Having problems with your Canon Digital Cameras ?
powersot s200 digital elph
2004 year of purchase
With the AiAF on or off the monitor screen is blurred and streaky resulting in a similar photographic image.
Repair Help & Product Troubleshooting for Canon Digital Cameras
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Canon powersot s200 digital elph pc 1022 6223711439 2004 year of purchase Problem With the AiAF on or off the monitor screen is blurred and streaky resulting in a similar photographic image.
... Canon Digital Cameras
Blurred images Images are streaky and blurred on the viewing screen and when taken and reviewed
I beleave on auto, the a75 has auto focus, there is a 1/2 second focus time before the picture is taken, enough to blurr the picture ... Canon PowerShot A75 Digital Camera
My Canon PowerShot S400 shows a blurred image on my screen, one that looks like streaks of light. As I pan the camera the streaks move, too. Sometimes, but not consistently, when I take a photo there are streaks on the resultant image, often greenish blue. Here's something else: When I turn the camera on, the lens opens with a series of small clicks, such as might happen if the lenses have been damaged in some way.
It is definitely a CCD issue. First of all how long have you owned the camera? I am guessing it is out of warranty so in most cases it is the best option to purchase a replacement as you will be able to get one twice as good for about as much as the ... Digital Cameras
My Cannon Powershot A95 failed while I was overseas. The image in the viewfinder looked ok but the resulting photos tend heavily toward blues and magentas but worst of all they are vertically 'smeared'. The effect is similar to what you would get if you wet a fresh watercolour picture and held it up. Everything kind of runs down the page. This is a great loss to me as I use it for photographing models owing to the tilting viewfinder feature. The modern cameras are very hard to use close to th
Yes, it can be fixed by local camera repair shop, just ask them to replace its ccd imager chip to get back camera in business.It is ccd imager chip failure in A95 camera and it is common problem with this model. CCD Imager chip replacement requ ... Canon PowerShot A95 Digital Camera
Problem I was taking a photograph of my CCTV camera with infra red night vision. The screen went blurred and then blank. After a few mins the full picture returned but is now a mirror image and upside down! Do you think the infra red is the cause, or is it just coincidental? Can the problem be rectified? I've tried the reset button but nothing happens.
It isnt the infra red.\015\012\015\012on you dvr machine there should be settings or settings on the camera for mirror and flip.\015\012\015\012these are features on better cameras and are normally on the camera body, but veiw ... Samsung Digimax A50 Digital Camera
Camera lens movement mechanism seems to be damaged, as when switched on, the camera lens does not extend out completely and the object appears blurred on the screen. Similarly when switched off, the lens does not retract back completely and it needs a manual push to put it in a little more. But even then it does not go in fully. Rest of the functions are working well. The damage is the result of an accidental body weight going on the camera, when it was in on condition.
Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Digital Cameras
Will sometimes take images that are blurred and a browny red colour! This is inconsistant, I can take a really nice pic then the next one is blurred. I know the pic is going to be a bad one because usually you press the button and the pic shows up on the screen, if it is going to be a poor one, the screen stays blank for at least 30 seconds before displaying the image. I would rather have this problem fixed than have to buy a new camera!
Try changing the mode is in ... Pentax Optio M40 Digital Camera
Only Red When I turn the camera on the screen shows only a blur and not of the image of what I am taking, but just a color blur or a white blur, depending on the lighting. when I take the picture I get what shows on the screen. When I turn off the display and take a picutre the picture comes out like what is on the screen. Please help
This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot S500 IXUS 500 Digital Camera
I have a Carl Zeiss Optical 3x Sony Cybershot. When I flip it open to turn it on, the image is either moving with horizontal lines, or blurred vertically (image looks like it's melting). The photo images come out as they appear on the camera screen. Sometimes the image will appear clear and normal on the camera screen when I flip it open. The camera hasn't been in intense heat or cold.
Hi,It seems some thing thing wrong with CCD Imager or its connections with main board of camera.Let me know exact model number of Sony camera as it would be written at bottom, to provide you solution. Also let me know are you ready to apa ... Digital Cameras
Everything works except showing the image on the monitor prior to taking picture. Play works on monitor, info screen works on monitor and pictures can be taken. Just won't display image on monitor prior to taking picture.
... Olympus EVOLT E-500 Digital Camera
Blur image I have blur image in the screen and when capture, its all blur and unclear.
Try turning on the flash when capturing photos or if you dont want to , use a tripod ... HP Photosmart E317 Digital Camera
No Power After flying on a recent trip and having my camera x-rayed it acted strange. When I turned it on it asked me on screen if I would like to update the software. I selected the no option, then NO IMAGE appeared on the screen. I turned it off and back on again with the same results, update question then no image. I did this again and answered yes to the update question and it began the updating process as indicated on the screen by a bar but never made it past 50%. This went on for 5
Your camera software got corrupted and possibly digital process board need to be replaced.Sony Service centers are providing services for Konica Minolta camera as its announce at Konica-Mino ... Konica Minolta DiMAGE A200 Digital Camera
Hi, the photos i take are getting blurred and the image is not at all clear no matter how shot the distance may be i click the image.the only new icon i see on the screen is vibration warning symbol along with steady shot symbol.i have reset to the default modes but still the blurring of the image persists.Can you pls suggest the possible solution for this. i have a W90 Sony ciber shot camera Thanks in advnace..
If you are shooting in Auto mode with flash, this should solve your problem. Make sure you are not dictating any of the settings, i.e. choosing a longer shutter speed, a very small aperture setting, or a very low ISO (sensitivity) setting. ... Digital Cameras
I have a sony cyper-shot digital camera and have been experiencing a blurred screen as soon as the camera has been switched on and this has remained blurred whilst taking photographs. There is also a code that keeps appearing on the screen at random times. The camera has not been dropped or near any liquids of any kind. If you can offer any solutions as to why the camera may be doing this that would be greatly appreciated. Regards Tammy Mitchell
Focal lens is out alignment inside lens module, requires manually resetting. If you are in the U.K i can help you out with an inexpensive repair . p.m me at [email protected] ... Sony Cyber-shot DSC-W55 Digital Camera
Problem is only with snapping the picture. The screen started out being blurred only AFTER the photo was taken. Now the entire screen is black (no image) after the photo is taken. It just started the blur to black out of the blue (no drops or being knocked around).
Hi,It is known problem of ccd imager chip failure in DSC-T1 camera, ccd imager chip will be replace to get correct live view in camera mode to take fresh pictures.Local camera repair shop will do this job because camera will take apart, l ... Sony Cyber-Shot DSC-T1 Digital Camera
EVF blurred I've had a problem free time with the camera for the last 3/4 yrs. And in the last 2 weeks the view finder image is blurred. The LCD screen is fine, so can still take sharp images. Any suggestions would be much appreciated. thank you.
Try adjusting the diopter. There's a knob near the upper-right corner of the viewfinder. Turn the knob while looking at the viewfinder.See the "Diopter adjustment" section on page 39 of ... Panasonic Lumix DMC-FZ8 Digital Camera
Blurred monitor image
Hi I just experienced the same problem.Could NOT figure out what went wrong.The LCD screen image was blurred and as a result the pics I took were blurry:(\015\012My husband then took over and simply cleaned off the front lens and POOF! It is ba ... Fuji Digital Cameras
Blank Screen I have a Sony Cyber-shot model #DSC-S40. The screen is bright white with an occational blur of the image I am aiming at. I have taken the batteries out several times and that cleared it up one time but has since went back to the white screen. I can still take pictures using the veiw finder but I can not see them on the screen nor can I access any menu functions. The camera still takes awsome pictures so I don't want to just throw it away. Please help! Thank You, Tim
I have been facing the same problem with same model and this is permanent problem it seems with this model (Sony Cybershot DSC S40). It causes because of the following:SYMPTOMSLCD display is either blank or WHITE. When the cabine ... Sony Cyber-Shot DSC-S40 Digital Camera
Image not visible on monitor screen
You need to install camera drivers and application software again. ... Casio QV-R41 Digital Camera
The display screen shows images very distorted like it is too bright and the image "runs" it's really strange. Almost like when you look at a heart beat monitor and it "spikes". I knocked the camera off my desk while trying to charge it, and I am afraid I might have messed up the lens or something. The image is clear when looking at the settings, but the display is very distorted.
Your camera model is one of a number of cameras that had defective CCD imager's installed. These CCD's were produced by Sony and ... Sony Cyber-Shot DSC-T3 Digital Camera
My canon powershot a95 display screen does not show an image when I am trying to take a picture. The image that is displayed is black with white lines and varies in the amount of black and white. No matter what setting I turn to, I can not get the image to appear. It had been working fine till a couple of days ago. It has not been dropped. I get the same result when trying to view a picture of a card. Is there any way to reset the camera?
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera
Canon Powershot A70: LCD screen went blank - I can still access all menu functions (timer, resolution etc), but the screen is completely black otherwise. If i take a picture using the manual view finder, all i get is a completely black photograph. Occasionally, i see a glitter or two on the screen which is black and white (kind of like an unsynced TV image), but then it disappears pretty quickly
I had a A70 that would still take pictures, but the screen did not show a picture. I did some research and found that this is somewhat a common problems with some of the Canon Powershots to include the A70 where the LCD screens expire. I believe th ... Digital Cameras
I have just bought a Lumix FZ18 camera (July 08). It worked perfectly on all settings at first, but has now developed an apparent fault in which it shows an overexposed image on all settings apart from automatic. When the shutter button is partially depressed, the image in the viewfinder or on the screen shows as normal, but when the shutter is activated it immediately reverts to over-exposed and the resulting image is the same. Can you advise please
Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. Fix #2: Remove the bat ... Panasonic Digital Cameras
I have a finepix a510 camera. after putting photographs onto the computer i can no longer view the images on the XD memory card on teh camera, although it says that the card is full - all i get is a blank blue screen that says 'no image'. is there a way of regaining the images? thanks Hugo Verity
There are several recovery programs available. Some free, some not.\015\012Try this out. It will let you know whether the files are recoverable or not. Meanwhile do not try to write any more files to the card.\015\012\015\012 ... Digital Cameras
In camera mode, screen shows a blend of image and digital spectrum analyzer bars blurring the image
The ony way is to get the CCD replaced with a new one. Contact NIKON for free replacement as this comes under manufacturing defect. ... Nikon Coolpix 5700 Digital Camera