Having problems with your Canon Digital Cameras ?

L.How important is it that I update firmware 1.0.4 to 1.08 on my 40D slr? 2. Is there an adapter that will work with FD lenses and the 40D?

Answers :

The firmware update (Version 1.0.8) incorporates the following improvements and fixes.
1.Fixes a phenomenon in which Image Stabilization operation emits a sound when certain buttons are pressed, with the EF-S 55-250mm f/4-5.6 IS lens attached to the camera.
2.Fixes a phenomenon in which the Image Stabilization operation emits a sound from the lens when IS lenses are attached to the camera.
3.Fixes a phenomenon in which a part of the image looks unnatural when reviewed on the LCD.
4.Corrects errors in the Spanish and Norwegian menu screens.
\015\012So if your camera is working properly for your purposes, and you don't use any IS lenses, you don't really need to update the firmware.
\015\012In answer to your second question, I don't think so. All EOS cameras communicate with the lenses completely electronically, and so work with any EF or EF-S lens. You may be able to find an adapter which would physically match an FD lens with an EOS camera, but all settings would have to be done manually on both the camera and the lens, and it would definitely be trial and error. The metering function in the camera depends on receiving a lot of information from the lens to get the correct exposure.
Repair Help & Product Troubleshooting for Canon Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

L.How important is it that I update firmware 1.0.4 to 1.08 on my 40D slr? 2. Is there an adapter that will work with FD lenses and the 40D?

The firmware update (Version 1.0.8) incorporates the following improvements and fixes.1.Fixes a phenomenon in which Image Stabilization operation emits a sound when certain buttons are pressed, with the EF-S 55-250mm f/4-5.6 IS lens attached to ... Canon Digital Cameras

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do

The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

I have a canon 40d SLR on Tuesday this week I updated the Firmware to 1.0.8 from 1.0.5 with no problems.but now find that when I review a picture on the LCD no problem,When I zoom in on the LCD screen no Problem but when I zoom out again this switches the LCD off. this was not a problem until I updated the Firmware can u Help Derek Pedder,[email protected]

Put all camera funtions back to factory defaults ... Canon Digital Cameras

Canon EOS 350D LCD Does't show Pictures, and can not take pictures. It does not work with CF card or without. all other camera functions work and the lcdd works for all menu functions. Things I tried I tried removing battery. Updating the firmware.

Sounds like a faulty CF card, or it's not been placed in the camera correctly. ... Canon Rebel XT / EOS 350D Digital Camera

I bought a spare battery DMW - BCG10E for my Panasonic DMC-ZS3 Digital Camera but it doesn't work since the firmware is meant for Version 1.1. Should I try to downgrade my firmware to V. 1.1 in order to be able to use that battery? Or, is it going to affect the quality of playback HD videos? In any case, I tried to download the firmware Update 1.1 Driver for Mac OSX to be able to use that battery but couldn't find any internet server capable of doing it. Thanks!

Hi.Most batteries of this kind work with firmware 1.1 and following \015\012(1.2,1.3 and 1.4). They never work with the 1.0 version, which was \015\012built in in earlier DMC-ZS3. Check your firmware version. If you have 1.0 ... Digital Cameras

Hi.I have a Canon Powershot S5 IS.When I turn on the camera, the little display seems not to focus and when I open the big display, there appears a black screen.I restored the factory settings and the big display is working fine, but the little display has the same problems.I think that a firmware update would be perfect, but I didn't find any update on Canon website.What can I do?

... Canon PowerShot S5 IS Digital Camera

Have a samsung tl500 camera that is now a brick....updating the firmware it stopped in the middle. tech support had me do a restart of installing the firmware and does not work

... Samsung TL500 EX1 Digital Camera

I have Olympus t 100 and try update firmware version 1.2, something go wrong. Now my camera not working. Only litle orange light right side on lcd-screen is active (all the time when power is turn on)...:( What i can do??? How i can install new firmware?

Hi,\015\012\015\012It seems that the latest Camera Firmware upgrade available for the T100 is Ver1.2. The previous version was Ver 1.1. \015\012\015\012You can download the newest firmware to your camera through the Internet. ... Olympus T100 Digital Camera

Sloooooowww speed I LOVED my 20D the first two years I had it. Then last spring it started slowing down - I was no longer able to fire off shots like before in multi-shot mode. Then one day it wouldn't stop clicking off shots. I turned it off, took the battery out and let it sit for a bit. Then it stopped working altogether and I got an error 99. It went into the shop and Ritz Camera said they fixed it - but they didn't. It worked one hour and did the same thing. I loaded a firmware update on it

Try cleaning your camera. ... Canon EOS 20Da Digital Camera

Have updated to firmware 1.04 on K20D but beep wil now not work. Tried to change using Remote Assistant 3. All other buttons work with this but beep.

Hi and welcome to FixYa!\015\012\015\012May I ask how's the camera doing now? Have you tried removing the battery? If not then I strongly suggest that you remove the battery and let it sit for atleast 5mins. then reinstall it again. ... Pentax K20D Digital Camera

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju

Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Update pen after update firmware the camera do not work

The wrong firmware was installed, The firmware installation did not finish etc. There is almost nothing that you can do except send it in. ... Olympus PEN EPM1 Body Only Digital Camera

Exilim Z50 w3on't accept 4GB SDHC Other i.e. Z60 have firmware update for this Ver.1.1 will it work?

I have a z55 and it doesnt accept anthing higher that 2gb, these older cameras dont, also if they have a firmware update for your exact camera, it doesnt hurt to update it. but some people go by, if it aint broken dont fix it. ... Casio Exilim EX-Z55 Digital Camera

I recently bought a sunpak digiflash 2800 external flash for my canon T2i. I doesn't work. I see online that many other people have had the same situation. Is there a firmware update i could download to fix it?

I believe these aren't really suitable to work with that camera, I know it says it will, but one only has to look at the amount of people that have one and have problems to see that it's simply NOT suitable and will NOT work 100%.\015\012\015\0 ... Digital Cameras

SD card I just bought a kingston 8GB card for my camera but it will not recognize the card. Says "Memory card error Please check the card". I have formatted the card on my laptop and it works fine on the laptop. I even copied pictures on it and there was no problem. Is there a firmware update for the camera that I need? Thanks

I have the same camera, save the colour (black). As soon as I read your post, an alarm went off.\015\012I decided to re-check my User Guide (PDF Eng version, page16), for the Lumix DMC-FZ30:\015\012\015\012\015\012\015\012•On this unit, yo ... Panasonic Lumix DMC-FZ30 Digital Camera

My canon eos xti is not downloading properly to my mac....sometimes i get photos to show up but then I can't import. I've tried more than one cable and more than one mac...nothing works...Do i need an updated driver?

Consider NOT using a driver.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected ... Canon Rebel XT / EOS 350D Digital Camera

My 50d shows error 30 every 10 to 15 shooting. I updated the Firmware 1.0.7 Not working... How can I fixed it???

... Digital Cameras

My Jazz DV142 will not read my SD Card. It worked fine at Christmas time, but now it will only function with the card removed. I have tried different cards, and even purchased a new one. I know the unit will not support anything larger than a 4GB card. Is there a firmware update that will correct this problem?

Have you looked closely at this card to see whether it has a "read only" protection switch?\015\012\015\012Some of these memory cards do have such a switch on them, on an edge, or near a corner. They are very difficult to notice, but the ... Digital Cameras

I have Olympus t 100 and try update firmware version 1.2, something go wrong. Now my camera not working. Only litle orange light right side on lcd-screen is active (all the time when power is turn on)...:( What i can do???

... Olympus T100 Digital Camera

Video extracting/import I have a video that is 1.77 GB on my camera. I have tried many times and only came up with 2 ways to import it to my computer. Microsoft camera wizard and just trying to drag and drop it to my computer. When I try the wizard, it says it cannot and that there is not enough space. Drag and drop doesnt work and only shows the file as 0 kb. Anyone else experience this ? I know I have plenty of space on my computer !

Download the software from Nikon Support. there is a utility they have for this. ... Nikon Coolpix S550 10 Megapixel Digital Camera (Graphite Black) with 5x Optical Zoom + 4GB Memory Ca

I have a Kodak Z1015IS, about 16 months old, that has not been subject to any type of liquid or damage. One day I went to use it and I was not able to adjust any of the PASM settings (i.e. f-stop, shutter speed, etc.). All other hardware and menu systems work just fine, it is just that the settings are locked in place (at the levels of my prior use). I've tried updating the firmware, formatting the internal memory, and removing the battery with no luck. Just spent time with Kodak, and a

Kodak is right, they don't release any type of technical information about there products to the user, the only ones that can get parts or tech support are the repair centers, sorry but that is just the way they do things, this is not just Kodak it i ... Kodak EasyShare Z1015 IS Digital Camera

The live view function in the software that bundles with the Canon EOS 40D does not work and I cannot shoot from camera direct to PC. I downloaded an update, but still no luck.

... Canon Digital Cameras

Firmware update not working - GoPro Digital Hero 3 Digital Camera

... GoPro Digital Hero 3 Digital Camera

I have kodak easyshare c613 camera wont work, it showing a code lens error 111,0,0,0 and lens error 221,0,0,0. what can i do to get it to work?

Maybe change a new lens will be ok ... Kodak EasyShare M1033 Digital Camera

Firmware updates I currently have firmware v1.2 and i think its in need of an update. Does anyone know where I can get the firmware updates? I looked all over www.nikon.com and couldn't find it. They don't even have the camera listed! www.download.com doesnt have it either

Current firmware revisions for all Nikon products can be found athttp://nikonusa.com/Service-And-Support/index.pageClick on "Niko ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9079 seconds