Having problems with your Canon Digital Cameras ?
Everything works on my camera, but the screen is black all the time...Like the lcd has gone out or something...
Most likely you have a problem with the LCD display. The displays are very susceptible to breaking if the camera has been dropped. The backlight could be defective too. I have replaced many of these displays in cameras. try to get an estimate to have the display replaced. You'll probably find that the estimate will be fairly high. The displays are not too hard to replace. You might try contacting the parts department at Canon and see if you can purchase the LCD display and repair the unit yourself. I wrote and posted an article on this site on how to replace the displays in Kodak cameras. The prodedure will be fairly similar on most any type of digital camera.
Repair Help & Product Troubleshooting for Canon Digital Cameras
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have (2) DGS-200 Moultrie cameras that the LCD display has gone out. Replaced (1) with the LCD display from a Moultrie 100. Worked great but I still have two cameras that can't be programed without seeing on LCD. Is there anywhere to purchase these LCD screens or purchase non-working Moultrie cameras?
WWW.MOULTRIEFEEDERS.COM WILL SEND REPLACEMENTS AND INSTRUCTIONS FOR FREE.... ... Moultrie MFH-DGS-100V2 Digital Camera
Everything works on my camera, but the screen is black all the time...Like the lcd has gone out or something...
Most likely you have a problem with the LCD display. The displays are very susceptible to breaking if the camera has been dropped. The backlight could be defective too. I have replaced many of these displays in cameras. try to get an estimate to ... Canon Digital Cameras
The lcd screen on my camera cracked, and it had a dark spot on it. I bought a new screen to replace it. I replaced it, but the only thing that happens its the the camera lens opens and everything stops. The lcd screen doesn't come on, and the camera wont power off. is there something that i am doing wrong, or that I need to do to get this to work? thanks, Lavoia
Maybe you installed the LCD screen wrongly and it doesn't respond if not properly installed. ... Digital Cameras
Sony DSC-F717 I have a Sony DSC-F717 camera which has worked well(except for the incredibly slow record time in TIFF) until now. The camera stays dark as if the shutter is stuck. I can turn the camera on, see the readings(battery, memory space etc.), view images previously recorded on the memory stick ? but not see anything through the lens, either on LCD or through the Finder. Is something locked up or stuck and how do I unlock it?
CCD is DEAD ... Sony Cyber-shot DSC-W55 Digital Camera
My LCD monitor seems to have gone blank, camera works fine other wise.Would this be an expensive repair? camera is cannon power shot S1 IS.
If its under warranty period then free of cost. Otherwise if LCD damaged then maximum charge 70 USD or 20 - 25 USD for LCD connection defected from inside.\015\012Thanks. ... Canon PowerShot S1 IS Digital Camera
Broken lcd Camera works fine, I have to use the small view finder because The lcd is broken. Is this something I can replace myself?
Just click below for free estimate;http://www.advancecamera.com/repair/Hope this may help you;Regards,VOTIT ... Casio EXILIM ZOOM EX-Z60 Digital Camera
When I turn my camera on, the LCD doesn't light up anymore, and I can't view through the lens either. It worked fine until 2 days ago. I accidentally hit something on the camera while taking pictures, and I haven't been able to set it back.rn How can I fix this? Christmas is 2 days away, and I'm beginning to worry.
This might be your problem if the camera is functioning properly then you may have pushed the Disp/Back button in the lower left corner on the five way controller dial. Push the button and the display on the view screen will change. ... Fuji FinePix S1000FD Digital Camera
Audio is not heard during playback or when new recording. Volume is turned all the way up. It was working fine, then after I hooked it up to view on the TV it quit working on the camera. I have gone through the menu trying to see if I turned something off, but have not resolved the problem.
Hi,Please intimate model and make of your camcorder to see its schematics for solution.Thanks. ... Digital Cameras
Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig
That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera
My lcd screen on my finepix s1000 fd seems to have stopped working. When I turn the camera on, it diplays fuji film ,,,, briefley, then goes black. the camera itself seems fine. Have I inadvertantly done something to cause this, and how can I fix this . Thank you.
Try pressing the EVF/LCD button. It could be that you've mistakenly changed to the view to viewfinder only??? ... Fuji FinePix S1000FD Digital Camera
I replaced the lcd display screen with a new one ordered on an internet site. When the camera is powered on, all I Get is a white screen. All other functions seem to work normally. Do you think I got a bad replacement screen, or is there something else wrong with the camera ??
You might have mde mistake,while attachment.of lcd unt to the mother board ... Olympus FE-360 Digital Camera
I have a canon rebel xti with an 18 to 55 lens .. I recently bought an external flash to sit in the hot shoe .. now when I removed the flash from the hot shoe .. the cameras own flash will not pop up and work... I can manually pop the flash but it still will not work.. I thought that when I bought the flash at the camera store the sales person turned off something on the camera for the new flash to work.. is there something I need to change in the menus to get the cameras own flash to work.....
I had the same problem. \015\012Look closely at the hotshoe. Inside it, way over to the side, under one of the tabs on the side, is a tiny metal strip. When you attach an external flash, the strip is pushed down and holds down a tiny button ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens
Nikon d40 hi i got my self a nikon d40 all was well for the first 5 days was working well very happy. but then i went to get the d40 out to take some early morning beach shots turned it on and got a white lcd and the camera would not work so took the battery out to check it put it back in cam turned on and worked but still the white lcd and if you turn it off then back on camera wont work unless you push the battery first and still have a white lcd. have taken it to my registered nikon dealer t
Sounds like you got a bad one, i would ask for a new one. ... Nikon D40x Digital Camera
I have Olympus t 100 and try update firmware version 1.2, something go wrong. Now my camera not working. Only litle orange light right side on lcd-screen is active (all the time when power is turn on)...:( What i can do???
... Olympus T100 Digital Camera
My Canon powershot SX10is LCD screen does not work when it is open (extended from the camera). Is there a setting or something I need to change
Press the Disp button near the bottom right of the LCD display housing.\015\012\015\012You may need to press it twice to switch the display back to the LCD from the Viewfinder. ... Canon PowerShot SX10 IS Digital Camera
My GE A1050 camera LCD screen has gone black and any pictures taken are blank. It was working fine 2 hours ago; those pictures are visible in preview mode. What could have happened? Thank you.
... General Electric A1050 Digital Camera
Hi, I have a Canon Power Shot S2 IS 5.0 megapixels that was working fine until one day I changed the memory card from 512MB to a 1GB. Now every time I turn the camera on and try to take a picture, a beeping sound and a legend on the LCD screen that reads: Memory card error. It's like something locked the shutter mechanism. I tried other memory cards with the same results. Thanks, Roger.
Its possible that there may be an error on the camera try to reset the camera by \015\012\015\0121. Turn the mode lever to the camera or play button\015\0122. Press and hold the MENU button for more than 5 seconds.\015\0123, T ... Canon Digital Cameras
I have Olympus t 100 and try update firmware version 1.2, something go wrong. Now my camera not working. Only litle orange light right side on lcd-screen is active (all the time when power is turn on)...:( What i can do??? How i can install new firmware?
Hi,\015\012\015\012It seems that the latest Camera Firmware upgrade available for the T100 is Ver1.2. The previous version was Ver 1.1. \015\012\015\012You can download the newest firmware to your camera through the Internet. ... Olympus T100 Digital Camera
Horizontal lines in my photos. Nothing on lense: the photo looks fine on the LCD until I look at the history. When I put them on the computer to view-the lines are still there. I have a bran new Kodak Z series easy share camera (2 weeks) has not been dropped or water damaged: all of a sudden the lines appeared (with in one photo- and maybe one minute between the two) I must have set something wrong but the web site had nothing> I took the battery out (didn't work either). A long, but unusefull
The symptoms you are describing are indicative of failure of the camera's CCD image sensor. In other words, the camera is defective. This is something you cannot fix yourself. As the camera is only 2 weeks old, you really don't need to be contacti ... Digital Cameras
While it appears camera is taking picture, flash works, etc. no picture shows. Think my LCD screen is gone also.
This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot SD110 / IXUS IIs Digital Camera
Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!
You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera
It seems to me that Nikon Point & Shoot cameras, or at least the last 2 that I have bought, have a usable life span of approx 4 or so years before the LCD's decide not to work in turn, makes the camera non usable. I have a 5700, 3.5 years old before it stopped working & a S4, which the LCD also quit working and it is 4 years old, I think my next point & shoot will be a Canon to go along with it's big brother that I bought this year, 50D Does anyone have a solution to this Nikon problem? Stan Wil
No solution here. If you want a quality Nikon, you need to spend thousands for their professional DSLRs. Take care of your Canon and you should be very happy with it. ... Nikon Coolpix S4 Digital Camera
The LCD on my A590is camera doesn't work. When I
If the lcd is flexible then mostly the problem is with lcd connector.if you have a v cable then connect it to tv and see if picture is coming, if it comes then connector is faulty for sure ... Canon PowerShot A590 IS Digital Camera
Hi Suddenly my g11 is blind lcd is working but camera doesn't see anything lcd is black in all modes like electronic courtain does not open exposing sensor all other functions are seems to be working camera is actuallytaking black photos now those taken previously can be still displayed from memory card
There is two ways to view your "taking picture" with the LCD and with the viewfinder, you can shut the LCD off to save battery power and use the viewfinder and that is what I think has happened. a touch of the DISP button and it will switch from the ... Canon PowerShot G11 Digital Camera
I have a Canon Powershot S30 with a bad LCD. Otherwise working. I also have one with a working LCD, but the lens will not extend. I'd like to make one out of two. Is there a manual with exploded views available so I can do it myself or is that unrealistic. I have several cameras, so I suspect that a professional repair would cost more than the camera is worth. Like most electronic relics, it seems to be cheaper to replace than repair.
Try these fixes for the one with the bad lens:\012Fixing a Lens Error on a Digital Camera\012\012This has to b ... Digital Cameras