... Canon PowerShot S80 Digital Camera

Lens is open and won't retreat back inside. I turn the power on and makes a funny clicking noise like its trying to retract the lens back in. After three seconds of this it says "lens error, restart camera". Its a canon powershot SD790 IS digital elph with image stabilizer. Canon PC1261...don't know if that helps.


I've had similar problems with various versions of this camera. Here's the fix, if all else fails. These are step-by-step instructions to take apart and fix the camera's lens error. http://johnsmouth.wordpress.com/2010/12/01/lens-error/ ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

Hello I have a Canon digital elph sd600 and the lens won't retract all the way and it gives me a lens error message to restart the camera but the lens is stuck halfway - it won't extend fully and it won't completely retract. Any suggestions as to what I need to do to fix this? Thanks so much I appreciate it.


See http://www.fixya.com/support/r13011856-lens_error ... Canon PowerShot SD600 Digital Camera

The lens will not retract. A message says "lens error, restart camera," but the camera will not restart. The camera is a Canon PowerShot S3 IS. I can hear a "whirring" or motor noise when I try to start it, but the lens will not retract and it will not take photos or allow you to review photos. Batteries are just fine. I imagine it's the gears, but I wish I could have it repaired for not a lot of money.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot S2 IS Digital Camera

Hi there, I have a Canon IXUS 90 IS - the lens is extended out and won't retract when pressing the 'on' button. The camera only makes a 'turning sound ' from the motor ( I asume the motor), but the actual display in the back reads' Lens error, restart camera' The nearest camera specialist for Canon are a good 600 and 1400 km's away respectively ( I live in Durban, South Africa)so would like to rather try fix this myself before paying, most likely a similar amount to buy a new camera. Any suggest


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

Was shooting with Canon PowerShot S3 IS and the lens won't retract,screen says lens error,restart camera. I have restarted camera, changed batteries etc... still nothing. You can hear a clicking sound like something should be happening, but it won't retract.


According to what you were doing there is a possiblity that its jus sand or someting that got caught in the lens. please take it to the neariest repair shop to get it cleaned/ checked. ... Canon PowerShot S3 IS Digital Camera

I have a canon poershot A85 with error E18. It was working fine until I switched off for a few minutes. When it was switched back on, the lens stopped halfway and the camera "locked up". On putting new batteries in, I have got the lens fully out, but it is now stuck there and I'm still getting the E18. Any suggestions?


I would suggest you go and buy a new camera as they are so hard to get repaired and if you dont know how to work on them it makes it even harder.you will get a lot of odd advice on here as you are alreay figuring out but your best solution is to go g ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2505 seconds