Having problems with your Canon Elph 370Z APS Point and Shoot Camera ?
Unable to use time/date set functions.
\015 When the camera is in the "off" position, the dispaly screen shows six blinking dashes across the top, the battery supply display at bottom left and "0" in the exposure count display. There is no response when we attempt to set time and date.\015
Gave up and disposed of camera
Repair Help & Product Troubleshooting for Canon Elph 370Z APS Point and Shoot Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Viewfinder focus I am unable to properly focus using the viewfinder and see a clear focused picture even with trying to use the opitcal zoom. However, I have no problem using the lcd and adjusting the optical zoom to get a clear picture. is there something wrong with the lense or have i inadvertently set a function on the camera.
Mickykay, Have you tried focusing the diopter? The focus wheel is just left of the viewer. If you know all this then consider one more thing. There is a plus and minus setting for your eye so roll the wheel slowly to not miss the sweet spot ... Panasonic Lumix DMC-FZ50K Digital Camera
Unable to use time/date set functions.
Gave up and disposed of camera ... Canon Elph 370Z APS Point and Shoot Camera
When trying to use the shooting functions i get a message that says "not available in these settings". It looks like the macro symbol is in the upper right hand corner. I can't use any of these functions...flash set etc I have an Olympus Stylus 7000
Sounds like you have the macro turned on...turn it off. ... Olympus Stylus 710 Digital Camera
Ixus 500 unable to use menu or setting buttons
There is a problem with your camera you camera’s function button not work due to dust please clean that very care fully before cleaning also battery eject from camera.Hope helpful to you ... Canon PowerShot S500 IXUS 500 Digital Camera
On my D50 the COMMAND DIAL has stopped working so shutter and apertrure cannot be set - but - normal photographs cxan be taken using 'AUTO' or MODE settings on the MODE DIAL. Only P,A,S,M modes cannot be used. Otherwise all functions of the camera work well and photo results are good. The camera has NOT been dropped or jarred.
I have the same issues. Let me know if you got an answer.\015\012Thanks, [email protected] ... Nikon D50 Digital Camera
On May 1, I received my 'repaired' camera (order # CO560900). When I prepared to use it, the date/time screen was displayed so I entered the data and hit 'set'. Nothing happened so I shut off camera and tried again. I entered data, hit 'set' and nothing happened so I tried again,and again and again. The date battery is new and registers 3.23volts I have been unable to use the repaired camera. What shall I do?
Send it back for repair if you are inserting everything correctly.\015\012\015\012We don't have your repair details here, you have to contact the repairer. ... Digital Cameras
I am an artist. I am preparing new works for an upcoming show. I need to send them a file of one paiting which they can use for promotion. They are asking for a 300dpi at 5x7 inches. I suspect the answer may be in the function setting. It is presently set on "AUTO". Since none of the functions indicate dpi, I'm stumped! Thanks Tom Parker [email protected]
They are asking you to send them a picture with the resolution of 1500x2100. Search your camera's menu for a picture quality setting that comes the closest to that. ... Digital Cameras
Coolpix s8000 digital camera: Unable to get red-eye button whn pressing flash mode as per page 31, only 2 options i.e. flash auto and no flash. ISO - unable to change the iso function. Set at manual. Also, unable to change to black and white option. Please help. [email protected]
Dear Friend,\015\012\015\012All the functions are not available on each and every mode. So first ensure that you have selected right function and compatible mode.... but from your question it seems that your cam is not acting as per manual... T ... Nikon Digital Cameras
I havent used my camera for a few years as the lense was broken. I purchased a new one today, but have forgotten how to use my cameras functions. It is a MINOLTA DYNAX 500si and I am also unable to find the the instruction booklet. Please help me. I have forgotten how to use the features on my camera and was wondering how I get another one. So I can start taking beautiful photos.
You can download the manual in two parts.\012\012\012Part 1:http://ca.konicaminolta.com/support/manuals/film-cameras/film_af_slr/dynax_maxxum_400si/Maxxum400siManual-Part1.pdfPart 2:http://ca.konicaminolta.com/support/ma ... Minolta Digital Cameras
My camera will power on only with the front of the body off. I have the front of the body/face plate, 6 small screws and a tiny paper punch sized piece of thin foam out. Everything else is assembled. It will fire up and take pictures without the front of the body/face plate on but as soon as I put it together, it will not work any picture taking functions only the review and set up functions will work. I can also fire it up with the front face plate off replace the front face plate and use the c
... Sony Cyber-Shot DSC-W5 Digital Camera
Blury images Re: Sony Cyber-shot 6mp (DSC-H2) Our outdoor images are beautiful but nearly all of our indoor images are blury/shaky making the camera unusable. We use the Auto Adjustment setting both indoors and outdoors since we are mainly taking candid photos of our kids/family members. We reviewed the menus & manual but we can't figure it out. Is the ''Super Steady Shot'' function turned off? Can I return it to the factory setting? TY in advance.
Hi,\015\012\015\012Firstly, Yes, if you want to reset all settings to factory default you\015\012can do so on most every digital Camera and imaging device that is\015\012manufactured today. \015\012\015\012there are no specific model deta ... Sony Digital Cameras
Hi all, I wonder if you can supply some advice regarding a Sigma17-35mm lens I purchased earlier in the year. Basically if I use the automatic or 'P' setting on my Canon EOS 30D camera the image is over exposed by 1 to 2 stops. If I use the same functions with my Canon 18 -55 kit lens the exposure is correct so I would presume the camera is not causing the problem. The only way I can get a correct exposure with the Sigma lens is to compensate manually for each shot. Please note the exposure p
Try your EOS in AV (aprature value) mode. You should be able to adjust your aperature value in 1/3 or 1/2 steps dependind how you have your Custom Functions set in your camera's menu. Possibly the lens you purchased is for an EOS 35mm. If you use a 3 ... Sigma Digital Cameras
AF TROUBLESHOOTING SUDDENLY WITH NO WARNING THE AF STOPED FUNCTIONING AND THE ASSISTANCE BEEM IS OUT OF ORDER. I HAVE AN EOS 350D RECENTLY PURCHASED. I AM USING RESPECTIVELY SIGMA AND CANON USM LENS. TODAY AND AFTER FILLING THE BATTERY AND INSERTING THEM IN THE GRIP I TURNED ON MY CAMERA AND FOR NO APPARENT REASON EVERYTHING IS WORKING EXCEPT FOR THE AF. IF I TURN IT TO MANUEL THE CAMERA WILL FUNCTION PERFECTLY. I CLEARED THE SETTING AND RETURNED TO THE ORIGINAL STATUS BUT NO RESULT. I TRI
The secondary small mirror that guides the light from the lens to the sensors ( sensors sit at the bottom of the mirror box , underneeth the main mirror ) may be out of position. To check : take lens off and gently lift the main mirror half way up ( ... Canon Rebel XT / EOS 350D Digital Camera
My D70 was working normally when I last used it. I left it safely stored at my vacation home for three months, and when I tried to use it today it appeared to take pictures, all functions seemed to be working, but reviewing the pictures I see only a black monitor. It shows a file number, the info shows exposure details but there is no image. I did a re-set to factory spec, put in a fresh battery, tried several memory cards, all with no success. Looking at the memory card on my computer shows the
The shutter in the camera lens is not working, the motor that controls the aperture has failed or the related gears. This device will require a camera specialist to resolve the issue and an estimate recommended. ... Nikon D70s Digital Camera
I have a EOS 2D Mark II & I can't get all of the functions of the EOS Utility software to work. My computer (windows 7 (64 bit) recognizes the camera but when the utility software opens all but one of the options is not grayed out. I tried reinstalling the software but still have the same issue. Hence, I can't adjust any camera settings or view any photos. I want to use the teathered capture & remote triggering options available but can't. The manual suggest that I connect using the IEEE 1394
I don't see the problem with finding a Firewire cable as they are pretty standard, though I am having trouble finding references to a Canon model EOS 2D. Canon don't seem to have heard of it.Firewire is usually a feature of digital video ... Canon EOS-1D Mark II Digital Camera
I have a problem with the Canon Powershot 850 IS. Most of the functions on the camera (Zoom, menu, display, menu and function set) are frozen and all I can use is the image capture button and the scroll wheel on the upper right hand side. Can you please provide me with a solution to this problem? Thanks, Robert
The issue here is the micro circuit board inside the camera overheats, from what i read canon is aware of this flaw and has repaired free of charge. But you do need to ether take it to a authorized canon shop or return it t ... Canon PowerShot SD850 IS Digital Camera
YASHICA DIGITAL EZ F 527L NOT RECOGNIZE BY PC Respected sir i have purchased your digital camera EZ F 527L. i have used it and it is very smooth and very handy. but when i connected it to my PC it recognize it as unknown device and cannot install it by PC. my system is windows XP home.so please guide me how i can able to recognize and install camera to my PC ? i have another one problem that when i starts camera and set its anti shake function on anti shake it sets on anti shake. but when i swi
Video recoding not audio this camera ... Digital Cameras
I purchased DMC-FZ28 k August 2008. I am not a photographer and used iAuto function and other preset modes. The pics come out "flat" "dull" and lack vibrance and color depth. This is made more obvious when pics are compared to other pics I have taken (older Canon powershot camera) and pics taken by others using their less expensive cameras. This has been this way since new and applies to all sorts of pics - inside, outside, light, flash, etc. I have tried various settings, experiment
I don't know where you are. In the UK, I think I would have tried to take this back to the vendor for a replacement or refund early on (in the first year of ownership), but in other countries your rights may be different. Two years on is a bit late t ... Digital Cameras
Hello... I've been using my sony DSC H5 which is great but recently when I hold the shutter button down halfway to focus does not lock in the image but it does auto focus when pressing the shutter button down. I someone knows a setting to check please let me know since I am unable to find it. thanks....
You need to replace the control assembly, see the solution here:;\015\012http://www.fixya.com/support/t1811939-shutter_button_popped_off_am_out ... Sony Cyber-shot DSC-H5 Digital Camera
I loaded a Mini Digital Camera (3 functions) into my computer with your CD (included) on 4/13/08. Afterwards, I tried to go on-line using my Mozilla Firefox and it wouldn't connect. Instead, a miniature screen approximately 1" x 1" appeared at the top left of my full screen showing a small replica of the Firefox icon, then the minimize, maximize, exit signs. Underneath shows arrows left and right. I uninstalled the mini camera from my computer, but I'm still unable to correct this problem. Ne
Uninstall camera software from add remove program ... Digital Cameras
Our camera (S9500) has mysteriously stopped allowing us to use any of the manual functions in manual mode. The light meter is only working on auto exposure setting.
Yes. contact Fuji and it cost about £14.00, its a doddle to fit.When you recieve it you'll work out how to remove the broken part because you'll understand how it locates, basically a small Pozi screwdriver and a sharp knife to lever the ... Fuji FinePix S9500 Zoom Digital Camera
My Sony Cyber-shot DSC-N1 cameras flash quit working. I have reset (initialized) it and the flash still will not work. I can use all other functions as long as I set it of "no-flash"
Hi,If your Sony DSC-N1 shows blinking error like E:91:xx on its lcd screen when you try to use flash then it is flash circuit board ST-129 problem as that will be replaced to fix the issue.Part number of ST129 board is as follows:A1 ... Sony Cyber-shot DSC-N1 Digital Camera
Drained Batteries I am having a battery problem with my A75, which is my first digital camera. The camera has gone through 2 sets of brand new alkaline batteries since I've had it. I have taken only two photos. I've mostly only turned it on a few times to fool around with it and to try to learn the different functions. The most recent batteries where drained after sitting in the camera for two weeks and taking no photos. Basically, brand new batteries drained after two weeks of no use. The Ca
I use professional $70k cameras for work and it's the same type of thing. If you're not using it, take the batteries out.\015\012\015\012With my A75 I have some energizer 2200mpa rechargeable AA's and the seem to last about a month or so. If I happ ... Canon PowerShot A75 Digital Camera
Photos have a black band at top and bottom. This has never occurred before on my Canon EOS Rebel XT. I use auto mode for all functions and have not changed any menu settings.
If you use the lens in wide and the f lash is not wide as same (if the lens is 18 wide and the f lash is 28 wide ) you will not get good photo so if use 18 mm wide lens then use 18 mm wide f lash and ( i have told about external flash ) ... Canon Rebel XT / EOS 350D Digital Camera
LENSE i BOUGHT A LENSE optomax 300 mm f5.5, with a sliding hood at the end...I put it on my Pentax ist DL but it seems that it's not working.. DO I have to set up the aperture. the shutter is not functioning everytim I use this lense. Pls. Help Thanks.
Make sure the aperture ring is set to the "A" position. If the lens doesn't have an auto aperture setting then I don't think the lens will work. \015\012\015\012There is a setting called "Using Aperture Ring" that you can setup using the menu and c ... Pentax *ist DL (W/18-55 LENS) Digital Camera