Having problems with your Canon Elph Jr. APS Point and Shoot Camera ?

Setting date on Canon elph Jr.

\015 How can I set the date on my Canon Elph Jr. camera? I also need to know what the p, h, and c stand for on back of camera. On the side there is also 3 little buttons - what are they for?\015

Answers :

To set the date:
\015\0121. Press the Date button (rear left button on top of the camera)
\015\0122. Press the Select button (small round button up and to right of date button, may need pen point to press), display may show 97 1 1, with the 97 blinking.
\015\0123. Press the Set button (below the Select button) to change the value of the blinking character.
\015\0124. Press the Select button again to change to the next character. Use Set again to change. Repeat until date is set.
\015\0125. Press the Select button when all characters are set.
\015\012To set time, press the Date button again and the display should change to time (24 hour mode). Use the Select and Set buttons as above to set the correct time.
\015\012C, H, and P indicate the type of picture you want to take. C stands for Classic, and the picture will be in a standard aspect ratio. H is the wide angle setting, and the printed picture will be printed wide angle. P is panoramic, and the printed picture will be even wider angle than H. All this depends on the processor who develops your pictures for you. Ask if their equipment can read and process according to the instructions your camera will automatically put on each exposure on your film.
\015\012The three buttons on the left side are:
\015\012Top -- Flash setting. On (lightning bolt) or Off (lightning bolt with line through it).
\015\012Middle -- Film rewind button. Film should rewind automatically when fully exposed, but you can rewind before the film is fully exposed by using this button.
\015\012Bottom -- Self timer. Pressing this button puts a clock symbol on the display. When this is set, the shutter will delay 10 seconds after the shutter button is pressed. Press this button a second time to turn off the self timer.
Repair Help & Product Troubleshooting for Canon Elph Jr. APS Point and Shoot Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Setting date on Canon elph Jr.

To set the date:\015\0121. Press the Date button (rear left button on top of the camera)\015\0122. Press the Select button (small round button up and to right of date button, may need pen point to press), display may show 97 1 1, with the ... Canon Elph Jr. APS Point and Shoot Camera

How to set date and time on canon power shot elph 100 hs

... Canon Digital Cameras

How to set date, time etc. on the Canon Elph IXUSII

... Canon Elph2 APS Point and Shoot Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?

\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

I am trying to set date time in my camera(canon sx110is). But in every power on it is reseted. Whatever date i am setting in this camera is not stored in the memory. In every power on it asking for setting date and time. I need help in this regard.

You have to change the 'date battery'. Use the user manual to find its location.\015\012\015\012Mine is Canon A520, located beside the cable link sockets. Battery is CR 1220. ... Digital Cameras

Every time I switch on my Canon SD 1100 IS is asks me to set date and time. I set date and time and then it lets me take pictures. Next time I switch it on again it asks to set date and time. How could I get rid of this.

The camera's clock battery has worn out. Unfortunately, on most Canon SD series, this battery is not user serviceable. Recommend contacting Canon to see if they'll replace it, hopefully at a reasonable cost. 1-800-OK-CANON ... Canon PowerShot SD1000 Digital Camera

How do I set camera canon pc1230 550 shot to set date so date will show on developed pictures

... Canon Digital Cameras

Canon A95 - Date and Time setting

Date and time stamp only works in one resolution mode. It's called "Postcard" resolution, and it's the one at 1600 x 1200 pixel width and height. Set your resolution first to Postcard, then set the Date/Time back to on. ... Canon PowerShot A95 Digital Camera

What are the optimal settings for my digital camera? I have a brand new Canon PowerShot 12.1-Megapixel Digital ELPH camera, but I've been really disappointed in the quality of pictures it takes. For example, sometimes there are these smallish blurred white circles on the pictures. Can you recommend optimal settings that I should be using? I use my camera indoors and occasionally outdoors, so whatever settings best cover all different conditions would be ideal.

Small white circles usually means dust on the lens.  Remove the dust with a blowerbrush - not a tissue.\012You are asking for a "1 size fits all" solution for your settings, and indoor and outdoor use really means different settings.   ... Canon PowerShot 12.1-Megapixel Digital ELPH Camera - Silver

I have a canon ixus 9515. It works perfectly apart from the time and date. It sets the time and date no problem and it does adjust the time whilst taking photos. However as soon as the camera is turned off the time and date resets itself to the original information put in

If the camera do not hold the settings ..it means the internal battery is faulty and need to be changed..(equivalent to a bios/cmos battery on computers....it is just a small size battery designed to power the memory for the settings when the batter ... Canon Digital Cameras

How do I set up a Canon G9 to display date and time on image.

Press the "play" button to view your photos. Then, press the "display" button until the time/date show up.\015\012\015\012If you want them to print out the time and date on the photos, you do this in the "Print Settings" menu. Just press the "m ... Canon PowerShot G9 Digital Camera


... Canon PowerShot A410 Digital Camera

How do I set the date on a canon RebelXSi so that

Being digital, most of the information like time, date, aperture, shutter and other EXIF data is already captured on the image file. You can find this information on the computer and even while viewing the image on the camera, thus negating the need ... Canon Rebel XT / EOS 350D Digital Camera

My canon pwoershot g12 will not keep time and date setting

... Canon Powershot G12 10 Megapixel Digital Camera w/ HD Video [4342B001]

Set the date - Canon Prima Zoom 80u Date 35mm Film Camera

... Canon Prima Zoom 80u Date 35mm Film Camera

How to set time @date stamp on canon A710IS. Unable to get to scroll to the Date stamp which is off please help

In canon A710IS the DateStamp is only available when the image mode is \012 set to the Post Card format. If its in any other mode, the option is grayed out. ... Canon PowerShot A710 IS Digital Camera

How to set time @date stamp on canon A710IS - Canon PowerShot A710 IS Digital Camera

... Canon PowerShot A710 IS Digital Camera

How to set time / date on canon sx130is - Canon PowerShot SX130 IS Digital Camera

... Canon PowerShot SX130 IS Digital Camera

How do you set the date stamp on the canon a 480 so the date will show up on all photos?

Follow the instructions in the "Inserting the Date and Time" section of the manual (page 56 in my copy). If you need the manual, you can download one at http://gdlp01.c-wss.com/gds/7/0300001857/01/PSA480_CUG_EN.pdf ... Canon PowerShot A480 Digital Camera

Can not seem to set date to appear on my Canon PowerShot A610 - is it possible? in menu Date Stamp is grayed out

If the current date & time is not set in the root menu, the T&D stamp feature isn't available. Check your quality settings as well.My Canon won't allow stamping on portrait-quality prints, or hi-speed settings. ... Canon PowerShot A75 Digital Camera

How do I set the date and time on my Canon camera? It is a Canon Powershot SX110IS

Just changed date battery still cannot get date on camera ... Canon PowerShot SX100 IS Digital Camera

Canon sd900 how do I get the time and date on my pics I know how to set the time and date but I cant figure out how to get it to come up when I print a picture

Ive encountered this question and someone posted that you can have the date and time stamp if you set the camera on auto mode, then post card 1600-1200 then set the time and date..try it and see if it works on printing too.. tell me it it works.. but ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I need a manual desperately. My husband doesn't have it and the pics are either too dark or distorted, no matter what setting I put it on. I dont' know what all of the setting do to begin with so this makes it all very difficult. The pics I took at my children's baptism are awful....all because I don't have a manual. On the camera is the following: Canon PowerShot SD950 IS (digital elph) 12.1 mega pixels Titanium

Http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_sd_series/powershot_sd950_is#BrochuresAndManuals ... Digital Cameras

When I open my Canon A520, a Date and Time setting always pops up, even when I set it before. I need an immediate answer please. Thank you.

You may need to take it in to the camera place to get the clock mem batery replaced cos it is out of date ... Canon PowerShot A520 Digital Camera

How to set date stamp for canon ixus 860is - Canon IXUS 860 IS Digital Camera

:\015\012 \015\012\015\012\015\012The date and time can be included on the pictures taken only with the camera in postcard mode. You must also activate the date stamp option in the menu.To set the camera into postcard mod ... Canon IXUS 860 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1564 seconds