Having problems with your Canon Digital Cameras ?
Lens not openning or closing - stuck in the middle and it says "lens error, will shut down automatically, restart camera"
This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My lens on my Canon IXUS 105 is stuck open and when I push the on/off button I get an error message which says: Lens Error Will shut down automatically Restart camera I can't view pictures, I can't press any of the buttons... I'm not sure where the restart button is. It's a very new camera, I only got it 2 weeks ago. Please help!
Hi,This is a common problem on this set. The lens error is common for cameras with telescoping lenses.\015\012\015\012You can help the motor by connecting the AV cable --- this keeps the LCD off and not d ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera
When I turn on the camera, it says "lens error, please restart". The lens doesn't open when you turn on the camera- it is like it is stuck shut. you can manually force it open, but it won't go automatically, and so it keeps on giving the error messages.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon PowerShot SD600 Digital Camera
I have only had my Canon PowerShot SD1400 IS Digital camera since December and all of a sudden whenever I try to turn it on, the lens does not open or move out and I receive an error message saying "Lens Error, Will shut down automatically, Restart camera." I have never dropped this camera and am concerned that it is not fixable. Please help!
It always comes because there is something loose inside the lens, such as a screw.\015\012These articles maybe helpful for you: ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera
I PoweShot SD1300 Is that is less than a year old. The lense is stuck open and I get an error message saying Lens Error Will Shut Down Automatically - Restart Camera. I've tried to restart and even removed the battery but the lense remains stuck. Please advise. Thank you - Paul Murakami
HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera
Lens not openning or closing - stuck in the middle and it says "lens error, will shut down automatically, restart camera"
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon Digital Cameras
My lens wont open adn when i try to turn it on it says lens error will shut down automatically restart camera and i have tryed taking the battery out and everything.
Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera
I bought my camera Christmas Eve, and a new memory card Christmas Day. Yesterday, I tried turning the camera on and the lens opened and shut automatically and said Lens Error with a Large Red Exclamation point. I've come to the conclusion that it was because I hadn't formatted the new memory card with the camera and I'd already taken a few pictures with it. But now, when I turn the camera on, it no longer says that and only has a blurry image and does not take photos. I do not know how to fix th
... Nikon Coolpix S4000 Digital Camera
Lens error Hi My Powershot SD4000IS developed a problem after taking it out 4 wheeling.(in a bag, semi protected) a few days later, the lens front cover would not open all the way and I got a black shadow on top and bottom of the picture. Then I took several pictures that are normal and finally the lens will not extend any more and I get a note on the screen that reads : Lens error Will shut down automatically Restart Camera. What could be the problem, could it be dust??
It could be dust, or it could be other things. \012Try the procedure in this tip. ... Canon SD4000 IS IXUS 300 HS Digital Camera
My SD850is was dropped,there is a slight split on the bottom (looks like 2 screws are missing). When you turn the camera on, it says "lens error - restart camera" and then shuts off. It does show the opening picture on the LCD but then turns dark and shuts off. I've had the camera for about 2 yrs. Anything I can fix or is it worth the price of repair which would cost approx. how much?
From searching the internet, it sounds like the lens needs to be replaced and the cost of the repair would be about as much as buying a new camera. thanks for responding. now i have to go thru "what to buy" again....... ... Canon Digital Cameras
I was taking photos and then I turned my camera off and back on again and it came up saying 'Lens error, will automatically shut down, please restart camera' and I restarted it 10 or so times
... Canon PowerShot S100 Digital Camera
Unit Model: Canon Powershot A2200 Problem: Battery drains without retracting the lens. at power on: LCD says error lens, will shut down automatically, resart camera. how to restart this camera? ive already removed the battery & turned on off several times...
I suggest check in this link, some tips about fixing-lens-error-on-digital-camera.Hope helps. ... Canon A2200 Digital Camera
I turn on the camera and the lens does not open. The screen says lens error restart camera. Then it shuts off.
Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot SD790 IS Digital Camera
How do you fix 'lens error restart camera' I put it in my bookbag. I guess i threw my bookbag around and now i have this "lens error, restart camera." The lens froze halfway and it's staying that way. Please help. when i turn on my camera it says lens error, starts beeping, and then shuts off
WE WENT TO THA BEACH AND TOOK SOME PIC AND LATER THAT DAY WHEN WE WENT TO TAKE MORE PIC IT SAID LENS ERROR RESTART CAMERA BUT WE DON'T KNOW HOW TO RESTART THE CAM ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera
Canon Power Shot A2000 IS lens is stuck in out position. I had to replace batteries. I replaced them and when I turn on, it says "Lens Error, Restart Camera" and it shuts offs automatically.
The lens has probably got something in the retraction mechanism that is stopping it retracting. This can be something as simple as sand or grit or as a result of a drop or knock. In most cases the camera will need to be stripped apart to remove the l ... Canon Powershot A2000 IS Digital Camera
Why does my powershot SD 1400 IS camera say "lens error, will shut down automatically restart camera" when i try to turn it on?
Try these procedures. ... Canon PowerShot A560 Digital Camera
I accidentally dropped my Canon SD1400 IS (camera) the other day and now whenever I turn it on, it says "Lens Error. Will shut off automatically. Restart camera". Can you help me fix it without having to break the bank?
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera
I have a canon ixus 900Ti. I turned it on yesterday and the lens came out as normal. when i went to take a pic the camera shut off but the lense never retracted. when i turned the camera back on the splash screen came on, followed by a series of beeps and then and error message saying "lens error, restart camera". restarting has not solved the problem. its like the lens is stuck out. hope you can help Regards Liam
Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Digital Cameras
Error showing while Restart of the camera: error message shown: Lens error Will shut down automatically Restart camera
See http://www.fixya.com/support/r13011856-lens_error ... Digital Cameras
When i try to turn my camera on it says "lens error, restart camera" but when i try to restart the camera it just repeats the error message. Ive plugged the camera into the computer, I've tried taking out the battery and memory card nothing changes. the lens will not extend or open"
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon PowerShot SD1100 IS Digital Camera
When I open my cam for capture it says LENS ERROR RESTART CAMERA then I restart it never works still the LENS ERROR RESTART CAMERA. what will i do?thanks
The possibility that your camera has encountered a fault in the auto focus mechanism is doubtful. Try to remove the battery and test the voltage. clean the terminals, look for dirt in the lens area - possible sand locked in- use a good air jet to cle ... Canon Digital Cameras
Lens error, restart camera- the lens is open like youre about to take a picture but its stuck like that even when its off. everytime i try turning it on it just says lens error, restart camera
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera
When I turn it on, it says the Error thing, and the camera lens won't push open. But sometimes when It opens, it won't close. And when It's trying to open, its like shaking and forcing its
Try the procedures in this tip. ... Digital Cameras
Error in start of the camera:Error message-- Lens Error Will shut down automatically Restart camera
See Lens Error ... Canon PowerShot Digital Cameras
Lens error I have an ixus 230 HS - I turned it on the other day & I must have bumped the lens or something, as it shut down. The lens stayed out though & wont close, when i turn it on it starts beeping at me & "Lens error, Will shut down automatically. Restart camera" comes up on the screen, it then shuts down again. I have removed the battery & the memory card, but to no avail.
... Canon Digital Cameras
Lens Error! I dropped my camera on the floor, and now the lens wont open fully or close. The LCD says "lens error,restart camera." But even when I turn the camera off, it still happens. Its a Canon Power Shot A550. I need to find out how to fix my camera without breaking it some more.
Same problem. The lens is stuck in the zoom position. When the camera is turned on, the lens moves a just afraction like it want to fully open or close, then the camera beeps and prompts with the "Lens Error" Restart Camera. Solutions? ... Canon PowerShot A550 Digital Camera