Having problems with your Canon Digital Cameras ?
EOS 30D, in manual mode, top dial changes shutter, big dial won't change aperature?
Repair Help & Product Troubleshooting for Canon Digital Cameras
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
EOS 30D, in manual mode, top dial changes shutter, big dial won't change aperature?
... Canon Digital Cameras
How do I change the aperature in the manual mode. As I change the shutter speed using the top dial, that works fine however, I'm having trouble using the dial on the back to change the aperature. What should I do?
Make sure that the power switch is in the correct position.It actually has three positions:\012\012Off\012On (with quick control dial disabled!)\012Third positi ... Canon EOS 40D Digital Camera
I have a Nikon D3 and the main command dial will not change shutter speed. It will change info in the rear control panel but not the shutter speed in the top panel.
... Nikon D3 Digital Camera
Continuous shooting I'm new to this so bare with me. I just got my Nikon D60 and I want to shoot pictures in continuous mode. I set it on manual, go into the menu and change it to continuous. I rotate the dial so it changes the shutter speed but when I take pictures it's just a black screen. As a matter of fact any time I try to take a picture in M it's just black. I'm hoping that there is just a setting I need to change and there's not something wrong with my camera. Thanks.
Hey man. Im not sure how new you are but basically i think your problem is you need to decrease the shutter speed to around 1/200-1/250 of a second and increase the apeture to around f10/12 and see if that works. If your operating at a high shutter s ... Nikon D60 Digital Camera with 18-55mm lens
On the Canon G3 I have issues with the main dial on the handgrip (used for aperture shutter speed and manual focus) while in Manual mode. it will change settings only some of the time! is this usually due to dust in the area and can it be cleaned or otherwise made operational?
Thanx for nothing if and when I fix the problem with the G3 I will likely not tell you so that you can charge $9.99 to the next person to ask the same question. This is the kind of scam that I expected and the likelyhood of hearing back f ... Digital Cameras
I can't seem to get my autofocus to work on my new Canon T1. The mode dial is switched to full auto, the fous mode switch is on AF, and the Image Stabilizer switch is in the "on" position. When I depress the shutter halfway, I get flash indication, some digital numbers, but no change in focus, no beeping, even though it is on and the focus confirmation light does not illuminate. I've searched through the manual to see what I am doing wrong, but can find nothing. Any help you can offer would
Hope I can help with some input to your problem. Let me suggest please that you switch the "mode" dial to "P" for program, check your ISO (I personally shoot ISO 100) and set it for a speed ISO 400 or lower. Most DSLR's use contrast to focus so a mir ... Canon EOS Digital Rebel XTI Digital Camera
Suddenly I can't control the aperture with the sub command dial in the manual mode. I have tried a "hard reset" and the two button reset to factory defaults. In M,A and S modes the shutter and aperture values will disappear and only return after a two button reset.I can adjust the aperture in A mode with the command dial.The shutter speed is adjustable in M mode with the command dial.
In Manual mode only the front dial can be used to set the aperture. That is probably In Aperture mode you can only choose the the Aperture. Shutter speed is automatically chosen. That is why the shutter speed value will disappear.In Shutt ... Nikon D80 Body Only Digital Camera
NIKON D1X Hi I just bought a D1X nikon, in the full manual mode when I change the shutter speed, I can hear no change in the sound it makes when going from 125 to 16K. However the image gets darker as I increase the shutter speed. Is it electronic shutter? Hence no physical increase in shutter speed? Thanks for help.
The shutter is a copal shutter and it does change . Try 125th speed haer the sound and then change to 1/15th . Also you can tell on your histragram inthe camera or the image on your display . ... Nikon D70s Digital Camera
The dial on top that switches from portrait mode to action and other modes turns, but it seems to be "stuck" in portrait mode. The portrait icon shows on the lcd screen, and doesn't change when I turn the dial to other modes. And my pictures look terrible.
... Olympus Camedia C-5060 Wide Zoom Digital Camera
Lost AutoFocus My camera is new, bought 2 days ago, and yesterday I was changing the modes wheel (on top). Then I noticed it couldn't set focus at all, anymore! Should this be a problem with the camera, or can fix it by changing some configuration? At Scene mode, appears a [CAF] icon at left botton of the LCD screen (not documented in manual).
Set focus - it is autofocus is it not?\015\012 Take a few pictures and check whether they are sharp or not\015\012Also make sure your finger is away from the sensor window when holding the camera ... Samsung Digimax S630 Digital Camera
My d90 flashes an err sign somtimes when i shoot at manual mode.. but when i change my apperture and shutter speed setting, it will not appear anymore. Even at auto mode sometimes it flashes an err. Does the d90 flashes an error when you made wrong setting in your apperture and shutter speed?
On page 256 of the D-90 user manual it says that an ERR message indicates a camera malfunction and that the malfunction can be cleared by releasing the shutter. I found that the only way I could release the shutter is to turn the camera off and back ... Nikon D90 Digital Camera with 18-105mm lens
How do you change the shutter speed on a Nikon Coolpix s210? The manual says the shutter speed can be changed, but I can't figure out how. Also, how do you get to "panorama assist" mode?
I can't find in the manual where it says you can manually change the shutter speed. It will change as you select different modes or change the ISO but, I don't believe you can manually change it. ... Nikon Coolpix S210 Digital Camera
I have an EOS Rebel XTi. The Mode dial does not show all zones, ie: It shows Program and Shutter-priority and automatic depth-of-field but does not show Aperture-priority or Manual modes on the setting display when selected on the dial.
Rebel does not have 1.0.4this can be a possible non canon firmware or a beta versionflashing your 1.1.1 may help out with this issue. ... Canon Digital Cameras
Canon Rebel XT I can't change aperture or shutter speed in manual mode
You may try this. Reset all in the menu setup.What you will be doing to to reset all the settings back to factory settings. Then you will want to go through the settings and reset them the way you prefer. ... Canon Rebel XT / EOS 350D Digital Camera
Shutter speed I have had my camera for 6 months. Today I used it for soccer pics and put it on sport mode and every pic I took is blurry. We looked on the information of the pics and the shutter speed is really low. My husband started to look and try to manually adjust some things and the speed will not change. States LOW. I also looked at the soccer portraits I took right before the action shots same day...and some of those are a little blurry as well. What could be wrong? Please help!
It may be a problem of selecting the matrix for auto focus. Single zone is best. ... Nikon D40x Digital Camera
Hi, My D80 has suddenly developed a fault, where it registers the flash as open and in use even when its shut. This has the effect of syncing the shutter speed and limiting it to 1 200th in all modes. In addition, whilst the flash button will still change the flash mode using the command dials, it won't open the flash- almost like the camera thinks the flash is already open. I have tried prising open the flash, and it still doesn't fire even when open. There was no indication of a problem previ
Hi dave_lankest. My suggestion is to do a factory reset on the camera. This is found on page 129 of the manual. Open the rubber flap on the left side of the camera then you will see below the USB port a small button, that is the reset switch. If that ... Nikon D80 Digital Camera with 18-135mm Lens
I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the flash it wont let me change the settings of the flash at all. Apart from this the camera lens shutter seems to be sticking when i turn on the camera it doesnt always open i have tried cleaning the lens but it doesnt seem to make any difference!
I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the f ... Sony Cyber-shot DSC-W70 Digital Camera
I have a K10D 2yrs old little use lots of care and the modes dont change when turning the mode dial between user and manual and the f stop value never shows anywhere
Pentax K10D shutter release won't function, mirror doesn't open, all else normal. ... Pentax K10D Digital Camera with 18-55mm Lens
I changed the exposure compensation to manually bracket photos, changed the D Lighting.Regardless of mode I am in the display indicates the image is to dark and the shutter will not release, where do I go from here?
What do you have the ISO set to? ... Nikon D3000 10.2 Megapixels SLR Digital Camera with 18-55mm VR & 55-200mm DX VR Lens Kit
I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"
Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras
In manual mode cannot set shutter speed to
The "--" is the equivalent of the bulb setting with the remote control. The first press of the button opens the shutter and starts the exposure. Another press of the button closes the shutter and ends the exposure. This is so you don't have to hold t ... Nikon D80 Digital Camera with 18-135mm Lens
The Mode dial on my MAXXUM 7D does not operate. I cannot switch it from manual mode to any other mode (i.e. Program Mode).
... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera
Can't adjust aperature in manual mode.
1. Check the power switch is pointing to the rear dial (not "ON") or you wont be able to set your aperture.\015\0122. Try shooting one image for each position of the mode dial on the top. Then review each image to see what mode the camera indic ... Canon EOS-20D Digital Camera
Nikon D80 with a Sigma Lens (80 to 200 I think). In manual mode, often shutter won't release - this was a close up of a hummingbird with a fast shutter speed. Internal light meter showed underexposed, but the background was dark green. Initially, the shutter released, but later would not operate either with a remote, or by manually depressed the shutter release button. Switching back to auto, the camera seemed to work fine, but in this mode could not get the desired shutter speed. In full manual
In full manual, yes it should. ... Digital Cameras
My flash seems to be stuck in the "suppressed" mode. Also the Manual on page 64 refers to a "turn" of the "command dial" to the "flash mode setting". Since that item is not described anywhere else and the only turnable dial is the "mode" dial, I assume that it means to press the flash mode arrow. When I do that nothing happens. The flash modes do not display as described in the manual. I can't figure out how to get the flash to function properly again. I have made all my attempts with fre
Remove memory card and batteries, press and hold power button for 5 seconds, wait a few more minutes, put just the batteries back in and try it. Also make sure zoom and lens are not dirty and no debris on them. If so, use rubbing alcohol and cotton ... Fuji FinePix S1000FD Digital Camera