Having problems with your Canon EOS 400D / Rebel XTi Digital Camera ?

I have a canon rebel xti, I partially blocked the pop-up flash while taking a picture. There is an error message on the screen - flash error 05, turn camera off and on again to clear. It is not working. What can I do?


Answers :

Hi,

You can reset all your settings and clear errors by removing the battery pack and also under the camera is an access screw to get to a button battery or two. The type of screw you use a dime or quarter to open. With the battery pack out, remove the button batteries and leave all those out for several minutes and then with the batteries still out, activate the On switch for your camera and leave it in the full on position for 30 seconds. That should drain off all residual power from the circuit board inside. You will have to reset everything, such as your personal settings in Tools and the time and date setting. All of those user set items, but your error message should clear too. If you get the error message again, right away, after reinstalling the batteries and battery pack, then you have damaged the Flash Unit... but I doubt that. Canon makes a good camera and I don't think what you describe would cause that problem.

Regards,
Worldvet
Repair Help & Product Troubleshooting for Canon EOS 400D / Rebel XTi Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a canon rebel xti, I partially blocked the pop-up flash while taking a picture. There is an error message on the screen - flash error 05, turn camera off and on again to clear. It is not working. What can I do?


Hi,You can reset all your settings and clear errors by removing the battery pack and also under the camera is an access screw to get to a button battery or two. The type of screw you use a dime or quarter to open. With the battery pack ou ... Canon EOS 400D / Rebel XTi Digital Camera

When I turn the camera on I get the message "memory card error". The only button on the camera which then works is the menu button but it just brings up the screen and then the same error message. Yes, I have replaced the memory card and the first memory card works in our other camera so it is not a problem with the card. My computer also fails to recognise the camera when I connect it via the usb port. Any bright ideas?


You need to format the card in the camera. Go into the menu and scroll to "format" and follow the on-screen instructions. This will erase and initialize the card . To download pictures, the most trouble-free way is to use a card reader and download t ... Pentax Optio S4i Digital Camera

E:61:10 My camera just stopped focusing. I can take pictures but they are blurry and my screen flashes the error code E:61:10. I have tried turning it off and on, taking the battery out, changing the settings, nothing works. I can't find a reset button on the camera anywhere. Does anyone know how to resolve this problem? I have a DSC-T20 Sony Cyber Shot digital camera. An error E:61:10 came today all of a sudden. The screen is blurry and the zoom does not work. The camera has not been wet o


Thx a lot guys... The "sony smack" really works... My friend dropped the cam when he was to take a pic of me and my date at a dinner... I was scared, and didn't know what to do until I came to this site...At first it disappeared, but came back after ... Sony Cyber-shot DSC-T20 Digital Camera

Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as


I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera

When I turn on the power button, the orange light flshes on ,then goes off and the green light flashes. Then there is a message on the screen that says zoom error. Then all goes off., How do I get the camera working?


Base from the description of your problem the lens no longer extended or retract that;s why you're receiving this zoom error and this is a issue with the lens mechanism of the camera.We can try this turned on the camera while holding in t ... Olympus SP-320 Digital Camera

We have installed new xD-Picture Card M2GB into Olympus Digital Camera Model No. C-750 Ultra Zoom not work, Screen mentioned Card Error I purchased a 1GB Sandisk (used camera) but when I power camera on I get a "Card ERROR" message. The very first time I powered up I programmed the date and time....but then got the error message. Now I get it every time I turn it on. I don't have another card to test it with:(


Go here\015\012http://www.casio.com/home ... Casio QV-R40 Digital Camera

My panasonic lumix dmc-fx01 has stopped working, When I turn it on, the viewing screen comes on, I see screen and menus, but the scrolling button doesn't work to select, the zoom doesn't work and shoot button doesn't work. When I have camera in play mode and in video mode the screen displays this message: memory card error please check card This happened before, I took it to be repaired and it cost 90 euro to have a bit of dust removed


Navigate to this page ..>Panasonic Lumix Dmc-Fx01 service manual and go to page #20 Disassembly and Assembly ... Panasonic Digital Cameras

I purcahsed a new canon SLR 7D and have an error message on the LCD screen E30. instructions says to remove battery pack or turn off the camera but it seems its not working at all. i have tried so many times but the error message keeps appearing on the LCD screen. What can I do?


According to Canon's Knowledge Base here, this error means that there is ... Canon Digital Cameras

Canon rebel xt eos shows ERR CF. What do I do now?I tried a new flash card but still got the same error message. When I try to preview pictures I have already taken the screen says ¨no image¨. My camera worked for a couple of pictures at one point following this initial error message and then acted up again, showing err 02. It then quickly reverted back to old error CF message.


Check that the pins in the camera that connect to the CF card are clean and not bent. You will probably need a good light and a magnifying glass to see into the card slot. If you can see a pin that is bent you could try straigtening it. BEWARE- turn ... Canon Rebel XT / EOS 350D Digital Camera

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

Lens Error When I turn camera on, green light flashes and a message comes on screen: Lens error, restart camera. The lens is permanently out. Have not dropped camera, don't know what's happened and am not very technical so don't even know how to restart camera! Can't find anything in the Basic User Guide to help me.


It is just telling you to try to turn the camera off and back on. This usually doesn't self correct and will need to be serviced. I would call Canon for support and see what the options are for service or upgrade.Hope this helps! ... Canon PowerShot A460 Digital Camera

E:91:01 hello friend I saw your reply for the e:91:01 flash error. I'd like to ask you if those steps are realy working, i dont have the camera with me right now to test it. but i will do it when i get home later in day. I have a DSC-W50 that now blinks that error. Before this error i had 2 others but i fix them. firstly: while i was turning ON the camera ...lens where comming in and out for 3 times, and message was displayed on LCD that i cant remember right now. Solution: .. i disassembled in


I've had my dsc w50 for about 2.5yrs and its just started the same milarky! Go to menu, set up 1 and re-initialise, it cleared for me then came back again. Went through the same process just now and error has gone for time being, although I think t ... Sony Cyber-shot DSC-W50 Digital Camera

I have a Cyber-Shot DSC-W120. When I go to turn it on, the screen stays black and the lens just goes in and out, then I get an error message to turn off camera and then turn it back on. This is a new camera and I would like to get it fixed. What can I do to make it work?


Try Initializing the Camera. To initialize the Camera. First, press the Home button to display the Home menu. Then, select the Settings option in the Home menu. Then, select the Main Settings1 under the Settings option and set the Initialize under th ... Sony Cyber-shot® DSC-W120 Digital Camera

Hi, all of a sudden, my Canon Rebet XT gave me a faint flashing error 99 message. It won't turn off and the red light at the bottom right of the screen stays on even when I turn my camera off. I have to take the battery out in order for it to turn off. The led screen is blank and shows only the battery icon. HELP, my son is graduating from H.S. and I need to take lots of photos. Thank you.


To isolate the cause of the issue, we suggest that you do the following:\015\0121. Turn off the camera.\015\0122. Remove the lens, battery, and CF card.\015\0123. Allow the camera to sit without power for approximately 20 minutes. ... Canon Rebel XT / EOS 350D Digital Camera

Canon A400 Hi, I have the above camera (canon power shot A400) and have just solved the E18 error by tapping the plastic A/V out cover - THANK YOU ! However, now, although the camera turns on, lense extends and I get full working order - after a few minutes I get the message 'Change batteriers'. and the camera dies. I have now put in several new batteries (including the little(cr1220) but the same message keeps coming up and the screen and the whole thing dies after a few seconds. Is this a furt


Having using standard LR6 batteries in a Canon before you will only get 3 or 4 pics max before it drains the batteries. You really need high power AA's like 2300mAH+ rechargeables for any good performance or Lithium AA's ... Canon PowerShot A400 Digital Camera

Error message When I turn camera on I get following error message; Error 00-00-00 30-00-28 No idea what this means . I can still use playback function to look at photos but can't bring up screen to take photos. I thought it was because memory card was full but have since deleted heaps of photos and it still doesn't work.


... Ricoh Caplio RZ1 Digital Camera

Zoom error I turned my F470 camera on and received a "zoom error" bar across the screen. The lense does not move outwards after I turn the power on, nor does the plastic sliding screen close when I turn the camera off. The lense is exposed whether or not the camera is on or off. The lense does not make any sounds when I turn the camera on, but I hear (what I think) are the gears when I turn the camera off. When the camera is on, the screen is working, but the image is blurry. I tried other poste


Hey MBB722,\015\012 What is most likely going on is there is something stuck in the lens obstructing its movement (i.e. sand). I don't know what you have tried and what you have not tried you can try placing the came ... Fuji FinePix F470 Digital Camera

Olympus DE-510 Zoom When I turn camera on, the screen has a red T at the top, with a box saying Yes, and one saying No. The line at the bottom says Go>OK. If I click OK, I get the same screen again. If I click Yes, I get a Card Error message. I cannot take a photo. I am on a cross country trip, and don't have my manual, but I sure would like to be able to take pictures of the Rockies! I know the camera is old, but I love it. Please help me to get it working again. Thanks, Toni Sinclair


I tried to find more information on the zoom error, and couldn't find much, but I did find a free manual, which might help:\015\012 ... Olympus Camedia D-510 Zoom Digital Camera

I have a Canon rebel xti eos 400d. When you turn the camera on the screen display an error message there is a problem with the CF card. Replace the CF card." I've replaced the card with a spare, and reformatted both. I still receive the same error message. The CF cards work fine in a photo kias.


This could indicate a bad or oxidized conductor leg in the card holder in the camera. You can try to clean it gently with a shaved qtip end and at least 90% isopropyl alcohol. Just be careful not to misalign the contacts. The contacts are solde ... Canon EOS 400D / Rebel XTi Digital Camera

I have a cyber shot DSC-S80 which has been working fine for ages. However I deleted some photos from the memory stick whilst it was in my computer and now I get the 'memory stick error' message flashing everytime I turn the camera on with it in. It works fine in the computer still. Is there a way round this problem? Tried checking for errors with the windows system of my laptop and says there are not any.


Try to format memory stick with the camera's facilities. Maybe the camera doesn't recognize the stick.\012\012\012You can try another memory stick to know exactly what it happened. ... Sony Cyber-Shot DSC-S80 Digital Camera

I have a Nikon S6 digital camera, everything about the camera seems to work fine, except for this "lens error" message I keep getting. Sometimes I'll turn it on, and I can use it just fine. But then there are other times where I have to turn it off and on in order to get it to work. And then there are those times where turning it off and on don't help. I usually give up and try again later. Sometimes it'll still give that error message, and other times, it will just work like normal. What can


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon COOLPIX S6 Digital Camera

Upon turning on my camera the message 'lens error restart camera' appears against black screen. I've turned off the camera and have tried turning on again. Still same message. Prior to the above message, my camera displayed a message 'memory card error card locked' and I was not able to see view my photos. I took out the card to see if it was in a locked position to which it was not. Please help as I have vacation photos on this memory card!


Can't help with the camera- sounds like it has a fault.The photos, however, should be recoverable by putting the memory card into a card reader on a computer. ... Canon PowerShot SD1000 Digital Camera

Error message my nikon D -80 is flahing an error message. When i try to take a photograph i hear it cycle, but nothing is taken. The automatic focus does not work. I think i might have turned the camera off by accident while it was writing a photo to my card *sighs* I have tried removing the battery, a new card, remove and replace the lens, remove lens and clean contact, and talking very sweetly to the camrea. Nothing worked and the same messages is displayed when i turn the camera on. Any advic


This may be due to the aperture ring in your lens. Try the following:\015\012\015\0121. Turn off your camera\015\0122. Move the aperture ring clockwise then lock\015\0123. Turn on your camera and try again.\015\012 ... Nikon D80 Digital Camera with 18-135mm Lens

Error Message I recharged my battery last night after taking pictures and modifying some photos. This morning I turned on my camera because I was going to tr and download pics onto computer. I plugged in cord to the camera and to the printer port (that may have been my mistake) Nothing happened, since the camera wasn't on. I turned on the camera and I got this error message (on a red screen): Camera hs experienced an error. 00000013-2F6B-FFF-298 Please reset your camera I tried the lightly smack


Tried to take pics but got msg that battery is not charge enough to take pics.  I charged the battery overnight and nothing.  I turn on the camera and the little blue light illuminates for 1 sec and goes out, still no charge.  Do I nee ... HP Photosmart R727 Digital Camera

Flash Error Hi there, bought this camera about 6 months ago. I'm intermittently getting a problem with the pop-up flash. It pops up fine, but the screen gives me an error telling me it hasn't and won't take any shots. Have to keep switching it off and on and hoping it will work again. Sometimes it's a couple of days before it works again. It will take shots when I switch the camera to the 'no flash' setting, so it does seem to be just the flash. The error says that the flash release is jamming,


The error 5 can mean that there is something blocking the flash from popping up. If it is up but still get the message then you need to check to see if the little black pin/stick that lets the camera know that the flash is up, is not stuck. With the ... Canon EOS 400D / Rebel XTi Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4583 seconds